Comparative analysis of formaldehyde and toluene sorption on indoor floorings and consequence on Indoor Air Quality

Indoor surfaces may be adsorptive sinks with the potential to change Indoor Air Quality. To estimate this effect, the sorption parameters of formaldehyde and toluene were assessed on five floorings by an experimental method using solid-phase microextraction in an airtight emission cell. Adsorption rate constants ranged from 0.003 to 0.075 m·h⁻¹, desorption rate constants from 0.019 to 0.51 h⁻¹, and the partition coefficient from 0.005 to 3.9 m, and these parameters vary greatly from one volatile organic compound/material couple to another indicating contrasted sorption behaviors. A rubber was identified as a sink of formaldehyde characterized by a very low desorption constant close to 0. For these sorbent floorings identified, the adsorption rates of formaldehyde are from 2 to 4 times higher than those of toluene. Two models were used to evaluate the sink effects of floorings on indoor pollutant concentrations in one room from different realistic conditions. The scenarios tested came to the conclusion that the formaldehyde sorption on one rubber (identified as a sink) has a maximum contribution from 15% to 21% for the conditions of low air exchange rate. For other floorings, the sorption has a minor contribution less than or equal to 5%, regardless of the air exchange rate.     

In situ efficiency of filters in residential central HVAC systems

High-efficiency filtration in residential forced-air heating, ventilation, and air conditioning (HVAC) systems protects equipment and can reduce exposure to particulate matter. Laboratory tests provide a measure of the nominal efficiency, but they may not accurately reflect the in situ efficiency of the filters because of variations in system conditions and changes in filter performance over time. The primary focus of this paper is to evaluate the effective filtration efficiency, which is inclusive of any loading and system impacts, in 21 occupied residential homes through in-duct concentration measurements. We considered the role of filter media by testing both electret and non-electret media, as well as the role of loading by considering new and used filters. The results show that filters with higher nominal efficiency generally had higher effective filtration efficiency in the same home. In terms of performance change, there is no significant difference in efficiency between initial and 3-month non-electret filters, but the efficiency of electret filters generally decreased over time. However, both nominal efficiency and performance change were vastly overshadowed by the wide variety in loading and system conditions across homes, making it hard to predict filter efficiency in a given home without in situ measurements.     

Synthesis of Long-Chain β-Lactones and Their Antibacterial Activities against Pathogenic Mycobacteria

In the quest for new antibacterial agents, a series of novel long- and medium-chain mono- and disubstituted β-lactones was developed. Their activity against three pathogenic mycobacteria—M. abscessus, M. marinum, and M. tuberculosis—was assessed by the resazurin microtiter assay (REMA). Among the 16 β-lactones synthesized, only 3-hexadecyloxetan-2-one (VM005) exhibited promising activity against M. abscessus, whereas most of the β-lactones showed interesting activities against M. marinum, similar to that of the classical antibiotic, isoniazid. Regarding M. tuberculosis, six compounds were found to be active against this mycobacterium, with β-lactone VM008 [trans-(Z)-3-(hexadec-7-en-1-yl)-4-propyloxetan-2-one] being the best growth inhibitor. The promising antibacterial activities of the best compounds in this series suggest that these molecules may serve as leads for the development of much more efficient antimycobacterial agents.     

Impact of the anode operating conditions on the liquid water distribution in the cathode gas diffusion layer

Previous experimental results indicate that the humidification conditions at the anode have an impact on the liquid water distribution in the cathode gas diffusion layer. Numerical simulations are developed to reproduce and analyze this effect. Results consistent with the experimental results are first obtained by playing with the partition coefficients of an advanced pore network model computing the liquid water formation and transfer in the cathode gas diffusion layer (GDL) for a large range of operating conditions. Then, a model for the full anode – cathode assembly is developed by combining the pore network model of the cathode GDL and a 1D model describing the heat and water transfer in the various components of the anode-cathode assembly. This enables one to generalize the dry – wet regime diagram introduced in a previous work by incorporating the effect of the humidity condition at the anode.     

Spatio-temporal evolution of the deformation around the Rio-Patras fault (Greece) observed by synthetic aperture radar interferometry from 1993 to 2017

We analysed the ground deformation across two blocks defined by the Rio-Patras fault from 1993 to 2017 using multi-temporal Synthetic Aperture Radar Interferometry (InSAR) techniques. Our main objective was to contribute to the assessment of seismic hazard near the large city of Patras. Multiple data-sets were used, each one covering different temporal periods. Descending and ascending acquisitions, providing different viewing geometries contribute to fully determine the ground displacement in 3D. The data-sets used are from the European Space Agency’s (ESA) European Remote Sensing (ERS), Environmental Satellite (ENVISAT) and SENTINEL-1 as well as German Aerospace Center (DLR) ’s TERRASAR-X missions. Considering ESA’s missions covering both acquisition geometries and long periods, the southern block, showing lack of a sufficient number of scatterers does not allow the displacement characterization. In contrary, the northern block is characterized by a high number of scatterers having values of maximum likehood ranging from ?3.5 to ?4.3 mm year^?1 for ascending geometry and from ?1.6 to ?2.7 mm year^?1 for the descending one. The fact that both geometries show negative values of displacements are consistent with downlift movement and at the same time the quantitative differentiation probably indicates an horizontal component as well.     

Cognitive-behavioral therapy and relationship therapy in the treatment of children referred for antisocial behavior.

112 children (aged 7-13 yrs) were randomly assigned to one of three treatments: problem-solving skills training (PSST), problem-solving skills training with in vivo practice (PSST-P), which included therapeutically planned activities to extend training to settings outside of treatment, or client-centered relationship therapy (RT). PSST and PSST-P children showed significantly greater reductions in antisocial behavior and overall behavior problems, and greater increases in prosocial behavior than RT children. These effects were evident on measures obtained immediately after treatment and at a 1-year follow-up, and on measures of child performance at home and at school. PSST-P children showed greater changes than PSST children on measures of functioning at school at posttreatment, but these differences were no longer evident at follow-up. Children in both PSST conditions showed significant reductions in deviant behavior and improvements in prosocial behavior from pretreatment to follow-up, whereas RT children tended to remain at their pretreatment level of functioning. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Eliminating memory for fragmentation within partitionable SIMD/SPMDmachines

Efficient data layout is an important aspect of the compilation process. A model for the creation of perfect memory maps for large-scale parallel machines capable of user-controlled partitionable single-instruction-multiple data/single-program-multiple data (SIMD/SPMD) operation is developed. The term perfect implies that no memory fragmentation occurs and ensures that the memory map size is kept to a minimum. A major constraint on solving this problem is based on the single program nature of both the SIMD and SPMD modes of parallelism. It is assumed that all processors within the same submachine used identical addresses to access corresponding data items in each of their local memories. Necessary and sufficient conditions are derived for being able to create perfect memory maps, and results are applied to several partitionable interconnection networks     

洞穴——从微中子研究到地下空间规划

微中子研究需要很大很深的洞穴，以便在没有太多宇宙射线噪音的情况下捕获重要事件。大型的自然洞穴往往出现在喀斯特石灰岩地区，少数大型洞穴也会出现在矿区，而民用洞穴则被广泛用作发电站、火车站、仓库及其他用途。应力控制被认为是在洞穴深挖中消除巨大应力的普遍方法。如果能够在大型洞穴使用应力控制方法，我们就可以建造安全的洞室来进行微中子研究；从另一方面来讲，大而浅的洞穴也能解决城市规划的很多问题。     

Predicting Acute Renal Failure after Cardiac Surgery: Validation and Re‐definition of a Risk‐Stratification Algorithm

Background:  Acute renal failure (ARF) after cardiac surgery is associated with significant morbidity and mortality, irrespective of the need for dialysis. Previous studies have attempted to identify predictors of ARF and develop risk stratification algorithms. This study aims to validate the algorithm in an independent cohort of patients that includes a significant proportion of female and black patients and compares two different definitions of renal outcome.
Methods:  A large single center cardiac surgery database was examined (n, 24,660; 1993–2000) which included 29.9% females and 3.7% black patients. Post‐operative ARF was defined as: a) ARF requiring dialysis, b) > 50% reduction in creatinine clearance relative to baseline or requiring dialysis. Clinical variables related to baseline renal function and cardiovascular disease were used in recursive partitioning analysis for both outcome definitions. Chi‐square goodness of fit analysis was performed to validate the algorithm.
Results:  The frequency of post‐operative ARF requiring dialysis ranged between 0.5 and 15.5% based on the risk categories with the area under the receiver operating characteristic (ROC) curve of 0.78. Using the more inclusive definition of ARF, the frequency was significantly higher ranging from 2.6 to 25%(P < 0.001) with an area under ROC curve of 0.65.
Conclusions:  The renal risk stratification algorithm is valid in predicting post‐operative ARF in an independent cohort of patients, well represented by differences in gender and race. Since the need for dialysis remains subjective, a more objective and inclusive definition of ARF may help in identifying a larger number of patients 'at‐risk'.     

Changing our view on design evaluation meetings methodology: a study of software technical review meetings

By contrast to design meetings, design evaluation meetings (DEMs) have generally been considered as situations in which, according to DEM methodologies, design activities are quite marginal. In a study of DEMs in software development, i.e. in technical review meetings following a particular review methodology, we showed: (i) the occurrence of design activities as part of an argumentation process; (ii) the relative importance of cognitive synchronisation as a prerequisite for evaluation; (iii) the important role played in evaluation by argumentation that makes explicit the underlying design rationale (DR). On the basis of our results, we discuss the potential for using DR methodologies in this kind of meetings.