Effects of interstitial oxygen on microstructure and mechanical properties of Ti-48Al-2Cr-2Nb with fully lamellar and duplex microstructures

The effect of added oxygen in the range of 1000 to 4000 wt ppm on the microstructures of a Ti-48Al-2Cr-2Nb alloy has been investigated and compared to the microstructures for a high-purity alloy. For specimens cooled from theα phase, interstitial oxygen stabilizes the lamellar microstructure with respect toγ grains, with higher than equilibrium values for theα ₂ volume fraction. For specimens cooled from theα +γ phase field, the lamellar microstructure still tends to be favored by oxygen, but it is found that the phase volume fractions are not significantly different from equilibrium values. This suggests that interstitial O essentially reduces the kinetics of theα toα +γ transformation. Thus, interstitial oxygen will have a strong effect on microstructures obtained by continuous cooling fromα, but significantly less on those, such as the duplex microstructure, obtained by long treatment in theα +γ phase field. In general, increased O content is well correlated with reduced ductility. Finally, the role of interstitial oxygen on this phase transformation is discussed.     

New superconducting equiatomic ternary silicides MIrSi (M = Y,Zr, Hf) with TiNiSi-type structure (anti-PbCl2)

New equiatomic ternary silicides MIrSi (M = Y, Ti, Zr, Hf) crystallizing with the TiNiSi-type structure (anti-PbCl₂) have been prepared. Those with Y(T_cr = 2.70 K), Zr(T_cr = 2.04 K) and Hf(T_cr = 3.50 K) are the first superconducting ternary silicides having such a structure. The titanium compound has not been found to be superconducting above 1.7 K.     

Cast bulk ZrTiAlCuNi amorphous alloys

Cylindrical bulk amorphous samples with diameters up to 10 mm have been prepared by casting ZrTiAlCuNi alloys in a copper mould. In order to rank glass-forming ability as a function of alloy composition, alloys were also cast into wedge-shaped moulds; to a first approximation, the thickness of the amorphous region obtained can be taken as an indication of glass-forming ability. The compositions which lead to the production of bulk glasses all have reduced glass transition temperatures in excess of 0.65 and the extremely high glass-forming ability of these compositions is discussed. We suggest that both the Al and Ti contents are determining factors for the production of bulk amorphous samples and these are believed to reduce the driving force for, and hence the rate of, crystallisation. These amorphous alloys have been found to display high thermal stability and can be annealed for several minutes in the supercooled liquid region. They are ductile at room temperature and have a high value of yield stress.     

Nonlinear black-box modeling in system identification: a unified overview

A nonlinear black-box structure for a dynamical system is a model structure that is prepared to describe virtually any nonlinear dynamics. There has been considerable recent interest in this area, with structures based on neural networks, radial basis networks, wavelet networks and hinging hyperplanes, as well as wavelet-transform-based methods and models based on fuzzy sets and fuzzy rules. This paper describes all these approaches in a common framework, from a user's perspective. It focuses on what are the common features in the different approaches, the choices that have to be made and what considerations are relevant for a successful system-identification application of these techniques. It is pointed out that the nonlinear structures can be seen as a concatenation of a mapping form observed data to a regression vector and a nonlinear mapping from the regressor space to the output space. These mappings are discussed separately. The latter mapping is usually formed as a basis function expansion. The basis functions are typically formed from one simple scalar function, which is modified in terms of scale and location. The expansion from the scalar argument to the regressor space is achieved by a radial- or a ridge-type approach. Basic techniques for estimating the parameters in the structures are criterion minimization, as well as two-step procedures, where first the relevant basis functions are determined, using data, and then a linear least-squares step to determine the coordinates of the function approximation. A particular problem is to deal with the large number of potentially necessary parameters. This is handled by making the number of ‘used’ parameters considerably less than the number of ‘offered’ parameters, by regularization, shrinking, pruning or regressor selection.     

Adsorption of block copolymers at latex surface and their utilization in emulsion polymerization

Amphiphilic block copolymers have been investigated for their utilization in emulsion polymerization of butyl methacrylate. Special attention has been paid to the adsorption mechanism of the block copolymers from systematic measurements of equilibrium adsorption isotherms. A series of well-defined water-soluble amphiphilic block copolymers, composed of poly(butyl methacrylate) and poly(sodium methacrylate) blocks, were synthesized by anionic polymerization of butyl methacrylate and tert-butyl methacrylate followed by the thermal deprotection of the tert-butyl ester groups and final hydrolysis. The number density of emulsion polymer particles N_P varied as [copolymer]^α, α lying between 0.44 and 0.73 according to the hydrophilic content of the copolymers. In contrast with SDS taken as a reference emulsifier, the adsorption of the copolymers was very strong and this provided quite an efficient stabilization of the polymer particles during emulsion polymerization, even at low concentrations (<10⁻⁴ mol L⁻¹) and low coverages (<10% of the interfacial area).     

Polyunsaturated fatty acids in tissues of rats fed trielaidin and high or low levels of linolenic acid

Male and female weanling rats that were born to dams fed a diet low in linolenic acid received diets of 15% lipids by weight containing 45% elaidic acid (as trielaidin) and 8.5% or 0.1% linolenic acid for 10 weeks. Four other groups, in which palmitic or oleic acid replaced elaidic acid in the diet, served as controls. The fatty acid profiles of several lipid classes were determined in adipose tissue, adrenals, testes, heart and brain. Elaidic acid was incorporated into tissue lipids in varying degrees, depending on the organ and on the lipid class. Feeding elaidic acid induced no changes in the polyunsaturated fatty acid (PUFA) profiles of testes lipids but resulted in definite modifications of the PUFA patterns of heart phosphatidylcholine (PC) and phosphatidylethanolamine (PE). In linolenic acid-deprived rats, arachidonic acid was decreased in PC and linoleic acid was increased in both PC and PE; 22∶5n−6 was strongly depressed in both PC and PE. In linolenic acid-fed rats, 22∶6n−3 was decreased in PC and PE. These changes, on the whole, were more evident in females, and some also were observed in adrenal cholesteryl esters but only slightly in brain phospholipids. the apparent inhibition of the biosynthesis of PUFA induced by dietary elaidic acid appeared to be complex and of greater intensity in the n−6 fatty acid series than in their n−3 homologues.     

Young's modulus repeatability assessment using cycling compression loading on cancellous bone

For various applications, precision of the Young's modulus of cancellous bone specimens is needed. However, measurement variability is rarely given. The aim of this study was to assess the Young's modulus repeatability using a uniaxial cyclic compression protocol on embedded specimens of human cancellous bone. Twelve specimens from 12 human calcanei were considered. The specimens were first defatted and then 1 or 2 mm at the ends were embedded in an epoxy resin. The compression experiment consists in applying 20 compressive cycles between 0.2 per cent and 0.6 per cent strain with a 2 Hz loading frequency. The coefficient of variation of the current protocol was found to be 1.2 percent. This protocol showed variability similar to the end-cap technique (considered as a reference). It can be applied on porous specimen (especially human bone) and requires minimal bone length to limit end-artifact variability. The current method could be applied in association with noninvasive measurements (such as ultrasound) with full compatibility. This possibility opens the way for bone damage follow-up based on Young's modulus monitoring.     

Supporting multiple perspectives in feature-based configuration

Feature diagrams have become commonplace in software product line engineering as a means to document variability early in the life cycle. Over the years, their application has also been extended to assist stakeholders in the configuration of software products. However, existing feature-based configuration techniques offer little support for tailoring configuration views to the profiles of the various stakeholders. In this paper, we propose a lightweight, yet formal and flexible, mechanism to leverage multidimensional separation of concerns in feature-based configuration. We propose a technique to specify concerns in feature diagrams and to generate automatically concern-specific configuration views. Three alternative visualisations are proposed. Our contributions are motivated and illustrated through excerpts from a real web-based meeting management application which was also used for a preliminary evaluation. We also report on the progress made in the development of a tool supporting multi-view feature-based configuration.     

Mechanical characterization and modeling of the deformation and failure of the highly crosslinked RTM6 epoxy resin

The nonlinear deformation and fracture of RTM6 epoxy resin is characterized as a function of strain rate and temperature under various loading conditions involving uniaxial tension, notched tension, uniaxial compression, torsion, and shear. The parameters of the hardening law depend on the strain-rate and temperature. The pressure-dependency and hardening law, as well as four different phenomenological failure criteria, are identified using a subset of the experimental results. Detailed fractography analysis provides insight into the competition between shear yielding and maximum principal stress driven brittle failure. The constitutive model and a stress-triaxiality dependent effective plastic strain based failure criterion are readily introduced in the standard version of Abaqus, without the need for coding user subroutines, and can thus be directly used as an input in multi-scale modeling of fibre-reinforced composite material. The model is successfully validated against data not used for the identification and through the full simulation of the crack propagation process in the V-notched beam shear test.