Model Validation for Bridge-Road-Vehicle Dynamic Interaction System

The dynamic response of highway bridges subjected to moving truckloads has been observed to be dependent on (1) dynamic characteristics of the bridge; (2) truck configuration, speed, and lane position on the bridge; and (3) road surface roughness profile of the bridge and its approach. Historically, truckloads were measured to determine the load spectra for girder bridges. However, truckload measurements are either made for a short period of time [for example, weigh-in-motion (WIM) data] or are statistically biased (for example, weigh stations) and cost prohibitive. The objective of this paper is to present results of a 3D computer-based model for the simulation of multiple trucks on girder bridges. The model is based on the grillage approach and is applied to four steel girder bridges tested under normal truck traffic. Actual truckload data collected using a discrete bridge WIM system are used in the model. The data include axle loads, truck gross weight, axle configuration, and statistical data on multiple presence (side by side or following). The results are presented as a function of the static and dynamic stresses in each girder and compared with code provisions for dynamic load factor. The study provides an alternate method for the development of live-load models for bridge design and evaluation.     

Evaluation of Laminated Circular Elastomeric Bearings

This paper evaluates the behavior and performance of laminated circular elastomeric bearings and compares them to those of square and rectangular bearings. The study included an experimental evaluation and a nationwide survey of state Department of Transportations on the use and performance of circular bearings and bearings in general in their states. The experimental investigation studied the bearings' behavior in compression, compression and rotation, and compression and shear. Results from this limited study showed that the three bearings have similar stress-strain behavior in compression and they are in agreement with the AASHTO LRFD guide stress–strain curves. In compression and rotation, the AASHTO LRFD substructure moments are slightly less than the measured values for circular bearings and rectangular bearings rotated about their strong axis for a compressive stress of 10.3?MPa (1.5?ksi) and slightly higher than those of rectangular bearings rotated about their weak axis. In compression and shear, the shear stiffness of circular and square bearings is in agreement with theoretical values within the range of design displacements. Results from the survey showed that many states are using circular bearings and more states would consider using them, however no maintenance or monitoring data were available on their short-term and long-term performance.     

Novel hybrid DNN approaches for speaker verification in emotional and stressful talking environments

Neural Computing and Applications - In this work, we conducted an empirical comparative study of the performance of text-independent speaker verification in emotional and stressful environments....     

Automated detection of ocular alignment with binocular retinal birefringence scanning

We previously developed a retinal birefingence scanning (RBS) device to detect eye fixation. The purpose of this study was to determine whether a new binocular RBS (BRBS) instrument can detect simultaneous fixation of both eyes. Control (nonmyopic and myopic) and strabismic subjects were studied by use of BRBS at a fixation distance of 45 cm. Binocularity (the percentage of measurements with bilateral fixation) was determined from the BRBS output. All nonstrabismic subjects with good quality signals had binocularity >75%. Binocularity averaged 5% in four subjects with strabismus (range of 0-20%). BRBS may potentially be used to screen individuals for abnormal eye alignment.     

Laser-generated spark morphology and temperature records from emission and Rayleigh scattering studies

Using both Rayleigh scattering and time-resolved emission spectroscopy, we have recorded the spatial and temporal evolution of laser-generated sparks in argon from changes during the first ten of nano-seconds to complete dissipation, which occurs in a time span of approximately 5 ms. Maps of either emission intensity or argon density spanning the entire region affected by the energy deposited by the laser show the dissipation of the spark in detail. Immediately after ignition, the argon plasma occupies an ellipsoidal volume of roughly 3-mm vertical (axial) length. After approximately 20-40 micros, the spark region has transformed into a toroidal shape in a plane perpendicular to the vertical axis, with a radius of approximately 1.5 mm. The torus rises slowly up and expands noticeably in the radial direction. A record of peak temperatures of the spark ranging from approximately 10,000 K at 60-micros delay time to approximately 450 K at 4-ms delay time indicate cooling rates from approximately 100 to 1 K/micros at these times.     

Role of glycosylation at Ser63 in production of soluble pilin in pathogenic Neisseria

Pilus-mediated adhesion is essential in the pathogenesis of Neisseria meningitidis (MC) and Neisseria gonorrhoeae (GC). Pili are assembled from a protein subunit called pilin. Pilin is a glycoprotein, and pilin antigenic variation has been shown to be responsible for intrastrain variability with respect to the degree of adhesion in both MC and GC. In MC, high-adhesion pilins are responsible for the formation of bundles of pili which bind bacteria and cause them to grow as colonies on infected monolayers. In this work, we selected MC and GC pilin variants responsible for high and low adhesiveness and introduced them into the other species. Our results demonstrated that a given pilin variant expressed an identical phenotype in either GC or MC with respect to bundling and adhesiveness to epithelial cells. However, the production of truncated soluble pilin (S pilin) was consistently more abundant in GC than in MC. In the latter species, the glycosylation of pilin at Ser63 was shown to be required for the production of a truncated monomer of S pilin. In order to determine whether the same was true for GC, we engineered various pilin derivatives with an altered Ser63 glycosylation site. The results of these experiments demonstrated that the production of S pilin in GC was indeed more abundant when pilin was posttranslationally modified at Ser63. However, nonglycosylated variants remained capable of producing large amounts of S pilin. These data demonstrated that for GC, unlike for MC, glycosylation at Ser63 is not required for S-pilin production, suggesting that the mechanisms leading to the production of S pilin in GC and MC are different.     

Self-tuning dynamic models of HVAC system components

A great majority of modern buildings are equipped with Energy Management and Control Systems (EMCS) which monitor and collect operating data from different components of heating ventilating and air conditioning (HVAC) systems. Models derived and tuned by using the collected data can be incorporated into the EMCS for online prediction of the system performance. To that end, HVAC component models with self-tuning parameters were developed and validated in this paper. The model parameters were tuned online by using a genetic algorithm which minimizes the error between measured and estimated performance data. The developed models included: a zone temperature model, return air enthalpy/humidity and CO₂ concentration models, a cooling and heating coil model, and a fan model. The study also includes tools for estimating the thermal and ventilation loads. The models were validated against real data gathered from an existing HVAC system. The validation results show that the component models augmented with an online parameter tuner, significantly improved the accuracy of predicted outputs. The use of such models offers several advantages such as designing better real-time control, optimization of overall system performance, and online fault detection.     

New test method for drill-bit teeth

A bench for impact-resistance testing of teeth, the sequence of the tests, and the selection of testing regimes, as well as results of investigation of the effect exerted by the pressure in hydraulic system on the percussive force with the tooth raised to different heights above the plate and for a load frequency of 4 Hz are presented.     

Meningitis due to Bacillus cereus in an infant with Reye syndrome

OBSERVATION: We report the case of a 2.5-month-old infant with Bacillus cereus meningitis who was initially admitted for Reye syndrome. Gram positive bacteria was isolated in CSF and shown to be located inside the polymorphonuclears. This pathogen was further identified by sequencing of the 16S RNA. Early administration of imipenem in association with amikacin resulted in a rapid recovery. No obvious immune defect or invasive procedure could be assessed. CONCLUSION: Although Bacillus cereus is mainly associated with contamination, repeated isolations of this bacteria may be due to true infection.     

Interleukin-8 concentration predicts the neutrophil count in middle ear effusion

Interleukin-8 (IL-8), a potent neutrophilic chemoattractant and inflammatory cytokine, is present in middle ear effusions (MEEs) of children with otitis media and is thought to be responsible for the accumulation of neutrophils in MEEs. We hypothesized that IL-8 concentration predicts the total number and proportion of neutrophils in MEEs. IL-8 concentration and total and differential cell counts were measured in MEEs of children undergoing tympanostomy tube placement for otitis media. IL-8 was present in 80 (98%) of 82 effusions. The mean +/- SEM value for IL-8 was 7342 +/- 847 pg/mL. The mean +/- SEM count and percentage of neutrophils were 1.34 x 10(6) +/- 3.44 x 10(5) and 70.6 +/- 3.1%, respectively. IL-8 concentrations correlated positively with the total number (r = +0.30; P = 0.02) and percentage of neutrophils (r = +0.32; P = 0.01) in the effusion. Additionally, purulent effusions had greater IL-8 concentrations (P = 0.003) and greater neutrophil count (P = 0.03) than mucoid or serous effusions. We conclude that IL-8 is consistently present in MEEs of children and IL-8 concentration predicts the total number and proportion of neutrophils. Furthermore, IL-8 concentration and the total number of neutrophils correlate positively with the type of effusion. These results support the hypothesis that IL-8 recruits neutrophils to the middle ear in MEEs.