Morphological investigations of a textured black copper selective coating

The microstructural investigations of a textured black copper selective coating are reported. These surfaces possess remarkably high initial absorptance 0.97 to 0.98 and emittance ₁₀₀ 0.2 ± 0.02. These surfaces reveal a new sponge-like, porous, layered microstructure. They are made of loosely packed long and fine grains which appear randomly distributed. The copper grains are dispersed in a semiconductor oxide matrix. The spacing between these grains is of the order of solar wavelength. Also, these surfaces possess opulent solar selectivity and structural stability up to 250° C in air and under vacuum conditions.     

Anti-BlUFf: towards counterfeit mitigation in IC supply chains using blockchain and PUF

International Journal of Information Security - The complexity of today’s integrated circuit (IC) supply chain, organised in several tiers and including many companies located in different...     

Distributed Dynamic Backhauling in Aerial Heterogeneous Networks

Wireless Personal Communications - A Wireless Mesh Network (WMN) is a multi-hop network that gains the benefits of low deployment cost, fast access speed, expanded service coverage and large...     

Exploring relationships between satiation,perceived satiety and plant-based snack food features

We aimed to identify relations between satiation and subsequent satiety for six plant-based foods (apple, avocado, banana, carrot, chick pea and macadamia) using a panel of ten healthy participants and a complete crossover randomised design. Food was served as a mid-morning snack ad libitum over 20 min until participants were comfortably full, and subsequent satiety was monitored for up to 180 min. Carrot and macadamia had significantly higher perceived fullness during eating, but also significantly lower perceived satiety per gram than other foods. Food energy factors had no strong relationship with perceived fullness, but were significantly positively correlated with satiety. Mastication number had significant effects on both perceived fullness (negative) and satiety (positive). This pilot study showed that plant food factors affecting perceived fullness during eating and subsequent satiety are different, and suggests how portion control through satiation for different plant-based snacks may influence both energy intake and subsequent satiety.     

Review on nano-and microfiller-based polyamide 6 hybrid composite: Effect on mechanical properties and morphology

Polyamide 6 (PA6)-based composites are of evolving interest due to its high strength, wear resistance, and barrier properties. The use of binary composites mostly with nanomaterial and glass fibers has been reviewed and presented in literature. However to obtain a balance of properties like stiffness, toughness, and strength along with cost reduction, ternary composites of PA6 have been designed. To achieve the balance, PA6 blend-based composites, with combination of microfiller/nanofiller or PA6 with combination micro-microfiller, PA6 with microfiller/nanofiller and fiber have been designed. The properties of PA6-based ternary hybrid composites depend on type of dispersed phase used, presence of compatibilizer, type of filler used (nanofiller or microfiller or fiber or hybrid) and combination of fillers used. However, a review in this direction is not available in literature. Here, in this study, an overall understanding of various fillers, dispersed phase, and their combinations can be understood along with the discussion on effect of these on tensile properties and morphology of hybrid composite. In this study, an attempt has been made to review the various fillers and dispersed phase and their combinations which have been used in designing the PA6 hybrid composite with good balance of stiffness, toughness, and strength.     

Kinetic analysis of bile salt passage across a dialysis membrane in the presence of cereal soluble dietary fibre polymers

The kinetics of passage of a model bile salt and complete porcine bile across a dialysis membrane, in the presence and absence of two cereal-derived soluble dietary fibre polysaccharides, were studied as a model for passage across the unstirred water layer that lines the small intestine. A first-order kinetic analysis allowed rate coefficients to be derived which quantified the effectiveness of barley mixed linkage β-glucan and wheat arabinoxylan in retarding the transport of bile. For both, a model bile salt and complete porcine bile, rate coefficients decreased with both concentration and viscosity. A combination of viscosity and molecular interaction effects is suggested to control the effect of the two polysaccharides on the transport of bile.     

Room temperature response and enhanced hydrogen sensing in size selected Pd-C core-shell nanoparticles: Role of carbon shell and Pd-C interface

In the present work, the effect of carbon shell around size selected palladium (Pd) nanoparticles on hydrogen (H₂) sensing has been studied by investigating the sensing response of Pd-C core-shell nanoparticles having a fixed core size and different shell thickness. The H₂ sensing response of sensors based on Pd and Pd-C nanoparticles deposited on SiO₂ and graphene substrate has been measured over a temperature range of 25 °C–150 °C. It is observed that Pd-C nanoparticle sensor shows higher sensitivity with increase in shell thickness and faster response/recovery in comparison to that of Pd nanoparticle samples. Pd-C nanoparticles show room temperature H₂ sensitivity in contrast to Pd nanoparticles which respond only at higher temperatures. Role of carbon shell is also understood by investigating H₂ sensing properties of Pd and Pd-C nanoparticles on graphene substrates. These results show that higher catalytic activity and electronic interaction at Pd-C interface, a complete coverage and protection of Pd surface by carbon and presence of structural defects in nanoparticle core are important for room temperature and higher sensing response.     

The Minimum Weight Dominating Set Problem for Permutation Graphs Is in NC

In this paper, we show that the problem of finding a minimum weight dominating set in a permutation graph, where a positive weight is assigned to each vertex, is in NC by presenting an O(log n) parallel algorithm with polynomially many processors on the CRCW model.     

Quick and reliable estimation of BOD load of beverage industrial wastewater by developing BOD biosensor

An amperometric biosensor for determination of biochemical oxygen demand in wastewater has been developed to overcome the time consuming monitoring procedures. The performance and stability of the immobilized membrane have been investigated at 37 °C and pH 6.8. Immobilized microbial membranes maintain their stability and activity after intermittent use for 400 cycles when stored at 4 °C in sodium phosphate buffer pH 6.8. The response time of the BOD sensor was only 90 min, being independent of the concentration, and the lower detection limit was 1 mg/l. The obtained BOD values showed correlation with that of the conventional method for BOD determination (BOD5) with a deviation of ±10%. Moreover, the sensor exhibits good repeatability (3.39–4.45%) and reproducibility (1.85–2.25%). Software was added to upgrade this sensor and to make it a promising candidate for online monitoring.     

Application of moisture activated dry granulation (MADG) process to develop high dose immediate release (IR) formulations

Moisture activated dry granulation (MADG) method was used to develop IR tablets with cohesive, fluffy and high dose drugs. To evaluate this approach, three drugs: metformin hydrochloride, acetaminophen and ferrous ascorbate were selected as model compound along with three binders: maltodextrin DE16, PVP K 12 and HPC. The granules were generated using MADG method and tablets were prepared using rotary tablet press. The granules and tablets were characterized for particle size analysis, flow properties, tablet hardness, friability, moisture content, dissolution study, disintegration time and stability study. All results were found to be within acceptable limits. Development of all formulation tablets were found as best fitted for an immediate release of Metformin hydrochloride, acetaminophen and ferrous ascorbate. MADG delivered a robust manufacturing process for generation of granules with excellent flowability. The tablets prepared using this method were found to show better content uniformity, good compactability and low friability. Use of this approach aids to lower the amount of excipients used to overcome physiochemical limitation of the drug substances and there side effects. Both drying and milling steps in wet granulation were not required for MADG process. MADG became a cost effective process which could lead to reduced total tablet size and also save time.