Theoretical model for flash generation

Reduction of flash generated in a gas vent is of great concern for manufacturers of electronic parts. The present study proposes a theoretical model for flash generation through consideration of flow characteristics in a gas vent. The model predicts the factors controlling flash, i.e., material parameters such as zero‐shear viscosity, crystallization temperature, thermal conductivity, and heat capacity, and process parameters such as injection and mold wall temperatures, packing pressure, and the clearance of a gas vent. On the other hand, we measure the amount of flash generated in the molding of poly(phenylene sulfide) (PPS) composites containing glass fiber and spherical fillers (CaCO₃ or Al₂O₃). Flash reduces with decreasing size of spherical fillers. These experimental data are successfully interpreted using the flash model. Polym. Eng. Sci., 45:198–206, 2005. © 2005 Society of Plastics Engineers     

Novel electro-optic properties of epitaxially grown (Pb, La)(Zr, Ti)O3 (PLZT) thin films derived by advanced sol–gel methods

Advanced sol–gel methods using a secondary solvent addition into (Pb, La)(Zr, Ti)O₃ (PLZT) sol–gel solution and a methanol pre-treatment of sapphire substrates are demonstrated. For the secondary solvent addition, the additive affected the crystallinity and electro-optic (EO) property of PLZT films and only methanol addition can improve them. In addition, the methanol pre-treatment is also appeared to be effective to improve film characteristics.

Through these optimizations, epitaxially grown PLZT thin films on r-cut sapphire are obtained and a high Pockels coefficient which is comparable to those of bulk PLZTs is achieved. It is believed that these PLZT thin films are applicable for integrated EO devices and open the door for the future data communication systems.     

Polarization-controlled single-mode VCSEL

Relative intensity noise (RIN) in a vertical-cavity surface-emitting laser (VCSEL) was greatly reduced through the use of polarization control to eliminate competition between two orthogonal polarization states by ensuring there was only one polarization state. Polarization was stable with optical feedback of up to 10%. Polarization control was achieved by inducing a small loss anisotropy in fundamental transversal mode VCSEL's. Anisotropic post structures, such as a rectangular post, an oblique post, or a zigzag-sidewall post, were found to be effective in creating loss anisotropy without serious degradation of other VCSEL characteristics such as light-output power or beam profile     

Inhibition of angiotensin-converting enzyme increases the nitric oxide levels in canine ischemic myocardium

Since angiotensin-converting enzyme (ACE) produces angiotensin II in the heart, ACE inhibitors may prevent coronary vasoconstriction and increase coronary blood flow. On the other hand, since ACE inhibitors also inhibit kininase II which results in reduced degradation of bradykinin, ACE inhibitors may increase cardiac nitric oxide (NO) levels via stimulation of bradykinin receptors. This study was undertaken to test whether ACE inhibitors increase the cardiac NO levels and coronary blood flow in the ischemic myocardium. In 34 open-chest dogs, the left anterior descending coronary artery was perfused through an extracorporeal bypass tube from the left carotid artery. When either imidaprilat or cilazaprilat of 3 microg/kg/min was infused into the bypass tube for 10 min after reduction of coronary blood flow due to partial occlusion of the bypass tube, coronary blood flow increased from 31 +/- 1 to either 45 +/- 5 or 43 +/- 4 ml/100 g/min despite no changes in coronary perfusion pressure (43 +/- 2 mmHg). During an infusion of either imidaprilat or cilazaprilat, bradykinin and the end-products of NO (nitrate + nitrite) concentrations of coronary venous blood were markedly increased, which were attenuated by either HOE-140 (an inhibitor of bradykinin receptors) or by N(omega)-nitro-L-arginine methyl ester (an inhibitor of NO synthase). We also observed increases in cardiac bradykinin and NO levels due to either imidaprilat or cilazaprilat in the low constant coronary blood flow condition. It is concluded that ACE inhibitors can increase cardiac NO levels via the accumulation of bradykinin in the ischemic myocardium.     

Identification of Tumor Suppressive Genes Regulated by miR-31-5p and miR-31-3p in Head and Neck Squamous Cell Carcinoma

We identified the microRNA (miRNA) expression signature of head and neck squamous cell carcinoma (HNSCC) tissues by RNA sequencing, in which 168 miRNAs were significantly upregulated, including both strands of the miR-31 duplex (miR-31-5p and miR-31-3p). The aims of this study were to identify networks of tumor suppressor genes regulated by miR-31-5p and miR-31-3p in HNSCC cells. Our functional assays showed that inhibition of miR-31-5p and miR-31-3p attenuated cancer cell malignant phenotypes (cell proliferation, migration, and invasion), suggesting that they had oncogenic potential in HNSCC cells. Our in silico analysis revealed 146 genes regulated by miR-31 in HNSCC cells. Among these targets, the low expression of seven genes (miR-31-5p targets: CACNB2 and IL34; miR-31-3p targets: CGNL1, CNTN3, GAS7, HOPX, and PBX1) was closely associated with poor prognosis in HNSCC. According to multivariate Cox regression analyses, the expression levels of five of those genes (CACNB2: p = 0.0189; IL34: p = 0.0425; CGNL1: p = 0.0014; CNTN3: p = 0.0304; and GAS7: p = 0.0412) were independent prognostic factors in patients with HNSCC. Our miRNA signature and miRNA-based approach will provide new insights into the molecular pathogenesis of HNSCC.     

Experimental and computational study of gas–solid fluidized bed hydrodynamics

The hydrodynamics of a two-dimensional gas–solid fluidized bed reactor were studied experimentally and computationally. Computational fluid dynamics (CFD) simulation results from a commercial CFD software package, Fluent, were compared to those obtained by experiments conducted in a fluidized bed containing spherical glass beads of 250– in diameter. A multifluid Eulerian model incorporating the kinetic theory for solid particles was applied in order to simulate the gas–solid flow. Momentum exchange coefficients were calculated using the Syamlal–O’Brien, Gidaspow, and Wen–Yu drag functions. The solid-phase kinetic energy fluctuation was characterized by varying the restitution coefficient values from 0.9 to 0.99. The modeling predictions compared reasonably well with experimental bed expansion ratio measurements and qualitative gas–solid flow patterns. Pressure drops predicted by the simulations were in relatively close agreement with experimental measurements at superficial gas velocities higher than the minimum fluidization velocity, U_mf. Furthermore, the predicted instantaneous and time-average local voidage profiles showed similarities with the experimental results. Further experimental and modeling efforts are required in a comparable time and space resolutions for the validation of CFD models for fluidized bed reactors.     

Bottom-up pyramid cellular acceptors with three-dimensional layers

In 1997, C.R. Dyer and A. Rosenfeld introduced an acceptor on a two-dimensional pattern (or tape), called the pyramid cellular acceptor, and demonstrated that many useful recognition tasks are executed by pyramid cellular acceptors in time proportional to the logarithm of the diameter of the input. They also introduced a bottom-up pyramid cellular acceptor which is a restricted version of the pyramid cellular acceptor, and proposed some interesting open problems of the bottom-up pyramid cellular acceptors. On the other hand, we think that the study of threedimensional automata has been meaningful as the computational model of three-dimensional information processing such as computer vision, robotics, and so forth. In this paper, we investigate about bottom-up pyramid cellular acceptors with three-dimensional layers, and show their some accepting powers. This work was presented in part at the 13th International Symposium on Artificial Life and Robotics, Oita, Japan, January 31–February 2, 2008     

Effect of the dilation caused by helium bubbles on edge dislocation motion in α-iron: molecular dynamics simulation

Various types of nanometric defects such as voids and helium (He) bubbles produced by high-energy neutron irradiations are known to degrade the mechanical properties of irradiated materials. In this study, we have evaluated the obstacle strength of He bubbles to the mobility of an edge dislocation in α-iron for 2 and 4 nm bubbles with He-to-vacancy (He/V) ratios ranging from 0 to 1 at 300 and 500 K, by molecular dynamics simulation. Results showed that as the He/V ratio increases, the obstacle strength needed for the release of a dislocation from the bubble becomes stronger up to a moderate He/V ratio (0.6 and 0.4 for 2 and 4 nm bubbles, respectively, at both temperatures), and a further increase in the He/V ratio leads to weakening of the obstacle strength. For He/V = 1, the obstacle strengths are 10–30% weaker than those at moderate He/V ratios depending on the bubble size and temperature. The extent of obstacle strength was found to be correlated with the dilation caused by He bubbles depending on the bubble size, He/V ratio, and temperature.     

Determination of γ-glutamyl-valyl-glycine in raw scallop and processed scallop products using high pressure liquid chromatography–tandem mass spectrometry

The determination of the kokumi peptide, γ-glutamyl-valyl-glycine (γ-Glu-Val-Gly) in raw scallop and processed scallop products was carried out using high pressure liquid chromatography–tandem mass spectrometry (LC/MS/MS). The detection of γ-Glu-Val-Gly was achieved using a multiple reaction monitoring (MRM) method. The optimised condition enabled the precise determination of γ-Glu-Val-Gly. Raw scallop contained 0.08 μg/g γ-Glu-Val-Gly, and the γ-Glu-Val-Gly levels in processed scallop products, such as dried-scallop and scallop extract, were measured to be 0.64 and 0.77 μg/g, respectively. This is the first report to confirm the existence of γ-Glu-Val-Gly in foodstuff.     

Surface Defects on Semicoherent and Incoherent NaCl-Type Carbides Dispersed in Hot-Rolled Ferritic Steel

Metallurgical and Materials Transactions A - The interface structure of semicoherent titanium carbide (TiC) nanoparticles and incoherent micron-sized TiC precipitates in Fe–C–Ti alloy...