Condensation polymerization of pyrogallol and benzaldehyde

Novolac-type polycondensation of benzaldehyde (B) and pyrogallol (P) has been carried out at 60°C, 75°C and 90°C and at B/P mole ratios of 1.5 and 3.0 using phosphoric acid as catalyst. The reaction follows a 2nd order rate law. By using GC consumption data of benzaldehyde and pyrogallol, kinetic parameters such as the overall rate constants, activation energies (E_a) and logA values are investigated. The activation energies for 1.5 and 3.0 B/P mole ratios are found as 62.3 kJ mol^?1 and 56.4 kJ mol^?1, respectively. The molecular weights of the resins determined by measuring intrinsic viscosities (25°C, THF) are in the range of 0.03 to 0.07 dL g^?1 at various temperatures and B/P mole ratios.     

A combo technology of autotrophic and heterotrophic denitrification processes for groundwater treatment

In this study,a sequential process (heterotrophic up-flow column and completely mixed membrane bioreactors) was proposed combining advantages of the both processes.The system was operated for 249 days with simulated and real groundwater for nitrate removal at concentrations varying from 25 to 145 mg·L-1 NO3-N.The contribution of heterotrophic process to total nitrate removal in the system was controlled by dozing the ethanol considering the nitrate concentration.By this way,sulfur based autotrophic denitrification rate was decreased and the effluent sulfate concentrations were controlled.The alkalinity requirement in the autotrophic process was produced in the heterotrophic reactor,and the system was operated without alkalinity supplementation.Throughout the study,the chemical oxygen demand in the heterotrophic reactor effluent was (23.7 ± 22) mg·L-1 and it was further decreased to(7.5 ± 7.2) mg·L-1 in the system effluent,corresponding to a 70％ reduction.In the last period of the study,the real groundwater containing 145 mg·L-1 NO3-N was completely removed.Membrane was operated without chemical washing in the first 114 days.Between days 115-249 weekly chemical washing was required.     

Improvement of flexural bond strength of zirconia-resin cement by surface patterning using sub-nanosecond UV laser

Zirconia is a dental material that shows excellent biocompatibility and high strength in clinical applications. This study aims to evaluate the effects of ultrafast laser applications. The surface nanostructures were classified into three groups. Group 1 was generated using the burst mode, with three different distances between dots: 52 µm (Group 1a), 104 µm (Group 1b), and 156 µm (Group 1c). Group 2 was processed using the scanning mode configuration, with a set of parallel lines. Group 3 was also processed using this scanning configuration creating a set of square-shaped patterning. Group 4 was the control group. After the surface treatments, a pair of zirconia specimens was bonded end to end with resin cement. Flexural bond strength (FBS) test was applied in a universal test machine. Multiple comparisons were performed using a one-way analysis of variance and the Tukey's HSD test. All the samples that were treated with the laser showed higher FBS values than the untreated surface. Using the burst mode, preformed circular-shaped surface on an angle of 90⁰ at 52 µm distance (Group 1a) showed the highest FBS values among all groups (p < .05). Groups 2 and 3 had significantly higher values than 1b and 1c.     

Heat‐resistant hydrophobic–oleophobic coatings

Thermally and chemically durable hydrophobic oleophobic coatings, containing different ceramic particles such as SiO₂, SiC, Al₂O₃, which can be alternative instead of Teflon, have been developed and applied on the aluminum substrates by spin‐coating method. Polyimides, which are high‐thermal resistant heteroaromatic polymers, were synthesized, and fluor oligomers were added to these polymers to obtain hydrophobic–oleophobic properties. After coating, Al surface was subjected to Taber‐abrasion, adhesion, corrosion, and thermal tests. The effects of the particle size of ceramic powders, organic matrix, and heat on the coating material were investigated. Coating material was characterized by FTIR spectrophotometer. Surface properties and thermal resistance of the coating materials were investigated by SEM and TGA analyses. After thermal curing, contact angles of these coatings with H₂O and n‐hexadecane were measured. It was observed that coatings like ceramic particles are more resistant against scratch and abrasion than the other coatings. Also, they are harder than coatings, which do not include ceramic particles. It was seen that coatings, containing Fluorolink D10H, have high‐contact angles with water and n‐hexadecane. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2386–2392, 2006     

Estimation of Peak Flood Discharges at Ungauged Sites Across Turkey

The reliable forecasting of the peak flood discharge at river basins is a common problem, and it becomes more complicated when there is inadequate recorded data. The statistical methods commonly used for the estimation of peak flood discharges are generally considered to be inadequate because of the complexity of this problem. Recently, genetic programming (GP) which is a branch of soft computing methods has attracted the attention of the hydrologists. In this study, gene-expression programming (GEP) and linear genetic programming (LGP), which are extensions to GP, in addition to logistic regression (LR) were employed in order to forecast peak flood discharges. The study covered 543 ungauged sites across Turkey. Drainage area, elevation, latitude, longitude, and return period were used as the inputs while the peak flood discharge was the output. Model comparison results revealed that GEP predicted the peak flood discharges with R ²?=?57.4?% correlation, LGP with 56?% and LR model with 42.3?%, respectively. The peak flood discharges in all river basins can now be determined using the single equation provided by the GEP model.     

Electrically controlled release of 5-fluorouracil from conductive gelatin methacryloyl-based hydrogels

Herein, electro-responsive hydrogels were obtained by incorporation of poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) into the gelatin methacryloyl (GelMA) by using photopolymerization technique. Hydrogels were characterized by FTIR and scanning electron microscopy analyses. Cytotoxicity tests were performed by L929 cell lines to determine cell compatibility. Swelling tests were conducted to investigate the water uptake capacity of hydrogels. 5-fluorouracil (5-FU) was selected as a model drug as it is known as a topical drug for some skin cancer type treatment. The release of 5-FU from the hydrogel was provided in efficient and controlled manner at simulated skin cancer (pH = 5.5) and under 0 and 1.5 V. The simulated drug delivery experiments conducted in vitro revealed that the drug releasing amount was higher when voltage is applied to the hydrogels. All results visualized that the obtained GelMA-based PEDOT/PSS hydrogels with enhanced electrical properties could be a potential candidate as an electrically sensitive drug carrier for treatment of skin cancer in the future applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46914.     

Using of Photoluminescent Tile for Evacuation of the Buildings During Electrical Failure

Photoluminescent pigments could be successfully applied on the wall tiles, floor tiles and porcelain tiles as well as glass substrates （glass mosaics, borders, and cutted glass with various designs）. For this applications, these products can be used for different purposes. In this study, these pigments are applied on the ceramic tiles and glass mosaics/tiles with traditional ceramic production line. These products are intentended to provide guidance in the event of a power failure. With this study also aimed to prevent potential accidents and injury during evacuation of building.     

The Water-Soluble Peripheral Substituted Phthalocyanines as Corrosion Inhibitors for Copper in 0.1 N HCl: Gravimetric,Electrochemical, SEM-EDS,and Quantum Chemical Calculations

Protection of Metals and Physical Chemistry of Surfaces - Corrosion inhibition effects of water-soluble peripheral substituted cobalt, copper and zinc metallophthalocyanines (CoPc (1), CuPc (2) and...     

Geochemical characteristics of major and trace elements in Sahinali Coals,Aydin, Turkey

In this study, geochemical behavior of elements is investigated in 25 coal samples collected at 10 locations of ?ahinli coaliferous units at southeast of Ayd?n, Turkey. In all the samples, X-ray powder diffraction and inductively coupled plasma mass spectrometry analyses were performed and element and mineral compositions were determined. Total organic carbon (TOC) values of coals are between 14.6 and 37.7 wt% with average of 28.5 wt%. Samples are composed of quartz, calcite, feldspar, dolomite, mica, gypsum, and salt minerals which are accompanied by illite-, kaolinite-, and smectite-type clay minerals. Comparison of average element contents of world coals and studied samples yields that K > Fe > As > U > Cs > Y > Er > Al > Th > Rb > Yb > W > Tb > Dy > Lu > Ce > Sm > La > Ho > Si > Nd > Gd > Tm > Eu > Nb > Pr > Pb > Sn > Ni > Cu > Ga > Ta > Sb > Zr > Cd > V > Zn > Co > Mo > P > Hf > Ba are found to be enriched, while Mn > Be > Ca > Sr > Bi > Mg are found to be depleted. Statistically elements are correlated with TOC.     

Effects of mixing techniques and dentin moisture conditions on push-out bond strength of ProRoot MTA and Biodentine

Objective: To evaluate the influence of manual and mechanical mixing techniques as well as the effects of moisture on the push-out bond strength of ProRoot MTA (Dentsply Tulsa Dental, Tulsa, OK, USA) and Biodentine (Septodont, Saint Maur des Fosses, France) to radicular dentin.

Material and methods: Two hundred and forty dentin discs were assigned into three groups with respect to the moisture condition tested: (1) dry, (2) paper points, (3) wet. The discs were further divided into four subgroups according to the calcium silicate cements (CSCs) and mixing techniques used: (1) ProRoot MTA mixed manually, (2) ProRoot MTA mixed mechanically, (3) Biodentine mixed manually, and (4) Biodentine mixed mechanically. Bond strengths of the cements to root canal dentin were measured using a push-out test setup. The data were statistically analyzed using three-way ANOVA and Bonferroni post hoc test p = 0.05.

Results: The data indicated that the push-out bond strength values were significantly affected by CSCs, mixing techniques, and moisture conditions (p < 0.001). Dry conditions caused a significant decrease in bond strength values for both CSCs (p < 0.001). The mean bond strength of Biodentine was significantly higher than that of ProRoot MTA, regardless of the mixing techniques and moisture conditions (p < 0.001). Mechanical mixing favored bond strength values statistically compared to manual mixing (p < .001).

Conclusion: The mixing techniques and moisture conditions have an effect on the push-out bond strengths of ProRoot MTA and Biodentine. Dry samples and manual mixing of cements deteriorate the push-out bond strengths values.