Evaluation of direct light processing for the fabrication of bioactive ceramic scaffolds: Effect of pore/strut size on manufacturability and mechanical performance

Bioactive ceramic scaffolds for bone regeneration consisting of a three-dimensional mesh of interpenetrating struts with square section were fabricated via Digital Light Processing (DLP). The ability of the technique to manufacture 3D porous structures from β-tricalcium phosphate (β-TCP) powders with different dimensions of struts and pores was evaluated, identifying the possibilities and limitations of the manufacturing process. Small pore sizes were found to seriously complicate the elimination of excess slurry from the scaffold’s innermost pores. The effect of the strut/pore size on the mechanical performance of the scaffolds under compressive stresses was also evaluated, but no significant influence was found. Under compressive stresses, the structures resulted weaker when tested perpendicularly to the printing plane due to interlayer shear failure. Interlayer superficial grooves are proposed as potential failure-controlling defects, which could also explain the lack of a Weibull size effect on the mechanical strength of the fabricated DLP scaffolds.     

Application of Romero García method to the degradation process of DGEBA/ETDA filled with ultra fine metallic copper

Summary The thermal properties of an epoxy resin (diglycidyl ether Bisphenol A, DGEBA) cured with a primary amine (ethylenediamine, ETDA) and filled with 10, 20 and 30 wt. % of ultra fine copper particles were analyzed. The thermal results were evaluated by means of the Romero-Garcia method, which allowed to obtain the resin degradation kinetic parameters, as well as the possible decomposition mechanism. From the obtained results is possible to infer that higger copper content strongly affects the degradation process of the epoxy resin, which causes a drop off on the composites thermal stability. This behavior could be attributed to water presence, being this effect less pronounced for the resin with 10 wt. % copper and unfilled resin. Regarding to decomposition mechanism, three way transport showed the best correlation for all samples.     

The Chick Chorioallantoic Membrane Model: A New In Vivo Tool to Evaluate Breast Cancer Stem Cell Activity

The high plasticity of cancer stem-like cells (CSCs) allows them to differentiate and proliferate, specifically when xenotransplanted subcutaneously into immunocompromised mice. CSCs are highly tumorigenic, even when inoculated in small numbers. Thus, in vivo limiting dilution assays (LDA) in mice are the current gold standard method to evaluate CSC enrichment and activity. The chick embryo chorioallantoic membrane (CAM) is a low cost, naturally immune-incompetent and reproducible model widely used to evaluate the spontaneous growth of human tumor cells. Here, we established a CAM-LDA assay able to rapidly reproduce tumor specificities—in particular, the ability of the small population of CSCs to form tumors. We used a panel of organotropic metastatic breast cancer cells, which show an enrichment in a stem cell gene signature, enhanced CD44⁺/CD24^−/low cell surface expression and increased mammosphere-forming efficiency (MFE). The size of CAM-xenografted tumors correlate with the number of inoculated cancer cells, following mice xenograft growth pattern. CAM and mice tumors are histologically comparable, displaying both breast CSC markers CD44 and CD49f. Therefore, we propose a new tool for studying CSC prevalence and function—the chick CAM-LDA—a model with easy handling, accessibility, rapid growth and the absence of ethical and regulatory constraints.     

Exploring educational immersive videogames: an empirical study with a 3D multimodal interaction prototype

ABSTRACT

Gestural interaction devices emerged and originated various studies on multimodal human–computer interaction to improve user experience (UX). However, there is a knowledge gap regarding the use of these devices to enhance learning. We present an exploratory study which analysed the UX with a multimodal immersive videogame prototype, based on a Portuguese historical/cultural episode. Evaluation tests took place in high school environments and public videogaming events. Two users would be present simultaneously in the same virtual reality (VR) environment: one as the helmsman aboard Vasco da Gama’s fifteenth-century Portuguese ship and the other as the mythical Adamastor stone giant at the Cape of Good Hope. The helmsman player wore a VR headset to explore the environment, whereas the giant player used body motion to control the giant, and observed results on a screen, with no headset. This allowed a preliminary characterisation of UX, identifying challenges and potential use of these devices in multi-user virtual learning contexts. We also discuss the combined use of such devices, towards future development of similar systems, and its implications on learning improvement through multimodal human–computer interaction.     

IMPLEMENTING ENVIRONMENTAL FLOWS IN COMPLEX WATER RESOURCES SYSTEMS – CASE STUDY: THE DUERO RIVER BASIN,SPAIN

European river basin authorities are responsible for the implementation of the new river basin management plans in accordance with the European Water Framework Directive. This paper presents a new methodology framework and approach to define and evaluate environmental flow regimes in the realistic complexities that exist with multiple water resource needs at a basin scale. This approach links river basin simulation models and habitat time series analysis to generate ranges of environmental flows (e‐flows), which are evaluated by using habitat, hydropower production and reliability of water supply criteria to produce best possible alternatives. With the use of these tools, the effects of the proposed e‐flows have been assessed to help in the consultation process. The possible effects analysed are impacts on water supply reliability, hydropower production and aquatic habitat. After public agreements, a heuristic optimization process was applied to maximize e‐flows and habitat indicators, while maintaining a legal level of reliability for water resource demands. The final optimal e‐flows were considered for the river basin management plans of the Duero river basin. This paper demonstrates the importance of considering quantitative hydrologic and ecological aspects of e‐flows at the basin scale in addressing complex water resource systems. This approach merges standard methods such as physical habitat simulations and time series analyses for evaluating alternatives, with recent methods to simulate and optimize water management alternatives in river networks. It can be integrated with or used to complement other frameworks for e‐flow assessments such as the In‐stream Flow Incremental Methodology and Ecological Limits of Hydrologic Alteration. Copyright © 2011 John Wiley & Sons, Ltd.     

Cell formation in group technology using constraint programming and Boolean satisfiability

Cell formation consists in organizing a plant as a set of cells, each of them containing machines that process similar types or families of parts. The idea is to minimize the part flow among cells in order to reduce costs and increase productivity. The literature presents different approaches devoted to solve this problem, which are mainly based on mathematical programming and on evolutionary computing. Mathematical programming can guarantee a global optimal solution, however at a higher computational cost than an evolutionary algorithm, which can assure a good enough optimum in a fixed amount of time. In this paper, we model and solve this problem by using state-of-the-art constraint programming (CP) techniques and Boolean satisfiability (SAT) technology. We present different experimental results that demonstrate the efficiency of the proposed optimization models. Indeed, CP and SAT implementations are able to reach the global optima in all tested instances and in competitive runtime.     

Neurotrophic control of ovarian development

Substantial evidence now exists indicating that the neurotrophins, a family of growth factors required for the survival, development, and differentiation of various neuronal populations of the nervous system, are also important for the development of nonneuronal tissues. Such a function was first suggested by studies showing the presence of high-affinity neurotrophin receptors in a variety of nonneuronal tissues including those of the cardiovascular, endocrine, immune, and reproductive systems. Within the latter, the gonads appear to be a preferential site of neurotrophin action as suggested by the presence in the mammalian ovary of at least four of the five known neurotrophins and all of the neurotrophin receptors thus far identified. While the various functions that the neurotrophins may have in the ovary are still being elucidated, it is now clear that in addition to recruiting the ovarian innervation, they play a direct role in the regulation of two different maturational periods that are critical for the acquisition of female reproductive function: early follicular development and ovulation. Neurotrophins facilitate the development of newly formed follicles by promoting the initial differentiation and the subsequent growth of primordial follicles. These actions appear to be related to the ability of neurotrophins to sustain the proliferation of both mesenchymal and granulosa cells, and to induce the synthesis of follicle stimulating hormone (FSH) receptors. At the time of the first ovulation, neurotrophins contribute to the ovulatory cascade by increasing prostaglandin E(2) release, reducing gap junction communication, and inducing cell proliferation within the thecal compartment of preovulatory follicles.     

Bimodal polypropylene through binary metallocene catalytic systems: comparison between hybrid and mixed heterogeneous catalysts

Polypropylene with wider or bimodal molecular weight distribution is required for numerous applications since low molecular weight chains improve processability and high molecular weight fraction is required to get good mechanical properties. There are several routes to achieve a bimodal resin but the use of a binary catalytic system seems to be the most attractive, particularly with metallocenes combination. From a previous work two metallocenes were selected because they lead to polypropylenes with average molecular weights that differ in one order of magnitude. Two types of binary systems have been investigated, hybrid catalysts (two metallocenes loaded on the same support) and physical mixtures (two independent supported metallocenes that are introduced to the reactor and start the polymerization together), using different ratios, i.e., 25–75, 50–50, 75–25, at three reaction temperatures, i.e., 30, 50 and 70 °C. Most of the binary catalytic systems lead to bimodal molecular weight distributions. Polypropylenes produced by mixed catalysts are greatly influenced by the most active catalyst, while in PP coming from hybrid catalysts, as there is a strong interaction between both metallocenes, each one contributes according to its presence in the hybrid catalyst. Therefore, properties of obtained bimodal polypropylenes are quite influenced by the ratio between both metallocenes.     

Plastic limit load and its application to the fracture toughness testing for heterogeneous single edge notch tension specimens

The current investigation pursues the confirmation of the applicability of the limit load solutions in determination of the η factors necessary for fracture toughness testing protocols. The procedure begins with the correct calculation of limit load values in welded single edge notch tension (SE(T)) fracture specimens containing centreline cracks. Hence, the η factor is inferred through the principle of potential energy. Additionally, such results are compared with those obtained from finite element analyses, including strain hardening effects available in the literature. SE(T) specimens subject to pin‐loading display that the η factors are insensitive to the configurational effects and hardening properties. On the other hand, in clamped SE(T) specimens, such effects become meaningful, making its usage in fracture toughness experiments questionable. This work provides an alternative methodology to compute fully plastic proportionality coefficients (η) based on limit load solutions for heterogeneous cracked SE(T) specimens. These analyses also consider the limitations and potentialities of such an approach in experimental measurements of ductile crack growth.