A thermal perspective of flash sintering: The effect of AC current ramp rate on microstructure evolution

In flash sintering experiments, the thermal history of the sample is key to understanding the mechanisms underlying densification rate and final properties. By combining robust temperature measurements with current-ramp-rate control, this study examined the effects of the thermal profile on the flash sintering of yttria-stabilized zirconia, with experiments ranging from a few seconds to several hours. The final density was maximized at slower heating rates, although processes slower than a certain threshold led to grain growth. The amount of grain growth observed was comparable to a similar conventional thermal process. The bulk electrical conductivity correlated with the maximum temperature and cooling rate. The only property that exhibited behavior that could not be attributed to solely the thermal profile was the grain boundary conductivity, which was consistently higher than conventional in flash sintered samples. These results suggest that, during flash sintering, athermal electric field effects are relegated to the grain boundary.     

An expert aid to fault diagnosis and trouble-shooting in satellitecommunications

Presents the Satellite Communications Network Expert (SaNE), a knowledge-based aid designed to provide engineering support for fault diagnosis. The SaNE is composed of two elements: a satcom network model, which simulates the structure and functionality of a system based loosely upon a large military satcom network, and a diagnostic component, which uses knowledge- and model-based reasoning techniques to analyse system anomalies and diagnose possible causes for the alarms such networks generate. The development cycle is described, emphasising lessons learnt during development and testing and the advantages and disadvantages of the techniques applied. The goal of the SaNE project is primarily commercial acceptance rather than innovation. The authors illustrate how novel concepts can be implemented in a practical system without compromising this goal     

Influence of interfacial microcracks on the elastic properties of composites

A model is established to quantify the influence of interfacial microcracks on the elastic properties of a particulate composite using a combination of theoretical and finite element analysis. A unique way to construct physical models which could accommodate both crack size and crack density is proposed. Based on energy principles, the influence of a dilute concentration of interfacial microcracks is first studied. The case of a finite concentration of microcracks is solved subsequently by combining the dilute concentration solutions and the differential scheme. Both cases agreed well with existing composite theories for the limiting condition of complete decohesion. The final model predicts the effective elastic properties as functions of both crack size and microcrack density.     

On upgrading the numerics in combustion chemistry codes

A method of updating and reusing legacy FORTRAN codes for combustion simulations is presented using the DAEPACK software package. The procedure is demonstrated on two codes that come with the CHEMKIN-II package, CONP and SENKIN, for the constant-pressure batch reactor simulation. Using DAEPACK generated code, analytical derivative calculations, sparsity pattern information, and hidden discontinuity information can be obtained for the models of interest. This information can be easily integrated with different solvers giving the modeler great flexibility in selecting the best solution procedure. Using the generated code, the CONP code was connected to three different solvers, and the SENKIN code was connected to two different solvers. The effect of model formulation, analytical derivatives, sparsity, and sensitivity equation solution method were analyzed for three large kinetic mechanisms for methane, acetylene, and n-heptane. For the n-heptane model, with 544 species and 2446 reactions, a factor of 10-speed improvement over the original solution procedure was found using analytical derivatives and sparse linear algebra. For sensitivity calculations, for a small number of parameters, a factor of 55 improvement over the original solution procedure was found for the n-heptane problem. Upon closer examination of results, no one method is found to always be superior to other methods, and selection of the appropriate solution procedure requires an examination of the specific kinetic mechanism, which is easily conducted using DAEPACK generated code.     

第三代手机射频架构

大多数电信企业为获得3G许可证投入了巨额资金，现在他们还需要进行基础设施投资，以为这一企盼已久的技术提供支持。总的成本将会达数十亿英磅，因此电信商面临很大的压力，需要尽快偿还债务并快速获得赢利，达到这一目标的最快速的方法还是尽快启动3G的消费市场。对于价格竞争激烈的多媒体功能等服务，赢得消费者和商业客户青睐并迅速收回投资的关键是提供价格合理的手机。包括发射器和接收器在内的手机内部电路在手机成本中占了相当大的部分。为降低3G手机射频解决方案的总体成本，必须满足三个主要目标：即降低芯片成本、减少外部器件…     

Critical Speed Control of a Solar Car

The World Solar Challenge is a 3000 km race for solar powered cars across the Australian continent from Darwin to Adelaide. Each car is powered by a panel of photovoltaic cells which convert sunlight into electrical power. The power can be used directly to drive the car or stored in a battery for later use. Previous papers (P. Howlett, P. Pudney, T. Tarnopolskaya, and D. Gates, IMA Journal of Mathematics Applied in Business and Industry vol. 8, pp. 59–81, 1997; P.G. Howlett and P.J. Pudney, Dynamics of Continuous, Discrete and Impulsive Systems vol. 4, pp. 553–567, 1998) using a simplified model of the battery, have shown that the optimal strategy is essentially a speedholding strategy. In this paper, with a more realistic model of the battery, we show that the optimal driving strategy is a critical speed strategy. For an optimal journey with no beginning and no ending the solar car must always travel at the critical speed. For an optimal journey of finite length the speed must be close to the critical speed for most of the journey. The critical speed depends on the solar power and will normally vary slowly with time.     

Analysis of polar compound classes in SRC-II liquids: Comparison of non-aqueous titrametric,i.r. spectrometric and h.p.l.c. methods

Results for various types of polar compounds in SRC-11 coal-derived liquids and other fuels were obtained by one or more of the three analytical methods: non-aqueous titration, i.r. spectroscopy and h.p.l.c. Practical aspects as well as precision, accuracy and assumptions necessary for effective application of each of the methods are discussed. H.p.l.c. is applicable to the widest variety of compound types, is the most rapid, most sensitive and shows the best promise for increased development and improvement. Application and development of these techniques is a logical step toward improving process monitoring, catalyst development, toxicological screening and general fuel analysis.     

ELECTRICALLY CONDUCTING GLASSES*

Glasses containing lead, bismuth, or antimony oxides or combinations of these become conducting after several hours’ reduction in hydrogen. The electronic surface conductivity is both stable and reproducible. The magnitude of the conductivity depends on the nature and amounts of the reducible oxides, the temperatures at which reduction is carried out, and the electrical influence of the nonreduced portions of the glasses.     

The role of benchmarking for yardstick competition

With the increasing interest in yardstick regulation, there is a need to understand the most appropriate method for realigning tariffs at the outset. Benchmarking is the tool used for such realignment and is therefore a necessary first-step in the implementation of yardstick competition. A number of concerns have been raised about the application of benchmarking, making some practitioners reluctant to move towards yardstick based regimes. We assess five of the key concerns often discussed and find that, in general, these are not as great as perceived. The assessment is based on economic principles and experiences with applying benchmarking to regulated sectors, e.g. in the electricity and water industries in the UK, The Netherlands, Austria and Germany in recent years. The aim is to demonstrate that clarity on the role of benchmarking reduces the concern about its application in different regulatory regimes. We find that benchmarking can be used in regulatory settlements, although the range of possible benchmarking approaches that are appropriate will be small for any individual regulatory question. Benchmarking is feasible as total cost measures and environmental factors are better defined in practice than is commonly appreciated and collusion is unlikely to occur in environments with more than 2 or 3 firms (where shareholders have a role in monitoring and rewarding performance). Furthermore, any concern about companies under-recovering costs is a matter to be determined through the regulatory settlement and does not affect the case for using benchmarking as part of that settlement.