A considerable number of applications are running over IP networks. This increased the contention on the network resource, which ultimately results in congestion. Active queue management (AQM) aims to reduce the serious consequences of network congestion in the router buffer and its negative effects on network performance. AQM methods implement different techniques in accordance with congestion indicators, such as queue length and average queue length. The performance of the network is evaluated using delay, loss, and throughput. The gap between congestion indicators and network performance measurements leads to the decline in network performance. In this study, delay and loss predictions are used as congestion indicators in a novel stochastic approach for AQM. The proposed method estimates the congestion in the router buffer and then uses the indicators to calculate the dropping probability, which is responsible for managing the router buffer. The experimental results, based on two sets of experiments, have shown that the proposed method outperformed the existing benchmark algorithms including RED, ERED and BLUE algorithms. For instance, in the first experiment, the proposed method resides in the third-place in terms of delay when compared to the benchmark algorithms. In addition, the proposed method outperformed the benchmark algorithms in terms of packet loss, packet dropping, and packet retransmission. Overall, the proposed method outperformed the benchmark algorithms because it preserves packet loss while maintaining reasonable queuing delay. 相似文献
This paper presents an efficient technique for trapping of magnetic particles in confined spatial locations using customized
designs of micro-coils (MCs). Large magnetic field gradients of up to 20 T/mm and large magnetic forces in the range of 10−8 Newton on magnetic particles with diameter of 1 μm have been achieved using MCs with several planar geometrical configurations.
A large magnetic field gradient is generated and enhanced by two structural parameters: the small width and high aspect ratio
of each single conductor and the ferromagnetic pillars positioned at high-flux density locations. This arrangement creates
very steep magnetic potential wells, in particular at the vicinity of the pillars. The system allowed capturing of suspended
magnetic particles as far as 1,000 μm from the center of the device. Magnetic particles/cells have been trapped and confined
in single and in arrays of deep magnetic potential wells corresponding to the MCs configuration. 相似文献
This study aims to solve the nonlinear fractional-order mathematical model (FOMM) by using the normal and dysregulated bone remodeling of the myeloma bone disease (MBD). For the more precise performance of the model, fractional-order derivatives have been used to solve the disease model numerically. The FOMM is preliminarily designed to focus on the critical interactions between bone resorption or osteoclasts (OC) and bone formation or osteoblasts (OB). The connections of OC and OB are represented by a nonlinear differential system based on the cellular components, which depict stable fluctuation in the usual bone case and unstable fluctuation through the MBD. Untreated myeloma causes by increasing the OC and reducing the osteoblasts, resulting in net bone waste the tumor growth. The solutions of the FOMM will be provided by using the stochastic framework based on the Levenberg-Marquardt backpropagation (LVMBP) neural networks (NN), i.e., LVMBPNN. The mathematical performances of three variations of the fractional-order derivative based on the nonlinear disease model using the LVMPNN. The static structural performances are 82% for investigation and 9% for both learning and certification. The performances of the LVMBPNN are authenticated by using the results of the Adams-Bashforth-Moulton mechanism. To accomplish the capability, steadiness, accuracy, and ability of the LVMBPNN, the performances of the error histograms (EHs), mean square error (MSE), recurrence, and state transitions (STs) will be provided. 相似文献
In many cases, simple analytical models used by traditional compilers are no longer able to yield effectively optimized code
for complex programs because of the enormous complexity of processor architectures. A promising alternative approach for optimizing
applications effectively has been the use of search-based empirical methods. The success of empirically tuned library generators
such as ATLAS has shown that this strategy can be effective for domain-specific programs. However, to date there has been
no general-purpose tool for effective empirical optimization of whole programs. The main obstacle to this approach has been
the need for evaluating a prohibitively large number of alternative program variants. To address this problem, we have developed
a prototype tool for automatic application tuning that uses loop-level performance feedback and a direct search strategy to
guide search for the best set of optimization parameters. Experiments on four different architectures show that direct search
can be an effective technique for finding good values for transformation parameters in a reasonable time.
This material is based on work supported by the Department of Energy under Contract Nos. 03891-001-99-4G, 74837-001-03 49,
86192-001-04 49, and/or 12783-001-05 49 from the Los Alamos National Laboratory. 相似文献
Diabetes mellitus is a long-term condition characterized by hyperglycemia. It could lead to plenty of difficulties. According to rising morbidity in recent years, the world’s diabetic patients will exceed 642 million by 2040, implying that one out of every ten persons will be diabetic. There is no doubt that this startling figure requires immediate attention from industry and academia to promote innovation and growth in diabetes risk prediction to save individuals’ lives. Due to its rapid development, deep learning (DL) was used to predict numerous diseases. However, DL methods still suffer from their limited prediction performance due to the hyperparameters selection and parameters optimization. Therefore, the selection of hyper-parameters is critical in improving classification performance. This study presents Convolutional Neural Network (CNN) that has achieved remarkable results in many medical domains where the Bayesian optimization algorithm (BOA) has been employed for hyperparameters selection and parameters optimization. Two issues have been investigated and solved during the experiment to enhance the results. The first is the dataset class imbalance, which is solved using Synthetic Minority Oversampling Technique (SMOTE) technique. The second issue is the model's poor performance, which has been solved using the Bayesian optimization algorithm. The findings indicate that the Bayesian based-CNN model superbases all the state-of-the-art models in the literature with an accuracy of 89.36%, F1-score of 0.88.6, and Matthews Correlation Coefficient (MCC) of 0.88.6. 相似文献
This study proposes a novel design to systematically optimize the parameters for the adaptive neuro-fuzzy inference system (ANFIS) model using stochastic fractal search (SFS) algorithm. To affirm the efficiency of the proposed SFS-ANFIS model, the predicting results were compared with ANFIS and three hybrid methodologies based on ANFIS combined with genetic algorithm (GA), differential evolution (DE), and particle swarm optimization (PSO). Accurate prediction of uniaxial compressive strength (UCS) is of great significance for all geotechnical projects such as tunnels and dams. Hence, this study proposes the use of SFS-ANFIS, GA-ANFIS, DE-ANFIS, PSO-ANFIS, and ANFIS models to predict UCS. In this regard, the fresh water tunnel of Pahang–Selangor located in Malaysia was considered and the requirement data samples were collected. Different statistical metrics such as coefficient of determination (R2) and mean absolute error were used to evaluate the models. Referring to the efficiency results of SFS-ANFIS, it can be found that the SFS-ANFIS (with the R2 of 0.981) has higher ability than PSO-ANFIS, DE-ANFIS, GA-ANFIS, and ANFIS models in predicting the UCS.
Studies using peripheral pressure measurements have facilitated studies in identifying particular gain characteristics of baroreflex control loops. However, the baroreceptors are located in central regions of the arterial tree (aortic arch and carotid arteries) and are subjected to peak pressures that are different to those measured in peripheral locations (e.g., finger). The analysis presented shows that if the known transfer function properties between peripheral and central pressures are used to derive central pressure from peripheral measurements, the baroreflex gain characteristics can be calculated in terms of central aortic pressure changes. The results obtained by this method are markedly different than those calculated using peripheral pressure 相似文献
Microsystem Technologies - Nanofluid radiation in a semi permeable duct is analyzed in existence of Lorentz forces. Lorentz forces impact on energy equation are involved. Last ODEs were solved via... 相似文献