Facile Microwave Assisted Synthesis of Silver Nanostars for Ultrasensitive Detection of Biological Analytes by SERS

We report a very simple, rapid and reproducible method for the fabrication of anisotropic silver nanostars (AgNS) that can be successfully used as highly efficient SERS substrates for different bioanalytes, even in the case of a near-infra-red (NIR) excitation laser. The nanostars have been synthesized using the chemical reduction of Ag⁺ ions by trisodium citrate. This is the first research reporting the synthesis of AgNS using only trisodium citrate as a reducing and stabilizing agent. The key elements of this original synthesis procedure are rapid hydrothermal synthesis of silver nanostars followed by a cooling down procedure by immersion in a water bath. The synthesis was performed in a sealed bottom flask homogenously heated and brought to a boil in a microwave oven. After 60 s, the colloidal solution was cooled down to room temperature by immersion in a water bath at 35 °C. The as-synthesized AgNS were washed by centrifugation and used for SERS analysis of test molecules (methylene blue) as well as biological analytes: pharmaceutical compounds with various Raman cross sections (doxorubicin, atenolol & metoprolol), cell lysates and amino acids (methionine & cysteine). UV-Vis absorption spectroscopy, (Scanning) Transmission Electron Microscopy ((S)TEM) and Atomic Force Microscopy (AFM) have been employed for investigating nanostars’ physical properties.     

New Poly(N-isopropylacrylamide-butylacrylate) Copolymer Biointerfaces and Their Characteristic Influence on Cell Behavior In Vitro

Designing and obtaining new synthetic smart biointerfaces with specific and controlled characteristics relevant for applications in biomedical and bioengineering domains represents one of the main challenges in these fields. In this work, Matrix-Assisted Pulsed Laser Evaporation (MAPLE) is used to obtain synthetic biointerfaces of poly(N-isopropyl acrylamide-butyl acrylate) p(NIPAM-BA) copolymer with different characteristics (i.e., roughness, porosity, wettability), and their effect on normal HEK 293 T and murine melanoma B16-F1 cells is studied. For this, the influence of various solvents (chloroform, dimethylsulfoxide, water) and fluence variation (250–450 mJ/cm²) on the morphological, roughness, wettability, and physico–chemical characteristics of the coatings are evaluated by atomic force microscopy, scanning electron microscopy, contact angle measurements, Fourier-transform-IR spectroscopy, and X-ray photoelectron spectroscopy. Coatings obtained by the spin coating method are used for reference. No significant alteration in the chemistry of the surfaces is observed for the coatings obtained by both methods. All p(NIPAM-BA) coatings show hydrophilic character, with the exception of those obtained with chloroform at 250 mJ/cm². The surface morphology is shown to depend on both solvent type and laser fluence and it ranges from smooth surfaces to rough and porous ones. Physico–chemical and biological analysis reveal that the MAPLE deposition method with fluences of 350–450 mJ/cm² when using DMSO solvent is more appropriate for bioengineering applications due to the surface characteristics (i.e., pore presence) and to the good compatibility with normal cells and cytotoxicity against melanoma cells.     

Microwave-Assisted Synthesis of Phenothiazine and Quinoline Derivatives

Application of a dynamic microwave power system in the chemical synthesis of some phenothiazine and quinoline derivatives is described. Heterocyclic ring formation, aromatic nucleophilic substitution and heterocyclic aldehydes/ketones condensation reactions were performed on solid support, or under solvent free reaction conditions. The microwave-assisted Duff formylation of phenothiazine was achieved. Comparison of microwave-assisted synthesis with the conventional synthetic methods demonstrates advantages related to shorter reaction times and in some cases better reaction yields.     

On the semantics of noun compounds

This paper provides new insights on the semantic characteristics of two and three noun compounds. An analysis is performed using two sets of semantic classification categories: a list of 8 prepositional paraphrases previously proposed by Lauer [Designing statistical language learners: experiments on noun compounds, Ph.D. Thesis, Macquarie University, Australia] and a new set of 35 semantic relations introduced by us. We show the distribution of these semantic categories on a corpus of noun compounds and present several models for the bracketing and the semantic classification of noun compounds. The results are compared against state-of-the-art models reported in the literature.     

Production issues for high aspect ratio Lobster-eye optics using LIGA

 A square packed array of square-channels with long channel axis aligned radially is a useful structure for condensing grazing incidence flux to a focus. These devices, known as Lobster-eye optics for their similarity to the eyes of the macruran crustaceans, show great promise as the focusing optic in the next generation of X-ray all-sky monitors. At X-ray wavelengths the optimal Lobster-eye structure requires an aspect ratio of channel length to width of greater than 30:1. Following recent success in fabricating a low aspect ratio Lobster-eye structure, we discuss some of the parameters for, and production issues involved in making, a useful Lobster-eye prototype using LIGA. We report on our initial attempts to produce high aspect ratio Lobster-eye optics using the LIGA process with a graphite substrate. Received: 10 August 2001/Accepted: 24 September 2001 AGP gratefully acknowledges receipt of an ARC post-doctoral fellowship. This work was supported by the Australian Synchrotron Research Program, which is funded by the Commonwealth of Australia under the Major National Research Facilities Program. Use of the Advanced Photon Source was supported by the U.S. Department of Energy, Basic Energy Sciences, Office of Energy Research, under Contract No. W-31-109-Eng-38. This paper was presented at the Fourth International Workshop on High Aspect Ratio Microstructure Technology HARMST 2001 in June 2001.     

Development of a freestanding copper antiscatter grid using deep X-ray lithography

A prototype freestanding copper antiscatter grid with parallel lamellar walls has been fabricated using deep X-ray lithography and electroforming. The freestanding copper grid has square shaped lamellar walls that are 25 m thick and 1 mm tall with a 550 m period. For mammography applications, the lamellar walls have to be aligned to a point X-ray source of the X-ray system. To achieve this goal, we investigated a dynamic double-exposure technique. Our progress in using stacked exposures and use of the photoresist SU-8, both to reduce fabrication cost, is also presented.We would like to thank Francesco De Carlo, Judith Yaeger, Joseph Arko and Shenglan Xu for their assistance. Use of the APS was supported by US Department of Energy, Office of Sciences, under Contract No. W-31-109-ENG-38. We thank SRI CAT for the support of this research. The work is supported by NIH SBIR Phase II Grants: 2 R44 CA76752-02 and 5 R44 CA76752-03.This paper was presented at the Fourth International Workshop on High Aspect Ratio Microstructure Technology HARMST 2001 in June 2001.     

Effect of suspension characteristics on the performance of thermal barrier coatings deposited by suspension plasma spray

This paper investigates the influence of suspension characteristics on microstructure and performance of suspensions plasma sprayed (SPS) thermal barrier coatings (TBCs). Five suspensions were produced using various suspension characteristics, namely, type of solvent and solid load content, and the resultant suspensions were utilized to deposit five different TBCs under identical processing conditions. The produced TBCs were evaluated for their performance i.e. thermal conductivity, thermal cyclic fatigue (TCF) and thermal shock (TS) lifetime. This experimental study revealed that the differences in the microstructure of SPS TBCs produced using varied suspensions resulted in a wide-ranging overall TBC performance. All TBCs exhibited thermal conductivity lower than 1 W/(m. K) except water-ethanol mixed suspension produced TBC. The TS lifetime was also affected to a large extent where 10 wt % solid loaded ethanol and 25 wt % solid loaded water suspensions produced TBCs exhibited the highest and the lowest lifetime, respectively. On the contrary, TCF lifetime was not as significantly affected as thermal conductivity and TS lifetime, and all ethanol suspensions showed marginally better TCF lifetime than water and ethanol-water mixed suspensions deposited TBCs.