THERMAL PROCESS EVALUATION OF RETORTABLE POUCHES FILLED WITH CONDUCTION HEATED FOOD

Two models using the finite element technique (FE) and another using an analytical solution to solve the 3‐dimensional heat conduction equation for a finite plate were built. FE models were built considering the actual pouch shape and retort temperature profile. Chi‐square and regression lines were obtained for each set of temperatures generated by the models against experimental data. A mass average sterilizing value of 9.9 min was estimated when a critical point sterilizing value was at 8.7 min using the 3‐Dimensional FE model. Close agreement was found among the three models for heating phase. Using actual retort temperature profile made FE models more accurate than the one using analytical solution, especially for cooling phase.     

Correlation study between standard plate count and flow cytometry for determination of raw milk total bacterial count

Milk samples were collected in the dry season ( n =  155) and in the rainy season ( n =  68) to establish a correlation between electronic flow cytometry and standard plate count for the determination of total bacterial count of raw milk. Results were expressed in individual bacterial count (ibc) and colony forming unit (cfu) for electronic flow cytometry (Bactocount) and standard plate count, respectively. The accuracy of Bactocount, denoted by the residual standard deviation ( s ( y,x )), was 0.309 log cfu/mL. The predictive interval of estimated values was broad and it is suggested that total bacterial count should be expressed in ibc without transformation to cfu.     

The Multifunctional Sactipeptide Ruminococcin C1 Displays Potent Antibacterial Activity In Vivo as Well as Other Beneficial Properties for Human Health

The world is on the verge of a major antibiotic crisis as the emergence of resistant bacteria is increasing, and very few novel molecules have been discovered since the 1960s. In this context, scientists have been exploring alternatives to conventional antibiotics, such as ribosomally synthesized and post-translationally modified peptides (RiPPs). Interestingly, the highly potent in vitro antibacterial activity and safety of ruminococcin C1, a recently discovered RiPP belonging to the sactipeptide subclass, has been demonstrated. The present results show that ruminococcin C1 is efficient at curing infection and at protecting challenged mice from Clostridium perfringens with a lower dose than the conventional antibiotic vancomycin. Moreover, antimicrobial peptide (AMP) is also effective against this pathogen in the complex microbial community of the gut environment, with a selective impact on a few bacterial genera, while maintaining a global homeostasis of the microbiome. In addition, ruminococcin C1 exhibits other biological activities that could be beneficial for human health, as well as other fields of applications. Overall, this study, by using an in vivo infection approach, confirms the antimicrobial clinical potential and highlights the multiple functional properties of ruminococcin C1, thus extending its therapeutic interest.     

Halogenated Ti3C2 MXenes Prepared by Microwave Molten Salt for Hg0 Photo-Oxidation

Ti₃C₂ MXenes with different halogen modifications are prepared rapidly and efficiently by microwave molten salt method, and the MXene surface functional group modification is successfully achieved to address the problems of low purity, complex functional groups, and uncontrollable energy band structure of MXenes obtained by traditional liquid phase etching. Among them, the modification of the iodine (I) functional group onto the surface of Ti₃C₂ changes the energy band structure and band gap, resulting in easier photoexcitation and more photogenerated carriers. The increased Fermi energy is closer to the conduction band, the decreased surface work function weakens the electron confinement ability. The photogenerated carriers can migrate to the surface of the material more easily with extended lifetime, so the activity of the catalyst is improved. Further, for gaseous monomeric mercury (Hg⁰) photo-oxidative removal, Ti₃C₂-I₂ exhibits 85.5% efficiency of Hg⁰ photo-oxidative removal under visible light. Based on the experimental characterization and density functional theory calculations, a mechanism for the photo-oxidative removal of Hg° from Ti₃C₂-I₂ MXene is proposed, which provides a valuable strategy for studying Ti₃C₂ MXenes in the field of photocatalysis.     

Hybrid film of chemically modified graphene and vapor-phase-polymerized PEDOT for electronic nose applications

A hybrid of graphene and conducting polymer holds great potential as the active materials for high performance chemical sensor application. In this work, a thin hybrid film of reduced graphene oxide (RG-O) and poly(3,4-ethylenedioxythiophene) (PEDOT) was fabricated by means of vapor phase polymerization and explored as active material for chemical sensors. The chemical sensors based on hybrid film of RG-O and PEDOT are capable of detecting electrical signals caused by the absorption of trace levels of different analyte vapors with high sensitivity, selectivity and fast response.     

Vertically aligned carbon nanotube‐based composite: Elaboration and monitoring of the nanotubes alignment

We present the different elaboration steps of a composite formed of carbon nanotubes (CNT) carpet embedded in an epoxy polymer. Detailed characterization at each step of the elaboration process is performed. The good alignment of CNT in as‐grown carpets is kept all along the elaboration process of the composite, as it is measured at both macro and microscopic scales by X‐ray scattering. We also ensured by X‐ray fluorescence measurements that the iron‐based catalyst particles used for the synthesis were removed from the carpet after a high temperature post‐annealing treatment. These measurements give valuable information for further applications involving unidirectional nanotube composites and membranes, where CNT alignment is a key parameter. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39730.     

A Comparison of the Rough Sets and Recursive Partitioning Induction Approaches: An Application to Commercial Loans

Credit scoring is the term used to describe methods utilized for classifying applicants for credit into classes of risk. This paper evaluates two induction approaches, rough sets and decision trees, as techniques for classifying credit (business) applicants. Inductive learning methods, like rough sets and decision trees, have a better knowledge representational structure than neural networks or statistical procedures because they can be used to derive production rules. If decision trees have already been used for credit granting, the rough sets approach is rarely utilized in this domain. In this paper, we use production rules obtained on a sample of 1102 business loans in order to compare the classification abilities of the two techniques. We show that decision trees obtain better results with 87.5% of good classifications with a pruned tree, against 76.7% for rough sets. However, decision trees make more type–II errors than rough sets, but fewer type–I errors.     

Immobilized DNA aptamers as target-specific chiral stationary phases for resolution of nucleoside and amino acid derivative enantiomers

Recently, we described the use of a DNA aptamer as a new target-specific chiral stationary phase (CSP) for the separation of oligopeptide enantiomers (Michaud, M.; Jourdan, E.; Villet, A.; Ravel, A.; Grosset, C.; Peyrin, E. J. Am. Chem. Soc. 2003, 125, 8672). However, from a practical point of view, it was fundamental to extend the applicability of such target-specific aptamer CSP to the resolution of small (bioactive) molecule enantiomers. In this paper, immobilized DNA aptamers specifically selected against D-adenosine and L-tyrosinamide were used to resolve the enantiomers by HPLC, using microbore columns. At 20 degrees C, the adenosine enantioseparation was similar to that classically reported with imprinted CSPs (approximately 3.5) while a very high enantioselectivity was observed for the tyrosinamide enantiomers (the nontarget enantiomer was essentially nonretained on the CSP). The influence of temperature on solute binding and chiral discrimination was analyzed. The binding enthalpic contributions were determined from linear van't Hoff plots. Very large DeltaH values were obtained for the target enantiomers (-71.4 +/- 0.7 kJ/mol for D-adenosine and -139.4 +/- 2.0 kJ/mol for L-tyrosinamide). Such values were consistent with the formation of a tight complex between these analytes and the aptamer CSPs. This work demonstrates that target-specific aptamer CSPs constitute a powerful tool for the resolution of small (bioactive) molecule enantiomers.     

Interpretation of experimental data from rapid compression machines without creviced pistons

Over the last two decades, experimental data of the nature of species evolution profiles and ignition delays from rapid compression machines (RCMs) has been used to develop and validate chemical kinetic mechanisms at low-to-intermediate temperatures and elevated pressures. A significant portion of this overall dataset is from RCMs that had not employed a creviced piston to contain the roll-up vortex. The detrimental influence of the roll-up vortex and the thermokinetic interactions due to the resulting temperature non-homogeneity during the negative temperature coefficient (ntc) regime have been documented in the literature. However, the adequacy of the homogeneous modeling of RCMs without creviced pistons during reactive conditions has not been investigated. In this work, computational fluid dynamics simulations of an RCM without a creviced piston are conducted for autoignition of n-heptane over the entire ntc regime over a range compressed pressures from 5 to 18 bar. The results from the CFD simulations highlight the non-homogeneity of autoignition and reveal significant quantitative discrepancy in comparison to homogeneous modeling, particularly for the hot ignition delay in the ntc regime. Specifically, the roll-up vortex induced temperature non-homogeneity leads to diminution of the ntc behavior. The experimental data from RCMs without creviced piston needs to be taken with caution for quantitative validation and refinement of kinetic mechanism, particularly at conditions when ntc behavior is highly pronounced.