Experimental and numerical analysis of the influence of cable tray arrangements on the resulting mass loss rate and fire spreading

In the context of industrial buildings and power plants, electrical installations and cable trays represent a main fuel load and a potential initial fire source due to possible short circuits or comparable malfunction. Furthermore, a fire can spread from one tray to additional trays mounted above and/or horizontally on one tray. Because of the high significance of cable fires, several research projects have been carried out, investigating the fire behaviour of cables from small‐scale tests, eg, the cone calorimeter, up to large‐scale tests, analysing complete cable tray constructions. The goal of the work presented in this paper is the extension of the knowledge regarding the influence of geometrical parameters like the packing density and tray distance on the burning behaviour and fire spread of cable tray installations. The results are considered, together with test results from the literature, to quantify the main physical parameters describing the burning behaviour. In a next step, the general applicability of these parameters as input data for the parametrization of the source term of numerical simulations is shown. The test results show that the burning behaviour and the fire spreading highly depend on the cable arrangement of the cables on the cable tray, in combination with other boundary conditions. By applying the results as input for a fire simulation, the mass loss rate is considered appropriately.     

Development of a Continuous Segmented Flow Tubular Reactor and the “Scale‐out” Concept – In Search of Perfect Powders

The synthesis of powders with controlled shape and narrow particle size distributions is still a major challenge for many industries. A continuous Segmented Flow Tubular Reactor (SFTR) has been developed to overcome homogeneity and scale‐up problems encountered when using batch reactors. Supersaturation is created by mixing the co‐reactants in a micromixer inducing precipitation; the suspension is then segmented into identical micro‐volumes by a non‐miscible fluid and sent through a tube. These micro‐volumes are more homogeneous when compared to large batch reactors leading to narrower size distributions, better particle morphology, polymorph selectivity and stoichiometry. All these features have been demonstrated on single tube SFTR for different chemical systems. To increase productivity for commercial application the SFTR is being “scaled‐out” by multiplying the number of tubes running in parallel instead of scaling‐up by increasing their size. The versatility of the multi‐tube unit will allow changes in type of precipitate with a minimum of new investment as new chemistry can be researched, developed and optimised in a single tube SFTR and then transferred to the multi‐tube unit for powder production.     

Eine allgemeine Berechnungsmethode für Wärmeübertragerschaltungen

A general method for calculating any heat exchanger network is presented. As heat exchanger networks can be considered as coupled heat exchangers, that are supplied in a predetermined order, it is convenient to consider even a single heat exchanger with complicated flow patterns as a network composed of several ideally-supplied, coupled devices. The advantage of this method lies in its higher accuracy and the use of a simpler calculation formula for an ideal device model. These advantages far outweigh the disadvantages of the arduous iterative type of calculation used to establish the temperature between ideal devices. The presented method allows, for the first time, without using the iterative method, a calculation of heat exchanger networks based upon the principle of coupled matrix equations. These equations are for any given heat exchanger network simply allocated parameters, and therefore this method is especially suited for the calculation of any network modification. For the application of this method is no special software necessary. The solution of the model equations is obtained very easy and clear with mathematical standard software, e.g. Mathcad or Maple.     

Peak-to-average power reduction in space division multiplexing based OFDM systems through spatial shifting

A new method to reduce the peak-to-average power ratio (PAPR) in space division multiplexing systems applying orthogonal frequency division multiplexing is proposed. The method applies spatial shifting to partial transmit sequences to achieve a decreased PAPR on all transmit branches.     

Severe pulmonary hypertension reversed by antibiotics in a patient with Whipple's disease

The case is described of a 58 year old man with systemic Whipple's disease with pericardial and pleural effusions and severe pulmonary hypertension. After three months of antibiotic treatment there was a complete resolution, not only of the symptoms known to be associated with Whipple's disease (diarrhoea, arthralgia, pericardial and pleural effusions), but also of pulmonary hypertension.     

Combination of coating and heat treatment processes

For a proper use of coated tools and components excellent coating properties as well as excellent substrate properties of the coating/substrate composite are necessary. A well known example is the load support of hard steel substrates for thin wear resistant coatings. Therefore coating processes must be combined with heat treatment processes of the substrates, whereby several practical processing constraints like order and compatibility of the applied treatment procedures must be considered. The combination of CVD-coating plus laser beam hardening is an example of a post coating heat treatment. Applications may be possible for large forming tools made of high alloyed tool steels, which nowadays are usually through hardened after CVD-coating. Laser beam hardening offers the possibility, to harden only the highly loaded edges of the tools. The advantages of this combination are short process time, less distortion and compressive residual stresses in the substrate surface. CVD-coatings can endure laser beam hardening with suitable parameters. The influence of CVD TiN-coated steel substrates and laser beam hardening parameters on microstructures and properties of coating/substrate compounds have been investigated. Special attention was paid to overlapping hardening zones, which may occur at the start and end points of a laser hardened track. In summary, the combination of coating and heat treatment processes show a high potential to produce coating/substrate compounds with excellent coating properties as well as excellent substrate properties.     

In-Situ and Real-Time Investigation of Columnar-to-Equiaxed Transition in Metallic Alloy

In this article, we present a review of observations during Al-3.5 wt pct Ni alloy solidi.cation experiments performed at the European Synchrotron Radiation Facility (ESRF) in Grenoble. These experiments provide direct access to dynamical phenomena during columnar growth (initial transient and breakdown of a planar solid-liquid interface), and for the first time to the transition from columnar-to-equiaxed microstructure (nucleation ahead of a columnar front and blocking of a columnar front by an equiaxed microstructure) and fully equiaxed growth (propagation of an effective front). Based on these experimental observations, critical parameters such as columnar growth velocity variation during the transition or equiaxed-grain diameter are measured and discussed. This article is based on a presentation made in the symposium entitled “Solidi.cation Modeling and Microstructure Formation: In Honor of Prof. John Hunt,” which occurred March 13–15, 2006, during the TMS Spring Meeting in San Antonio, Texas, under the auspices of the TMS Materials Processing and Manufacturing Division, Solidification Committee.     

阿维斯塔波莱瑞特厂炉卷轧机新技术

阿维斯塔波莱瑞特厂正在进行一个现代化改造项目，以提高炉卷轧机的生产能力，达到年产100万吨。但是，由于在阿维斯塔波莱瑞特厂炉卷轧机上的现有技术已达到极限，只有通过对轧机及自动化系统进行现代化的改造才有可能提高和增强轧机的利用率和易维护性。