Characterization of minocycline loaded chitosan/polyethylene glycol/glycerol blend films as antibacterial wound dressings

Wound care has been a challenging subject for medical teams and researchers. Bacterial infections are one of the most serious complications in injured skins that often affect healing process. Antibacterial wound dressings can be used to facilitate wound healing process. The purpose of this study is to fabricate chitosan (Chito)/polyethylene glycol (PEG) antibacterial wound dressing doped with minocycline, and to evaluate the influence of composition ratio on the blending properties of the films. To improve the mechanical properties of these films, we examined various amounts of glycerol as a plasticizer. Moreover, we investigated morphological and mechanical aspects, water uptake, degradation, water vapor transmission and wettability properties of the films prepared with various ratios of Chito/PEG/Gly. Assessment of mechanical properties revealed that film containing 80:20 ratio Chito/PEG with 40 PHR Gly content exhibits the highest ultimate tensile strength and elongation at break (9.74 MPa and 45.73% respectively). Furthermore, results demonstrated that upon increasing PEG and Gly contents, degradability and hydrophilicity of the films increased whereas water uptake decreased. Water vapor transmission rate of the films was close to the range of 530–1200 g/m²d, indicating that the as formed films are possible candidates for dressing low exudate wounds or burns. Minocycline loaded films exhibited a biphasic drug release profile and it was more effective on gram-positive bacteria than on gram-negative bacteria. The polymeric film with the highest amount of loaded drug (2%) exhibited insignificant cytotoxicity (88%) against normal fibroblast cell line.     

Robust design optimization of electro-thermal microactuator using probabilistic methods

Micromachining of microelectromechanical systems which is similar to other fabrication processes has inherent variation that leads to uncertain dimensional and material properties. Methods for optimization under uncertainty analysis can be used to reduce microdevice sensitivity to these uncertainties in order to create a more robust design, thereby increasing reliability and yield. In this paper, approaches for uncertainty and sensitivity analysis, and robust optimization of an electro-thermal microactuator are applied to take into account the influence of dimensional and material property uncertainties on microactuator tip deflection. These uncertainties include variation of thickness, length and width of cold and hot arms, gap, Young modulus and thermal expansion coefficient. A simple and efficient uncertainty analysis method is performed by creating second-order metamodel through Box-Behnken design and Monte Carlo simulation. Also, the influence of uncertainties has been examined using direct Monte Carlo Simulation method. The results show that the standard deviations of tip deflection generated by these uncertainty analysis methods are very close to each other. Simulation results of tip deflection have been validated by a comparison with experimental results in literature. The analysis is performed at multiple input voltages to estimate uncertainty bands around the deflection curve. Experimental data fall within 95 % confidence boundary obtained by simulation results. Also, the sensitivity analysis results demonstrate that microactuator performance has been affected more by thermal expansion coefficient and microactuator gap uncertainties. Finally, approaches for robust optimization to achieve the optimal designs for microactuator are used. The proposed robust microactuators are less sensitive to uncertainties. For this goal, two methods including Genetic Algorithm and Non-dominated Sorting Genetic Algorithm are employed to find the robust designs for microactuator.     

Physical and Morphological Properties of Combined Treated Wood Polymer Composites by Maleic Anhydride and Methyl Methacrylate

Wood polymer composites were prepared by consecutive impregnation with maleic anhydride (MAN) and methyl methacrylate (MMA). Samples impregnated with MAN alone, were heated at 120°C and 150°C for 4 and 8 h. Based on the Fourier transform infrared (FT-IR) analysis and soaking-drying test results, treatment with MAN at 150°C for 4 h resulted in formation of stable crosslinks. In the second stage, MMA was used for in situ polymerization within MAN-treated wood. Field emission scanning electron microscopy observation and FT-IR analysis indicated that MMA copolymerized with MAN, and the resultant polymer filled up the lumen and is also grafted on to the cell wall. Improvement of water repellency and dimensional stability were observed in the treated samples, particularly in combined treated samples. The MAN/MMA treatment improved interaction between polymer and wood.     

The Effect of Ti on Mechanical Properties of Extruded In-Situ Al-15 pct Mg2Si Composite

This work was carried out to investigate the effect of different Ti concentrations as a modifying agent on the microstructure and tensile properties of an in-situ Al-15 pctMg₂Si composite. Cast, modified, and homogenized small ingots were extruded at 753 K (480 °C) at the extrusion ratio of 18:1 and ram speed of 1 mm/s. Various techniques including metallography, tensile testing, and scanning electron microscopy were used to characterize the mechanical behavior, microstructural observations, and fracture mechanisms of this composite. The results showed that 0.5 pctTi addition and homogenizing treatment were highly effective in modifying Mg₂Si particles. The results also exhibited that the addition of Ti up to 0.5 pct increases both ultimate tensile strength (UTS) and tensile elongation values. The highest UTS and elongation values were found to be 245 MPa and 9.5 pct for homogenized and extruded Al-15 pctMg₂Si-0.5 pctTi composite, respectively. Fracture surface examinations revealed a transition from brittle fracture mode in the as-cast composite to ductile fracture in homogenized and extruded specimens. This can be attributed to the changes in size and morphology of Mg₂Si intermetallic and porosity content.     

Reversible Control of Gelatin Hydrogel Stiffness by Using DNA Crosslinkers**

Biomaterials with dynamically tunable properties are critical for a range of applications in regenerative medicine and basic biology. In this work, we show the reversible control of gelatin methacrylate (GelMA) hydrogel stiffness through the use of DNA crosslinkers. We replaced some of the inter-GelMA crosslinks with double-stranded DNA, allowing for their removal through toehold-mediated strand displacement. The crosslinks could be restored by adding fresh dsDNA with complementary handles to those on the hydrogel. The elastic modulus (G’) of the hydrogels could be tuned between 500 and 1000 Pa, reversibly, over two cycles without degradation of performance. By functionalizing the gels with a second DNA strand, it was possible to control the crosslink density and a model ligand in an orthogonal fashion with two different displacement strands. Our results demonstrate the potential for DNA to reversibly control both stiffness and ligand presentation in a protein-based hydrogel, and will be useful for teasing apart the spatiotemporal behavior of encapsulated cells.     

Low Temperature Hall Effect Investigation of Conducting Polymer-Carbon Nanotubes Composite Network

Polypyrrole (PPy) and polypyrrole-carboxylic functionalized multi wall carbon nanotube composites (PPy/f-MWCNT) were synthesized by in situ chemical oxidative polymerization of pyrrole on the carbon nanotubes (CNTs). The structure of the resulting complex nanotubes was characterized by transmission electron microscopy (TEM) and X-ray diffraction (XRD). The effects of f-MWCNT concentration on the electrical properties of the resulting composites were studied at temperatures between 100 K and 300 K. The Hall mobility and Hall coefficient of PPy and PPy/f-MWCNT composite samples with different concentrations of f-MWCNT were measured using the van der Pauw technique. The mobility decreased slightly with increasing temperature, while the conductivity was dominated by the gradually increasing carrier density.     

Feldspar/titanium dioxide/chitosan as a biophotocatalyst hybrid for the removal of organic dyes from aquatic phases

Feldspar/titanium dioxide/chitosan hybrid, a photoactive biocompatible adsorbent for anionic dyes, was synthesized, characterized, and successfully tested. The adsorbent characterization, pH role, adsorbent dose effect, equilibrium data, kinetic plats, and thermodynamic parameters are reported. The point of zero charge for the hybrid was measured to be 8.3, and the most favorable pH range for the adsorption process was found to be below this pH value. The adsorption equilibrium study demonstrated that the Freundlich model was best fitted to the experimental data. Without UV light exposure, the prepared adsorbent adsorbed 72 mg of Acid Black 1 (AB1)/g of sorbent (86% removal) from a 100‐mL solution with an initial dye concentration of 50 mg/L, whereas UV irradiation resulted in an increase in the elimination of AB1 dye (97% removal). The kinetic data was depicted well by the pseudo‐second‐order model. The thermodynamic parameters indicated that the reaction between the hybrid and the dye was exothermic and also spontaneous at lower temperatures. In the batch desorption process, several aqueous solutions adjusted to different pH values were tested, and the best desorption performance (90% desorption) was achieved at pH 11. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40247.     

Study of the anticorrosive properties of polypyrrole/polyaniline bilayer via electrochemical techniques

In this work, using electrochemical techniques the authors investigated the protective properties of a polypyrrole/polyaniline bilayer as a conductive polymer. A polypyrrole/polyaniline bilayer was deposited on carbon steel substrate by potentiostatic method. The electric capacitance and resistance of the films were monitored with the immersion time in a corrosive solution to investigate the water permeability of the films. Polypyrrole/polyaniline bilayer has a relatively low permeability and good catalytic behavior in passivation of carbon steel in longer periods. The results show that the bilayer has a better anticorrosive behavior compared to homopolymers (polypyrrole and polyaniline).