Studies on the interactions of metal oxides and Na2 SO4 at 1100 and 1200 K in oxygen

The interaction of different metal oxides such as Co₃O₄, NiO, Al₂O₃, Cr₂O₃, Fe₂O₃ and SiO₂ with Na₂SO₄ at a temperature of 1100 and 1200 K in flowing oxygen has been studied. The thermogravimetric studies for each system were carried out as a function of Na₂SO₄ in the mixture. The presence of different constituents in the reaction products were identified by X-ray diffraction analysis and the morphologies of the reaction products were characterized using metallography and scanning electron microscopy (SEM). The formation of products was also investigated by thermodynamic computation of free energies of the reactions and the study of relevant equilibrium phase diagrams. The soluble species in the aqueous solutions of the reaction products were determined quantitatively using atomic absorption spectrophotometry. The high temperature interaction products usually contain a 3-phase structure namely, Na₂O·M₂O _x , M₂O _x and metal sulphide and/or metal sulphate. The formation of Na₂O·M₂O _x depends upon the solid state solubility of metal oxide in the molten salt at high temperatures. Under limited solubility conditions Na₂O·M₂O _x is invariably formed, but as soon as this condition is relaxed the oxide. M₂O _x , precipitates and forms a separate phase.     

A method of estimating the standard gibbs free energy of formation

Standard Gibbs free energy of formation (ΔG_f⁰), an important property needed in design calculations has been estimated using molar refraction, R_M. The linear relationships derived between ΔG_f⁰ and R_M tested with the data on 8 series of hydrocarbons at 228 compounds yielded average deviations comparable to the methods cited in recent literature. The method can be used as an alternative to the existing ones, because of its simplicity combined with reasonable accuracy.     

Evaporated Thin Films of CdS and CdTe: Optimization for Photovoltaic Applications

Thin films of cadmium sulphide and cadmium telluride have been prepared by thermal evaporation under various conditions of deposition. These films have been characterized optically. electrically and for structure determination. The results of these characterizations along with the initial results of all thin film CdS/CdTe solar cells are presented in this paper     

Applicability of feed-forward and recurrent neural networks to Boolean function complexity modeling

In this paper, we present the feed-forward neural network (FFNN) and recurrent neural network (RNN) models for predicting Boolean function complexity (BFC). In order to acquire the training data for the neural networks (NNs), we conducted experiments for a large number of randomly generated single output Boolean functions (BFs) and derived the simulated graphs for number of min-terms against the BFC for different number of variables. For NN model (NNM) development, we looked at three data transformation techniques for pre-processing the NN-training and validation data. The trained NNMs are used for complexity estimation for the Boolean logic expressions with a given number of variables and sum of products (SOP) terms. Both FFNNs and RNNs were evaluated against the ISCAS benchmark results. Our FFNNs and RNNs were able to predict the BFC with correlations of 0.811 and 0.629 with the benchmark results, respectively.     

Silver Nanoflower Decorated Graphene Oxide Sponges for Highly Sensitive Variable Stiffness Stress Sensors

Soft conductive materials should enable large deformation while keeping high electrical conductivity and elasticity. The graphene oxide (GO)‐based sponge is a potential candidate to endow large deformation. However, it typically exhibits low conductivity and elasticity. Here, the highly conductive and elastic sponge composed of GO, flower‐shaped silver nanoparticles (AgNFs), and polyimide (GO‐AgNF‐PI sponge) are demonstrated. The average pore size and porosity are 114 µm and 94.7%, respectively. Ag NFs have thin petals (8–20 nm) protruding out of the surface of a spherical bud (300–350 nm) significantly enhancing the specific surface area (2.83 m² g^?1). The electrical conductivity (0.306 S m^?1 at 0% strain) of the GO‐AgNF‐PI sponge is increased by more than an order of magnitude with the addition of Ag NFs. A nearly perfect elasticity is obtained over a wide compressive strain range (0–90%). The strain‐dependent, nonlinear variation of Young's modulus of the sponge provides a unique opportunity as a variable stiffness stress sensor that operates over a wide stress range (0–10 kPa) with a high maximum sensitivity (0.572 kPa^?1). It allows grasping of a soft rose and a hard bottle, with the minimal object deformation, when attached on the finger of a robot gripper.     

Energy metabolism and fuel mobilization: from the perioperative period to recovery

PURPOSE: Previous studies of monochromatic visual evoked potentials confirm the strong suppression of (the cortical representation of) paracentral retinal areas of functionally amblyopic eyes, by a flat response to a blue stimulus. A clinical trial stimulating these areas with blue light was encouraging, and justified a prospective comparison of this treatment with conventional classic treatment. SUBJECTS AND METHODS: In 50 strabismic children with amblyopia, the blue filter treatment protocol (flash stimulation with, and the wearing of, a blue filter during occlusion of the better eye for one hour daily) was compared with the classical treatment (full time total occlusion by patch) in a prospective matched and randomized study. Patients 3 to 7 years old without previous treatment and a visual acuity up to 0.3 were admitted to the study. Visual acuity and fixation behavior were used as the parameters of comparison. Visual Evoked Potentials by monochromatic flashes were also studied. Results of treatment were compared after 6 months. RESULTS: The visual acuity outcome for the blue filter treatment was "statistically significantly" better (p=0.005). The greatest improvement was seen in the subgroup of children with eccentric fixation (p=0.01). Fixation behavior also showed a better outcome from the blue filter treatment (p=0.05) favoring especially children between 3 and 5 years. In children of this age with a visual acuity better than 0.1 we found a very "statistically significant" difference between the two treatments (p=0.004). In children 3 to 5 years old with poorer visual acuity we also found a "statistically significant" difference in the two treatments (p=0.04). The interocular difference of amplitude on the Visual Evoked Potentials also demonstrated more improvement in children treated with the blue filter. This treatment improved especially the cortical response to blue flash stimulation, correlating to paracentral retinal areas. CONCLUSIONS: The blue filter treatment protocol provided better results for treating amblyopia than the conventional classic occlusion treatment method. We propose that stimulation of these paracentral retinal areas triggers a better disinhibition of a functionally amblyopic eye.     

The effect of hydrogen in the mechanism of aluminum-induced crystallization of sputtered amorphous silicon using scanning Auger microanalysis

The metal-induced crystallization (MIC) of hydrogenated sputtered amorphous silicon (a-Si:H) using aluminum has been investigated using X-ray diffraction (XRD) and scanning Auger microanalysis (SAM). Hydrogenated, as well as non-hydrogenated, amorphous silicon (a-Si) films were sputtered on glass substrates, then capped with a thin layer of Al. Following the depositions, the samples were annealed in the temperature range 200 °C to 400 °C for varying periods of time. Crystallization of the samples was confirmed by XRD. Non-hydrogenated films started to crystallize at 350 °C. On the other hand, crystallization of the samples with the highest hydrogen (H₂) content initiated at 225 °C. Thus, the crystallization temperature is affected by the H₂ content of the a-Si. Material structure following annealing was confirmed by SAM. In this paper, a comprehensive model for MIC of a-Si is developed based on these experimental results.     

Alumina Agglomerate Effects on Toughness-Curve Behavior of Alumina–Mullite Composites

Toughness-curve ( T -curve) behavior of composites of spherical, polycrystalline, coarse-grained, alumina agglomerates dispersed throughout a constant-toughness, fine-grained, 50–50 vol% alumina–mullite matrix has been evaluated as a function of agglomerate content for the range 15 to 45 vol%. T -curve behavior was evaluated using the indentation-strength method. Increasing alumina agglomerate content resulted in a progressive increase of large indentation load strengths with negligible change of plateau strength levels at small indentation loads. This behavior is consistent with underlying T -curves that rise to greater values and are shifted toward longer crack lengths with increasing agglomerate content, suggesting that both bridge spacing and bridge potency increase with increasing agglomerate content over the range tested. The proposed relationships between bridge spacing and agglomerate content, and bridge potency and agglomerate content, are rationalized in terms of residual stress considerations. The indentation-strength data also demonstrated that the composite containing the greatest alumina agglomerate content, 45 vol%, exhibited the greatest flaw tolerance.     

[N_2]_2二聚物激光介质研究

理论上通过从头算法 (abinitio)计算强相互作用的N2 分子二聚物可能存在的 6种点群构型的势能曲线 ,证明N2 分子二聚物以D2h 对称群构型存在 ,且存在电偶极允许的类准分子跃迁a1B2 g →a1B3u,并计算了a1B2 g →a1B3u 跃迁的荧光谱。估算了N2 分子二聚物 ( 3 3 6 2 1nm)的小信号增益系数。利用微波 ( 2 45GHz)激励高纯氮 ,实验观测了N2 分子二聚物的系列荧光谱带 ,并利用放大自发辐射 (ASE)法测量N2 分子二聚物 ( 3 3 6 2 1nm)的小信号增益系数 ,在误差范围内与理论估算基本一致。最后从理论上估算了N2 分子二聚物激光振荡的输出功率。