Preparation of water‐repellent silks by a reaction with octadecenylsuccinic anhydride

Silk fibers and membranes were acylated with octadecenylsuccinic anhydride (ODSA) at 75°C for different times. Swelling [N,N‐dimethylformamide (DMF) and dimethyl sulfoxide (DMSO)] and nonswelling (xylene) solvent media were used for the reaction. Silk membranes that reacted in DMF or DMSO displayed faster reaction kinetics and attained higher weight‐gain values than fibers. The effect of the solvent on the reaction yield was in the following order: DMSO > DMF ? xylene. The Fourier transform infrared spectra of acylated silk samples showed the characteristic absorption bands of the anhydride at 2990, 2852, 1780–1700, and 1170 cm^?1. The intensity of the latter band, which increased linearly with the weight gain, was used as a marker for evaluating the reaction kinetics of the samples acylated in the nonswelling medium. The moisture regain and water retention of silk fibers acylated with ODSA decreased significantly, regardless of the solvent system used. Accordingly, the water repellency increased. Acylation induced an increase in the thermal stability of the silk fibers and membranes. Fine particles adhering to the surfaces of the silk fibers acylated in xylene were detected by scanning electron microscopy. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 324–332, 2003     

A computational approach to characterize formation of a passivation layer in lithium metal anodes

Li metal anode is the “Holy Grail” material of advanced Lithium-ion-batteries (LIBs). However, it is plagued by uncontrollable dendrite growth resulting in poor cycling efficiency and short-circuiting of batteries. This has spurred a plethora of research to understand the underlying mechanism of dendrite formation. While experimental studies suggest that there are complex physical and chemical interactions between heterogeneous solid-electrolyte interphase (SEI) and dendrite growth, most of the studies do not reveal the mechanisms triggering these interactions. To deal with this knowledge gap, we propose a multiscale modeling framework which couples kinetic Monte Carlo and Molecular Dynamics simulations. Specifically, the model has been developed to account for (a) heterogeneous SEI, (b) dendrite-SEI interactions, and (c) effect of electrolyte on Li electrodeposition and potential dendrite formation. This allows the proposed computational model to be extended to various electrolytes and SEI species and generate results consistent with previous experimental studies.     

Laser pyrolysis in papers and patents

Journal of Intelligent Manufacturing - This paper presents a critical review of laser pyrolysis. Although this technology is almost 60 years old, in literature many researchers, both from...     

Evaluation of in vitro antioxidant properties of some traditional Sardinian medicinal plants: Investigation of the high antioxidant capacity of Rubus ulmifolius

The antioxidant capacities of 11 botanical species used in the tradition of Sardinia as teas beverages or as decoction for medicinal purposes were evaluated using different in vitro methods (BR, TEAC, DPPH and FC). Among the various species, Rubus ulmifolius, resulted the more active with all the used methods. Phytochemical investigation on the extract yields in the isolation of several phenolic compounds namely caffeic acid, ferulic acid, quercetin-3-O-glucuronide, kaempferol-3-O-glucuronide, kaempferol-3-O-(6″-p-coumaroyl)-β-d-glucopyranoside, kaempferol-3-O-(6″-caffeoyl)-β-d-glucopyranoside, chlorogenic acid, 4-caffeoylquinic acid and 5-caffeoylquinic acid. The antioxidant activity of isolated compounds was also evaluated.     

Effect of extra virgin olive oil on glycaemia in healthy young subjects

In this approach we studied the glycaemia levels in 20 healthy young volunteers (26 ± 2 years), before and after a 30‐day intake of 50 mL of extra virgin olive oil (EVOO). We selected an oil rich in phenolic compounds (523 mg/L) with a high content of secoiridoidic derivatives (over 94.5%). The findings from our study reveal a significant decrease of glycaemia from 89.6 ± 6.8 to 82.7 ± 10.3 mg/dL (p<0.05), related to a long term daily intake of the study EVOO, as the only added fat. A significant increment of the HDL cholesterol, from 68.7 ± 11.5 to 75.2 ± 4.9 mg/dL, was also highlighted. Total cholesterol, LDL, VLDL, triglycerides, and blood pressure did not show significant variation after the 30‐day consumption of this EVOO. So far, few articles have described the influence of EVOO consumption, on plasma glucose levels in humans. This effect is observed in a group of healthy young humans. Moreover, we confirm that the level of free hydroxytyrosol (OH‐Tyr) in plasma increased up to fourfold (p<0.05) after the 30‐day intake of this EVOO. In addition, the excretion in urine of the main metabolite of OH‐Tyr, homovanillic acid (HVA), significantly increased.     

On the association between poly(vinyl alcohol) and sodium dodecyl sulfate and its effect on liquid–liquid interfacial tension: A mathematical model

Association between poly(vinyl alcohol-co-vinyl acetate) copolymer (PVA) and sodium dodecyl sulfate (SDS) was studied experimentally and theoretically. It was found that, for the ethyl acetate-aqueous phase interface in which PVA was previously adsorbed, the interfacial tension (γ) increases abruptly to a maximum and then exhibits a relatively mild decay with the addition of SDS to the aqueous phase. The theoretical results indicate that vinyl acetate (VAc) segments determine γ. However, for relatively low concentrations of SDS (C_SDS), this latter plays a major role because through its association with the VAc segments it modulates the extent to which PVA is adsorbed at the interface, indirectly determining the value of γ. As C_SDS approaches to the CMC value for SDS, its influence on γ decreases because SDS tends to self-assembly rather than associates with VAc. These model predictions are consistent with experimental findings reported in the literature.     

Determination of tylosin in milk samples by poly(ethylene terephthalate)-based molecularly imprinted polymer

Poly(ethylene terephthalate)-based molecularly imprinted polymers (MIPs) were synthesized, and their recognition capability was evaluated. Adsorption isotherm was described by the Langmuir model and the maximum adsorption capacity of MIP_Ty reached 172.4 mg g⁻¹ in water at pH 6.2. A recognition coefficient of 1.17 was obtained. A solid-phase extraction cartridge was manufactured and its behavior was evaluated for tylosin extraction from aqueous and milk samples. An off-line SPE-UV method was applied. An acceptable linearity was obtained in the range of 1–20 μg ml⁻¹ and the average recovery at three spike levels in milk samples was higher than 92%. The limit of quantification was 2.6 × 10⁻² μg ml⁻¹. The manufactured SPE cartridge has a great potential for clean-up processes in complex media. The cartridge offers a fast and sensitive option to the existing sorbents for extracting this drug from milk samples.     

Anti‐Oxygen Leaking LiCoO2

LiCoO₂ is a prime example of widely used cathodes that suffer from the structural/thermal instability issues that lead to the release of their lattice oxygen under nonequilibrium conditions and safety concerns in Li‐ion batteries. Here, it is shown that an atomically thin layer of reduced graphene oxide can suppress oxygen release from Li_xCoO₂ particles and improve their structural stability. Electrochemical cycling, differential electrochemical mass spectroscopy, differential scanning calorimetry, and in situ heating transmission electron microscopy are performed to characterize the effectiveness of the graphene‐coating on the abusive tolerance of Li_xCoO₂. Electrochemical cycling mass spectroscopy results suggest that oxygen release is hindered at high cutoff voltage cycling when the cathode is coated with reduced graphene oxide. Thermal analysis, in situ heating transmission electron microscopy, and electron energy loss spectroscopy results show that the reduction of Co species from the graphene‐coated samples is delayed when compared with bare cathodes. Finally, density functional theory and ab initio molecular dynamics calculations show that the rGO layers could suppress O₂ formation more effectively due to the strong C? O_cathode bond formation at the interface of rGO/LCO where low coordination oxygens exist. This investigation uncovers a reliable approach for hindering the oxygen release reaction and improving the thermal stability of battery cathodes.     

A Model for Liquid-Striped Liquid Phase Separation in Liquids of Anisotropic Polarons

The phase separation between a striped polaron liquid at the particular density and a high density polaron liquid is described by a modified Van der Waals scheme. The striped polaron liquid represents the pseudo gap matter or Wigner-like polaron phase at 1/8 doping in cuprate superconductors. The model includes the tendency of pseudo-Jahn-Teller polarons to form anisotropic directional bonds at a preferential volume with the formation of different “liquid phases”. The model gives the coexistence of a first low density polaron striped liquid and a second high density liquid that appears in cuprate superconductors for doping larger than 1/8. We discuss how the strength of anisotropic bonds controls the variation the phase separation scenarios for complex systems in the presence of a quantum critical point where the phase separation vanishes.