Effects of cononsolvency on gelation of poly(vinyl alcohol) in mixed solvents of dimethyl sulfoxide and water

We studied the rates of gelation and phase separation of poly(vinyl alcohol) (PVA) solutions in mixtures of dimethyl sulfoxide (DMSO) and water at 25 °C and found that both the rates show a maximum at a volume fraction of DMSO φ_DMSO=0.60 while gelation was not observed either in pure DMSO or pure water, suggesting that water-DMSO is a cononsolvent system for PVA. On the basis of the data by Cowie [Can J Chem 36 (1961) 2240] we concluded that the 1:2 stable complex between one DMSO molecule and two water molecules is the main cause of this cononsolvency.     

Measurement of losses and saturated permeability of saturable coresunder submicrosecond saturation

Two specific methods are introduced for obtaining accurate losses and saturated permeability of saturable cores under submicrosecond saturation. One employs an additional inductor for accurate measurement of the losses. The other minimizes stray inductance for accurate measurement of the saturated permeability. The measured relative permeability of Co-based amorphous cores rapidly drops to nearly 1.0. On the other hand, ferrite cores need a much larger magnetic field than that for Co-based amorphous cores in order to obtain the relative permeability of 1.0     

Measurement of self-diffusion coefficients in Li ionic conductors by using the short-lived radiotracer of 8Li

For the effective use of short-lived radioactive beams, soon to be available at the Tokai Radioactive Ion Accelerator Complex, the authors have developed a radiotracer method for diffusion studies in solids. The experimental test was performed by the measurement of the diffusion coefficients of Li in a sample of the compound βLiAl using an α-emitting radiotracer of ⁸Li (T_1/2=0.84 s). It was found that the time-dependent yields of the α particles from the diffusing ⁸Li that was initially implanted in the sample could be used as a measure of the diffusivity of the tracer in a nondestructive way. The method was applied to measure the self-diffusion coefficients of Li in βLiGa, and for investigating how the Li diffusion in the Li ionic conductors is affected by the concentration of atomic defects (i.e., the existence of the atomic vacancies of Li and the defects in Ga sites that are replaced by Li).     

Real-time optical image subtraction and edge enhancement using ferroelectric liquid-crystal devices based on speckle modulation

We carried out real-time optical image subtraction and edge enhancement based on a speckle modulation technique by using ferroelectric liquid-crystal polarization switches and a ferroelectric liquid-crystal spatial light modulator. A ferroelectric liquid-crystal spatial light modulator is employed as a real-time and multiple-exposure optical device, and successful results are obtained from three-exposure images modulated by speckles. Thus, image subtraction and edge enhancement are realized in real time. The whole operation is performed within several milliseconds with modest operating conditions. Because the spatial light modulator has a high resolution of greater than 100 line pairs/mm and can store fine speckle patterns, the image qualities we obtained are quite satisfactory.     

Design of moving magnet type pickup actuator using inserted coil

Recently, the demand of the information storage devices with large storage capacity such as Blu-ray Disc and high-definition television is increased. In keeping with this trend, the optical storage devices are also required to have high data transfer rate and large storage capacity. To satisfy these requirements, the actuator for optical disc drive should have a high servo bandwidth to compensate the vibration of optical disc. The servo bandwidth is limited by some flexible modes of the actuator, thus it is essential to make these frequencies of flexible modes to high frequency region. The frequency of flexible mode depends on materials and shape. Stiff materials and simple shape is useful to increase the frequency of flexible mode. In this paper, we suggested a moving magnet type actuator having flexible modes which are happened at high frequency region. Generally, the moving magnet type actuator has an advantage to increase the frequency of flexible mode because the moving magnet type actuator has simple structure and the Young’s modulus of magnet is high. However, large moving mass and inefficiency of Electromagnetic (EM) circuit cut down driving sensitivities of actuator. To improve driving sensitivities, we designed the model with the closed EM circuit for tracking actuation. The design of experiments (DOE) procedure is applied to get proper design parameters and the variable metric method (VMM) which is a technique of optimization is used to improve driving sensitivity. The lens holder is also improved based on the optimization result of EM circuit. And to make up for the low efficiency of EM circuit, the thermal stability is checked on condition that the input current is very high. At last, the final design of moving magnet type actuator is suggested and it is verified that the driving performance and the structural stiffness of the final design is sufficient.     

Logic circuit synthesis using Prolog

This paper briefly reviews the current use of CAD in logic design, and then describes an expert system used to synthesize logic circuits. Specialized knowledge dealing with standard TTL ICs is written in Prolog and AGE, and the results are compared.     

Decoupling properties of singular LQ regulation problem

Some properties of a limiting solution derived from a standard LQ regulator problem are discussed in the case where the input weighting matrix tends to zero, for a discrete time system. The explicit limiting solution is given in some literature. It is shown that the limiting solution is closely connected with a disturbance decoupling problem. Moreover it is pointed out that the limiting feedback gain with the help of feedforward gain constructs the decoupled system with the maximum number of blocks.