A 3-V, 2%-mW multibit current-mode ΣΔ DAC with 100 dBdynamic range

The area ratio of analog to digital for mixed-mode chip has been inversely proportional to the process design rule for a given dynamic range objective, in contradiction to the LSI trend. This paper presents a design approach to realize a high degree of size reduction with process design rules for analog circuitry and a signal processing architecture for digital circuitry. A five-level current-mode ΣΔ digital-to-analog converter (DAC) system reveals full scale total harmonic: distortion plus noise (THD+N) of -90 dB and dynamic-range of 100 dB at 3 V (low power of 22 mW). Analog-area down-scaling can be accomplished by this architecture to be 1.09 mm², using 0.6-μm double-poly double-metal (DPDM) CMOS. For the digital filter, a pipeline instruction sequence with multiplierless architecture also gives small area of 1.98 mm²     

Transplantation of the fetal olfactory placode restores reproductive cycles in female rhesus monkeys (Mucaca mulatta) bearing lesions in the medial basal hypothalamus

The purpose of this study was to determine whether loss of the reproductive cycle after lesions of the medial basal hypothalamus can be reversed by transplantation of the embryonic olfactory placode (OP) into female rhesus monkeys. Seven adult female rhesus monkeys with regular menstrual cycles received bilateral radiofrequency lesions in the arcuate nucleus and the median eminence. After confirmation of anovulation in these monkeys, four monkeys were stereotaxically implanted with the OP obtained from monkey fetuses on embryonic days 35-36. The remaining three monkeys were similarly implanted with embryonic cerebellum (CB) as a control. Fetuses were delivered by cesarean section, and the OP and CB were immediately dissected out using a stereomicroscope. Fetal tissue was then cut into small pieces (< 1 mm3), mixed with artificial cerebrospinal fluid containing small pieces of Gelfoam, and stereotaxically injected into the infundibular recess of the third ventricle. The recovery of ovulatory cycles in recipient monkeys was observed for at least 6 months; sex skin color changes and menstrual records were obtained daily, and serum samples for LH, estrogen, and progesterone were obtained twice a week. Three of four OP-transplanted monkeys resumed their ovulatory cycles within 2 months, whereas the fourth monkey, an elderly female, failed to recover her cycle. In contrast, none of the three CB-transplanted monkeys resumed ovulatory cycles. Histological examination indicated that 1) lesion scars were present in the median eminence-stalk region as well as the medial basal portion of the arcuate nucleus of all seven brains; and 2) cartilage was present in the third ventricles of the OP-implanted brains. Moreover, immunocytochemical staining revealed that in all OP monkeys, small, round, and immature LHRH-positive cells with fine short processes were found in the third ventricle and/or median eminence-stalk region, whereas no similar LHRH cells were found in CB-transplanted monkeys. It is concluded, therefore, that implantation of LHRH neurons derived from the fetal OP can result in resumption of the ovulatory cycle in female monkeys whose own LHRH pulse-generating mechanisms were impaired. Moreover, the results suggest that LHRH neurons derived from embryonic OP possess the physiological functions necessary for the stimulation of gonadotropin secretion.     

Phase Separation in Gelling Silica–Organic Polymer Solution: Systems Containing Poly(sodium styrenesulfonate)

Phase separation which occurs in parallel to the hydrolysis and gelation of alkoxysilane solution containing poly(sodium styrenesulfonate) (NaPSS) has been investigated. Depending on the reaction conditions, gel morphologies such as isolated pores, particle aggregates, and interconnected continuous pores from 0.1 to 100 μm long have been observed. Time-resolved light scattering of gelling solution suggested the occurrence of spinodal phase separation through the polymerization of silica and the subsequent freezing of the developing structure by sol-gel transition. The effects of reaction parameters on the periodic size are explained mainly in terms of their influence on the "chemical cooling" rate which is determined by the polymerizatica rate of silica and the solubility of NaPSS in the reacting solution.     

Spatial distribution of silica fillers in phase-separated rubber blends investigated by three-dimensional elemental mapping

The distribution of nano-sized silica in binary rubber blends is characterized by scanning transmission electron microscopy (STEM) tomography combined with energy dispersive X-ray spectrometry (EDX). 3D distribution of silica is visualized by STEM-EDX tomography with the tilt-series of silicon elemental maps, while the phase-separated morphologies of polyisoprene rubber (IR) and styrene-butadiene rubber (SBR) are visualized by STEM-tomography in high-angle-annular-dark field (HAADF) mode. The combination of STEM-EDX and STEM-HAADF tomography enables us to determine the distribution of silica between the two rubber phases quantitatively even with high contents of silica up to 70 phr (weight parts per hundred rubber). It is found that silica is preferentially distributed in the SBR phase, but it is also distributed in the IR phase when the IR fraction in the total rubber components is higher than 40 wt%. The preferential distribution of silica in the SBR phase improves the dispersion of the IR domains. This is the first use of this technique for a multicomponent polymer system, showing the advantage to characterize the complicated multicomponent polymer composite morphologies.     

Shrinkable Nanotubes for Duplex Formation of Short Nucleotides

Molecular monolayer nanotubes produced by self‐assembly of an amphiphile modified with a 2‐nitrobenzyl group as a photoresponsive unit are able to encapsulate dinucleotides via electrostatic attraction. Upon photoirradiation, the 18 nm inner diameter of the nanotubes shrinks to less than 2 nm as a result of photochemical cleavage of the 2‐nitrobenzyl group in the amphiphile. This shrinking of the nanotube channels leads to a propulsive release of the dinucleotides into the bulk solution and simultaneously accelerates formation of the dinucleotide duplexes. The larger nanotube channels without photoirradiation merely release each dinucleotide into the bulk solution, indicating that the squeezing via transportation in the narrow nanotube channels is necessary for duplex formation. In addition to the size effect, water with a lower polarity confined within the narrow nanotube channels helps to stabilize the energetically unfavorable hydrogen‐bonded base pair between the dinucleotides. This system should enable researchers to perform biological reactions that occur only in specific environments and conditions in living organisms.     

Coulomb explosion following electronic excitation in ion-solid interaction

In atomic collisions in solids by the ions with very strong electronic interaction, it is confirmed that the atomic displacement process is enhanced by electronic excitation. Two experimental results are introduced as examples. The first is the columnar defect formation in a cuprate superconductor Bi₂Sr₂CaCu₂O_x which is irradiated with 3.5 GeV Xe ions, the second is sputtering induced by highly charged ion (HCI) bombardment (Xe^q+; q=15-44). Since there are some indications to show that these phenomena might be the outcome of the Coulomb explosion process, we tried to make a molecular dynamics simulation of the sputtering process based on this Coulomb explosion mechanism. Good agreement between the simulation and experiment was found. For sputtering of electrically conductive materials, the importance of neutralization dynamics of the HCI and the highly charged region in the solid materials was indicated.     

Augmented reality-based block piling game with superimposed collapse prediction

Understanding what cannot be seen is difficult. Physical behavior can be explained on the basis of physical theories even if the behavior cannot be observed. Explanation of what is physically happening in the real world would become easy, however, if annotations were superimposed on the real objects. Herein, the authors demonstrate how an understanding of a physical event can be facilitated by overlapping a real-world situation with a simulation that predicts a future state. This idea is demonstrated in a game application in which a player stacks blocks into a pile until it collapses. In general, it is easy to estimate whether a block on the edge of a table will fall or not. However, it is more difficult to predict whether a stack of many blocks will collapse, and in what manner the stack will collapse. Even though previous research has demonstrated that the problem of how two-dimensionally stacked blocks collapse can be reduced to solving a sequence of convex quadratic programs, algorithms for convex quadratic programs require massive computational resources. Hence, the authors developed a fast and new algorithm based on a linear program. The proposed algorithm realizes real-time simulation based on physics that superimposes predicted collapse. The block that is predicted to fall is superimposed on the real block with a lit background projection. The system was evaluated in an experiment, and superimposed augmented reality annotation was observed to be efficient. The system was also demonstrated in game contests and received positive feedback and comments.