An enzymeimmunoassay for total thyroxine using avidin-biotin separation system and thyroxine-peroxidase conjugate

An avidin-biotin enzymeimmunoassay for total thyroxine in serum is described. Avidin was adsorbed to biotinylated bovine serum albumin coated tubes prepared with glutaraldehyde as coupling agent. In the enzymeimmunoassay, affinity purified biotinylated anti-thyroxine IgG, sample or standards, and thyroxine-horseradish peroxidase were simultaneously added to the avidin coated tubes. The bound enzymatic activity was then measured with o-phenylenediamine and H2O2. Results showed that the assay has good precision (within-assay CV% less than 10% and between assay 11.7% in hypo- and 6.9% in hyperthyroid range), good assay range (0-800 nmol/L), good sensitivity (4 nmol/L), and can be performed in 2.5 hours. The results obtained correlate well (r = 0.93) with those of an RIA.     

Equilibrium distributions of key components of spearmint oil in sub/supercritical carbon dioxide

Effects of temperature (at 35, 45 or 55°C) and pressure (10–110 atm) on the relative distribution coefficients of the twelve key components of spearmint oil (essential oil ofMentha cardiaca; Scotch spearmint) at equilibrium in dense CO₂ were investigated under conditions ranging from subcritical to supercritical regions. Effects of vapor pressure, molecular weight and polarity of the key components on their equilibrium distributions in sub/supercritical CO₂ are discussed. At 35°C, all key components of spearmint oil are equally soluble in dense CO₂ within the 12–102 atm pressure region. At 45 and 55°C, the key components are equally soluble for pressures greater than about 60 atm. However, around either 45°C/27 atm or 55°C/35 atm conditions, the relative distribution coefficients of all monoterpene hydrocarbons and of isomenthone (an oxygenated monoterpene) exhibit maxima, which are due to significantly higher vapor pressures of these components and significantly lower solvating power of the dense-gas solvent at these particular temperatures and pressures. Vapor-pressure effects, coupled with the decrease in solvating power, dominate the effects of polarity and molecular mass of the key components. Deterpenation of spearmint oil with dense CO₂ is possible around either 45°C/27 atm or 55°C/35 atm, where the monoterpene hydrocarbons tend to concentrate in the CO₂-rich phase.     

Effect of intracanal medicaments on the push-out bond strength of Biodentine in comparison with Bioaggregate apical plugs

To evaluate the effect of intracanal medicaments on the push-out bond strength of Biodentine in comparison with DiaRoot BioAggregate (BA) when used as apical plugs. Forty single-rooted teeth were prepared using Peeso reamers. The samples were divided into four groups. The intracanal medicaments were applied to the root canals as follows: Group1: a combination of metronidazole–ciprofloxacin–cefaclor, Group2: a combination of metronidazole–ciprofloxacin, Group3: calcium hydroxide, and Group4: no medication. After 21 days, the medicaments were removed. The apical part of each root was horizontally sectioned into 1-mm thick slices. The samples were divided into two subgroups, and the following materials were placed: Biodentine, DiaRoot-BioAggregate. After 48-h incubation, the push-out bond strength was measured. The data were analyzed by a two-way ANOVA. Biodentine showed a significantly higher mean push-out bond strength value than DiaRoot-BioAggregate (P = 0.00). The medications have an effect on the push-out bond strength of both materials (P = 0.002). Biodentine showed better adhesive performance as an apical plug than DiaRoot-BioAggregate.     

Catalytic Sulfation of Betulin with Sulfamic Acid: Experiment and DFT Calculation

Betulin is an important triterpenoid substance isolated from birch bark, which, together with its sulfates, exhibits important bioactive properties. We report on a newly developed method of betulin sulfation with sulfamic acid in pyridine in the presence of an Amberlyst^®15 solid acid catalyst. It has been shown that this catalyst remains stable when being repeatedly (up to four cycles) used and ensures obtaining of sulfated betulin with a sulfur content of ~10%. The introduction of the sulfate group into the betulin molecule has been proven by Fourier-transform infrared, ultraviolet-visible, and nuclear magnetic resonance spectroscopy. The Fourier-transform infrared (FTIR) spectra contain absorption bands at 1249 and 835–841 cm⁻¹; in the UV spectra, the peak intensity decreases; and, in the nuclear magnetic resonance (NMR) spectra, of betulin disulfate, carbons С3 and С28 are completely shifted to the weak-field region (to 88.21 and 67.32 ppm, respectively) with respect to betulin. Using the potentiometric titration method, the product of acidity constants K₁ and K₂ of a solution of the betulin disulfate H⁺ form has been found to be 3.86 × 10^–6 ± 0.004. It has been demonstrated by the thermal analysis that betulin and the betulin disulfate sodium salt are stable at temperatures of up to 240 and 220 °C, respectively. The density functional theory method has been used to obtain data on the most stable conformations, molecular electrostatic potential, frontier molecular orbitals, and mulliken atomic charges of betulin and betulin disulfate and to calculate the spectral characteristics of initial and sulfated betulin, which agree well with the experimental data.     

Kinetic and equilibrium studies in removing lead ions from aqueous solutions by natural sepiolite

The capacity of sepiolite for the removal of lead ions from aqueous solution was investigated under different experimental conditions. The Langmuir and Freundlich equations, which are in common use for describing sorption equilibrium for wastewater-treatment applications, were applied to data. The constants and correlation coefficients of these isotherm models for the present system at different conditions such as pH, temperature and particle size were calculated and compared. The equilibrium process was well described by the Langmuir isotherm model and the maximum sorption capacity was found to be 93.4 mg/g for the optimal experimental condition. The thermodynamic parameters (DeltaG(o), DeltaH(o) and DeltaS(o)) for lead sorption on the sepiolite were also determined from the temperature dependence. The influences of specific parameters such as the agitation speed, particle size and initial concentration for the kinetic studies were also examined. The sorption kinetics were tested for first order reversible, pseudo-first order and pseudo-second order reaction and the rate constants of kinetic models were calculated. The best correlation coefficients were obtained using the pseudo-second order kinetic model, indicating that lead uptake process followed the pseudo-second order rate expression.     

Multi-cue hand detection and tracking for a head-mounted augmented reality system

With the recent developments in wearable augmented reality (AR), the role of natural human–computer interaction is becoming more important. Utilization of auxiliary hardware for interaction introduces extra complexity, weight and cost to wearable AR systems and natural means of interaction such as gestures are therefore more desirable. In this paper, we present a novel multi-cue hand detection and tracking method for head-mounted AR systems which combines depth, color, intensity and curvilinearity. The combination of different cues increases the detection rate, eliminates the background regions and therefore increases the tracking performance under challenging conditions. Detected hand positions and the trajectories are used to perform actions such as click, select, etc. Moreover, the 6 DOF poses of the hands are calculated by approximating the segmented regions with planes in order to render a planar menu (interface) around the hand and use the hand as a planar selection tool. The proposed system is tested on different scenarios (including markers for reference) and the results show that our system can detect and track the hands successfully in challenging conditions such as cluttered and dynamic environments and illumination variance. The proposed hand tracker outperforms other well-known hand trackers under these conditions.     

Reduced myofibroblast differentiation on femtosecond laser treated 316LS stainless steel

In-stent restenosis is a common complication after stent surgery which leads to a dangerous wall narrowing of a blood vessel. Laser assisted patterning is one of the effective methods to modify the stent surface to control cell–surface interactions which play a major role in the restenosis. In this current study, 316LS stainless steel substrates are structured by focusing a femtosecond laser beam down to a spot size of 50 μm. By altering the laser induced spot density three distinct surfaces (low density (LD), medium density (MD) and high density (HD)) were prepared. While such surfaces are composed of primary microstructures, due to fast melting and re-solidification by ultra-short laser pulses, nanofeatures are also observed as secondary structures. Following a detailed surface characterization (chemical and physical properties of the surface), we used a well-established co-culture assay of human microvascular endothelial cells and human fibroblasts to check the cell compatibility of the prepared surfaces. The surfaces were analyzed in terms of cell adherence, proliferation, cell morphology and the differentiation of the fibroblast into the myofibroblast, which is a process indicating a general fibrotic shift within a certain tissue. It is observed that myofibroblast proliferation decreases significantly on laser treated samples in comparison to non-treated ones. On the other hand endothelial cell proliferation is not affected by the surface topography which is composed of micro- and nanostructures. Such surfaces may be used to modify stent surfaces for prevention or at least reduction of restenosis.     

A practical solid sampling method for the determination of lead in chewing gum by electrothermal atomic absorption spectrometry

In this study, the lead concentrations of chewing gum samples having different compositions were determined by solid sampling electrothermal atomic absorption spectrometry. In order to optimise the experimental conditions, the effects of pyrolysis temperature, atomization temperature, sample amount and sample thermal pre-treatment, on the analyte sensitivity were investigated. The samples were ashed at 400 °C for 2 h prior to directly determined by SS-ETAAS applying 600 °C of pyrolysis and 1600 °C of atomization temperatures without to add a modifier, acid and/or surfactant. The relationship between sample mass and integrated absorbance was linear up to 1.2 mg of sample; for higher sample mass the relationship was no longer linear, irrespective of the lead content. In addition, the thermally treated chewing gum samples were digested using concentrated HNO₃. The lead concentrations found by the two methods in 27 different kinds of samples were not significantly different at 95% confidence level. The proposed solid sampling technique was fast, simple, the risks of contamination and analyte loss were low. Detection limit (3σ) for lead was 0.017 ng/g.     

Technical note Development of a new technique for geological investigation using DTM data: An example in western Turkey

The topographic features formed by factors such as altitude, tectonic movement, lithology and others were analysed quantitatively by a new technique in this study on rift valleys in western Turkey. This technique calls for the determination of the altitude and vertical geologic movements in long-wavelength components after the separation of the short- and long-wavelength components of the two-dimensional Fast Fourier Transform (FFT) based on a digital terrain model (DTM). The location of active faults can be inferred from the magnitude of the anomalies of altitudinal dispersion and the position of the anomalies, and it is also inferred that the values of the anomalies are related to the displacement of the faults. The results have been checked in the field and it was shown that this technique is very effective for structural analysis.