Scanning electron microscopy of the myosin-coated surface of polystyrene beads in a force-movement assay system for ATP-dependent actin-myosin sliding

An outbreak of Cryptosporidiosis occurred over three months in a British Columbia community, peaking in December 1990. Results of the case-control study and illness surveys support the hypothesis that transmission occurred in a public children's pool at the local recreation centre. Analysis using lab-confirmed cases revealed a matched odds ratio of 4.5 [95% CI 0.97, 20.83], and using clinical cases an unmatched odds ratio of 12.8 [95% CI 3.68, 46.77], associated with swimming in the children's pool within two weeks prior to onset of illness. Other risk factors were not significant. Attack rates in various groups of children's pool users ranged from 8% to 78%. The children's pool was closed for steam cleaning and disinfection. Unusually frequent defecations including liquid stools had occurred before and during the outbreak. Improvements were instituted for removal of feces and superchlorination of pool water.     

Optimization of facial skin temperature-based anomaly detection model considering diurnal variation

Artificial Life and Robotics - The amount of blood under the surface of skin is controlled by the autonomic nervous system and directly influences the facial skin temperature. Classification models...     

Magnetization Reversal by Electrical Spin Injection in Ferromagnetic (Ga,Mn)As-Based Magnetic Tunnel Junctions

We report current-induced magnetization reversal in a ferromagnetic semiconductor-based magnetic tunnel junction (Ga,Mn)As/AlAs/(Ga,Mn)As prepared by molecular beam epitaxy on a p-GaAs(001) substrate. A change in magneto-resistance that is asymmetric with respect to the current direction is found with the excitation current of 10⁶ A/cm². Contributions of both unpolarized and spin-polarized components are examined, and we conclude that the partial magnetization reversal occurs in the (Ga,Mn)As layer having smaller magnetization with the spin-polarized tunneling current of 10⁵ A/cm².     

Study of all-optical clock recovery performance by the primary and the secondary temporal Talbot effects in a second-order dispersive medium

We theoretically and experimentally study the all-optical clock recovery performance using the primary or the secondary temporal Talbot effects (PTTE or STTE, respectively) in a dispersive medium having the first-order dispersion together with the second-order dispersion (e.g., conventional single-mode fibers: SMFs). Our preliminary numerical simulations have indicated that the STTE-based all-optical clock recovery technique can improve double its performance as compared with the conventional PTTE-based technique when the second-order dispersion (dispersion slope) can be neglected. The following simulation results have revealed that the second-order dispersion, that the normal SMFs possess, limits the performance improvements in the STTE-based clock recovery, whereas the limited performance can be improved by appropriately compensating for the second-order dispersion. On the basis of our simulation results, experiments of the STTE-based clock recovery were conducted by compensating for the second-order dispersion of SMFs used as dispersive media. To be specific, SMFs’ second-order dispersion has been reduced to the one-sixteenth of its original value by combining with the reverse-dispersion fibers (RDFs) which can provide the second-order dispersion of the opposite sign to the SMFs. As a result, the performance improvements in the STTE-based clock recovery was demonstrated so that the 10-GHz clear optical clock pulses were successfully recovered from 10-Gbit/s return-to-zero (RZ) pseudo-random bit sequence (PRBS) optical signals.     

Temporal-Talbot-effect-based preprocessing for pattern-effect reduction in all-optical clock recovery using a semiconductor-optical-amplifier-based fiber ring laser

We propose and experimentally demonstrate the temporal-Talbot-effect (TTE)-based preprocessing for the pattern-effect reduction in the all-optical clock recovery using a semiconductor-optical-amplifier (SOA)-based fiber ring laser (SOA-FRL). The TTE-based preprocessing successfully reduced the pattern effects of the recovered clock pulses, so that the 10-GHz clear optical clock pulses were recovered from a 10-Gbit/s return-to-zero on–off keying (RZ-OOK) pseudo-random bit sequence (PRBS) optical signal. “Peak variation” and “Pattern-dependent intensity noise (PDIN)” were proposed and were utilized as parameters to quantitatively evaluate the pattern effects, from which recovered clock pulses suffer, in the temporal domain and the frequency domain, respectively. Peak variation was reduced from 77.2% to 36.2%, and PDIN was improved from ?103 dBc/Hz to ?110 dBc/Hz with the aid of the TTE-based preprocessing. Furthermore, we examined the tolerance of the proposed technique by intentionally deviating the input signal’s bit-rate by ±190 Mbit/s (±2% of the bit-rate) from the optimum condition for the TTE. As compared with the PDIN value for the pulse train obtained by the direct injection of the non-processed signal into the SOA-FRL, the PDIN of the recovered clock pulses using the preprocessed signal indicated improvements over the entire measurement range of ±190 Mbit/s, which corresponds to the wavelength-dispersion deviation of ±56 ps/nm (±4% of the wavelength-dispersion applied to the input signal) from the optimum value.     

Abdominal incisional hernia occurring after an esophagectomy reconstructed with a gastric tube through an antesternal route: report of a case

A Japanese man, who had undergone a subtotal esophagectomy reconstructed with a gastric tube through an antesternal route for esophageal carcinoma 16 years previously, was admitted to our hospital because of an abdominal incisional hernia. The abdominal incisional hernia was in his upper abdomen and was difficult to push back into the intraabdominal cavity by hand. The hernia was successfully repaired by operation. We thus conclude that an abdominal incisional hernia is a rare but important late-phase complication occurring after an esophagectomy reconstructed with either an antesternal or retrosternal route, and an operation should be the treatment of choice.     

Differences in thermal salivation between the FOK rat (a model of genotypic heat adaptation) and three other rat strains

Rats secrete saliva in response to heat. In the present study, details of thermal salivation were investigated using the FOK rat in comparison with Sprague-Dawley (SD), Donryu, and ACI rats. The FOK rat is a strain inbred for genotypic heat adaptation and endures heat for long periods. Conscious rats of all four strains were exposed to 42.5 degrees C. The order of heat endurance times at this temperature was FOK > SD > Donryu = ACI. FOK rats spread their saliva over their entire ventral surface, their faces, and their outside legs. This saliva area was wider than those made by the other three strains. SD rats spread in an area wider than those of the Donryu and ACI rats. Saliva spreading in the FOK rats continued for 4.0-4.5 h, far longer than in the other strains. Under ketamine anesthesia and exposure to 40 degrees C, the FOK rats secreted saliva at 1390+/-235 microL/100 g of body weight during a 60-min observation period. This was the highest rate among the four rat strains (p < 0.0001). The body temperature increase rate in anesthetized FOK and SD rats was lower than in the other two strains, suggesting a minor contribution of unknown factors. Ligation of the submandibular gland ducts abolished the thermal salivation of the FOK rats, whereas ligation of the parotid duct had no effect. The submandibular, sublingual, and lachrymal glands in the FOK rats were 1.3-1.5, 1.25-1.4, and 1.3-1.5 times heavier, respectively, than those in the other three strains, whereas the parotid gland of the FOK rats was not enlarged. These findings indicate that the rats' saliva spreading and ET values are significantly correlated. A potentiated and long-lasting salivation from the submandibular gland was acquired during development of genotypic heat adaptation. This salivation is actuated in response to heat. The pronounced thermal salivation is probably attributable to adaptive changes in the superior salivatory nucleus-chorda tympani-submandibular gland pathway.     

Utilization of Myosin and Actin Bundles for the Transport of Molecular Cargo

The utilization of motor proteins for the movement and assembly of synthetic components is currently a goal of nanoengineering research. Application of the myosin actin motor system for nanotechnological uses has been hampered due to the low flexural rigidity of individual F‐actin filaments. Here it is demonstrated how actin bundling can be used to affect the translational behavior of myosin‐propelled filaments, transport molecules across a motor‐patterned surface, and that the movement of bundled actin can be regulated photonically. These data suggest that actin bundling may significantly improve the applicability of the myosin motor for future nanotechnological applications.