Preparation of Mn2+-Cu+ co-doped P2O5–ZnO–Al2O3 glasses and their red fluorescence properties

To make a Mn²⁺-doped red glass phosphor that can be excited with ultraviolet (UV) light of light-emitting diodes (LEDs), 60P₂O₅-35ZnO-5Al₂O₃-8MnO-xCu₂O glasses (x = 0-1.00) were prepared by a melt-quenching method at 1200-1400°C for 30-180 minutes in atmospheric air, and the redox of Mn and Cu as well as fluorescence properties were investigated. The Mn²⁺ ion was not reduced and oxidized in the melting, quenching, and annealing processes. The valence of Cu in the glasses changed in the order of 0, 1+, and 2+ with the increase in the amount of Cu₂O and in the melting temperature and time. In this study, a 60P₂O₅-35ZnO-5Al₂O₃-8MnO-0.10Cu₂O glass melted at 1250°C for 90 minutes, having the highest Cu⁺ concentration, showed the strongest Mn²⁺ red fluorescence under the UV light at 275 nm. This strong Mn²⁺ red fluorescence has been caused by the energy transfer from excited Cu⁺ ions to Mn²⁺ ions.     

Unperturbed dimension of poly(4-acetoxystyrene) measured in good and theta solvents

In order to obtain the additional data concerning the unperturbed dimension of poly-4-substituted styrene, light scattering measurements are performed on the twenty-two fractions with molecular weight of (0.91–352)·10⁴ of poly(4-acetoxystyrene) in dioxan at 25°C, from which the molecular weight obtained was found easily to be evaluated with the gel permeation chromatography using THF. Phase separation experiments for this polymer indicate that the theta state is attained in isopropyl acetate at 19.7°C and butyl acetate at 26.8°C. By making viscosity measurements at that state, the value of K_Θ is directly evaluated as 5.4·10^?4 dl g^?1. The limiting viscosity number is also obtained in good solvents, THF and dioxan, at 25°C and constants of the Mark-Houwink-Sakurada equation in each solvent are determined. Further, approximately the same K_Θ as above is obtained from these data with the Stockmayer-Fixman plot. The calculated value of steric factor, 2.37, on this polymer may be plausible, compared with those of polyvinylaromatic derivatives.     

10-Gb/s error-free transmission under optical reflection using isolator-free 1.3- /spl mu/m InP-based vertical-cavity surface-emitting lasers

Error-free transmission through 10-km single-mode fiber at 10 Gb/s under -13-dB optical reflections has been demonstrated for the first time using a directly modulated 1.3-/spl mu/m InP-based VCSEL without any optical isolator. The 13-GHz relaxation oscillation frequency and stable polarization suppresses relative intensity noise degradation under optical reflection. Only 1-dB error-free power penalty has been observed with optical reflection set with the worst polarization direction.     

Mechanical properties of sinter-forged Al2O3-ZrO2 ceramics

Two kinds of composites, Al₂O₃-25 wt% ZrO₂(2 mol% Y₂O₃) (Y-ZTA), Al₂O₃-25 wt% ZrO₂(8 mol% CeO₂) (Ce-ZTA) were produced by the sinter-forging process. The effect of presintering temperature on the mechanical properties of the composites was examined. The sinter-forging process increased the room-temperature bending strength in comparison with pressureless sintering, owing to the smaller grain size in sinter-forged bodies than in pressureless sintered ones. It was found necessary to keep the presintering temperature considerably lower than sinter-forging temperature in order to improve the room-temperature strength. The strength of sinter-forged Ce-ZTA was higher than that of sinter-forged Y-ZTA. The residual surface compressive stress induced by the phase transition during grinding in Ce-ZTA was found to be effective to further improve the strength and fracture toughness.     

Analysis of the IgE-epitope of Der f 2, a major mite allergen, by in vitro mutagenesis

Der f 2 is a major mite allergen composed of 129 amino acid residues. To determine the major epitopes on Der f 2 recognized by human IgE antibodies, artificial mutations were introduced to Der f 2 protein. The IgE-binding activity of Der f 2 was significantly decreased by deletion of 10 amino acids at the N-terminus or nine amino acids at the C-terminus. Site-directed mutagenesis with a single amino acid replacement by Ala or Leu in both N- and C-terminal regions as well as a central portion was performed to generate 42 single-site mutations. Amino acid replacement around a disulfide bond of Cys8-Cys119 caused a marked decrease in IgE-binding activity. Furthermore, a distinct decrease in IgE-binding was also caused by Ala-substitution close to a disulfide bond of Cys73-Cys78 and by mutations of a few charged residues. From these results, it was concluded that the two disulfide-forming regions of Der f 2 and several charged residues are important for forming major epitope structures recognized by human IgE antibodies.     

Analytical studies of four-inch pipe whip tests under BWR LOCA conditions

The purpose of pipe rupture studies in JAERI is to perform model tests on pipe whip, restraint behavior, jet impingement and jet thrust force, and to establish a computational method for analyzing these phenomena. This report presents the analytical results of 4-inch pipe whip tests under BWR LOCA conditions.Dynamic response analyses were performed using the general-purpose finite element program ADINA. The test pipe was modelled by straight beam elements and the four restraints were modelled by a single truss element. The analytical results were compared with the experimental results. Impact time and maximum total restraint force showed good agreement with experimental results. On the other hand, pipe strain and pipe deflection could not be predicted so well. The reason for this is that the sliding of the restraint during the pipe whip movement cannot be considered in the analyses.     

A reconfigurable VLSI-based double-lens tracking camera

Watching and tracking an object while seeing a much wider view is one of advantages of the eye system. We proposed and developed a tracking camera system that mimics the eyes by using double-lens modules. In the system, a wide view is captured through the wide-lens module, while the target in it is tracked and magnified through the telescopic lens module. Electronic circuits for tracking control are implemented onto the reconfigurable VLSI or FPGA in order to embed the parallelism in the tracking algorithm into the hardware. A successfully developed FPGA-based prototype performs high-speed tracking at the video-rate. This work was present in part at the 12th International Symposium on Artificial Life and Robotics, Oita, Japan, January 25–27, 2007     

Thermal expansion behavior of various aromatic polyimides

The thermal expansion behavior for various aromatic polymides was investigated. Usally polymers, including polyimides, have high thermal expansion coefficients (3–6 × 10^?5 K^?1), compared with metals and ceramics. However, there are some polyimides which have very low thermal expansion coefficients below 1 × 10^?5 K^?1. This property was observed for the polymides obtained from pyromellitic dianhydride or 3,3′ 4,4′-biphenyltetracarboxylic dianhydride and aromatic diamines which were constituted of only benzene rings fused at para positions. It was proposed that their low thermal expansion coefficient related to the linearity in their polymer molecular skeltons.     

A comparison of the grade of laryngeal visualisation;--the McCoy compared with the Macintosh and the Miller blade in adults

Effectiveness in visualization of the vocal cord during orotracheal intubation with McCoy (McC) compared with Macintosh (Min) and Miller (Mil) blades were investigated. After an institutional review board approval, 117 patients for elective surgery under general anesthesia requiring tracheal intubation were investigated. Five board certified anesthesiologists tried to visualize the vocal cord of a patient three times with the three different types of laryngoscope. Total of 351 intubation attempts were studied. The view obtained at laryngoscopy with each of the three blades was recorded as follows. Grade 1. If most of the glottis is visible. Grade 2. If only the posterior extremity of the glottis is visible. Grade 3. If no part of the glottis can be seen. Grade 4. If not even the epiglottis can be exposed. Eight-two Grade 1 views were obtained with McC, 72 with Mil and 47 with Min, respectively. Thirty-three Grade 2 views were obtained with McC, 36 with Min and 24 with Mil. Two Grade 3 views with McC, 34 with Min and 14 with Mil were obtained. Seven Grade 4 views were obtained with Mil. The grades of laryngeal visualization with McC were significantly lower than those with Min and Mil.