Advanced flaw production method for in-service inspection qualification mock-ups

One of the key issues in in-service inspection qualification is the representativeness of the defects used in qualification specimens. The best representativeness is achieved with realistic defects. However, present specimen production techniques have some significant weaknesses, such as unrealistic defects or additional alterations induced in the surrounding material. Specimens manufactured, for example, by weld implantation or with weld solidification defects always result in one or more extra weld interfaces. These interfaces can be detected by NDT. To overcome problems with the current specimens, a new defect manufacturing technique was developed. The new technique produces natural, representative defects without introducing additional weld metal or other unwanted alterations to the specimen.The new method enables artificial production of single, separate fatigue cracks by thermal loading. The method is based on a natural thermal fatigue damage mechanism and enables production of real cracks directly into the samples. Cracks are produced without welding or machining and without any preliminary surface treatment or artificial initiator such as a notch or a precrack. Single crack or a network of cracks can be induced into the base material, welded areas, HAZ, weld claddings, threaded areas, T-joints, etc. The location, orientation and size of produced cracks can be accurately controlled. Produced cracks can be used to simulate different types of service-induced cracks such as thermal fatigue, mechanical fatigue and stress corrosion cracks. It is shown that artificially produced thermal fatigue cracks correspond well with the real, service-induced cracks and overcome the problems of traditional qualification specimen manufacturing techniques.     

Influence of titanium dioxide on crystallization behavior of an ethylene–propylene copolymer

Crystallization of an ethylene–propylene copolymer (E/P) filled with diverse weight percentages of titanium dioxide (TiO₂) was performed under isothermal and nonisothermal conditions to investigate the influence of the inorganic substance on the nucleation and growth mechanisms of the matrix. The overall and radial crystallization rates of the composite materials were measured using, respectively, differential scanning calorimetry (DSC) and optical microscopy. The nucleation density of E/P spherulites as a function of composition was investigated by scanning electron microscopy (SEM), revealing a nucleating effect of TiO₂. A comparison between the spherulitic texture of specimens showed a higher fineness of the composites relative to the neat matrix, whereas no changes of surface nucleation density were appreciable among composites within the explored compositional range. The thermal behavior is discussed in the light of the enhanced thermal conductivity of polymer composites, which conciliates the crystallization kinetics of the matrix, analyzed using the Avrami equation, to optical and SEM observations. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3409–3416, 2003     

The effects of paints and moisture content on the indoor air emissions from pinewood (Pinus sylvestris) boards

The emissions of volatile organic compounds (VOCs) from building materials may significantly contribute to indoor air pollution, and VOCs have been associated with odor annoyance and adverse health effects. Wood materials together with coatings are commonly used indoors for furniture and large surfaces such as walls, floors, and ceilings. This leads to high surface-to-volume ratios, and therefore, these materials may participate remarkably to the VOC levels of indoor environment. We studied emissions of VOCs and carbonyl compounds from pinewood (Pinus sylvestris) boards of 10% and 16% moisture contents (MC) with three paints using small-scale test chambers (27 L). The emissions from uncoated pinewood and paints (on a glass substrate) were tested as references. The 28-day experiment showed that the VOC emissions from uncoated pinewood were lower from sample with 16% MC. Painted pinewood samples showed lower emissions compared to paints on glass substrate. Additionally, paints on 16% MC pinewood exhibited lower emissions than on drier 10% MC wood. The emissions from painted pinewood samples were dominated by paint-based compounds, but the share of wood-based compounds increased over time. However, we noticed differences between the paints, and wood-based emissions were clearly higher with the most permeable paint.     

Antioxidant activity of phenolic and phenylethanoid glycosides from Teucrium polium L

In the present study, the chemical composition and antioxidant activities of Teucrium polium L. (Lamiaceae) were assessed. Fractionation of methanol extract obtained from the aerial parts of T. polium yielded one new phenylethanoid glycoside, named poliumoside B, together with four known flavonoids, two iridoid glycosides and a known poliumoside. The structures of all of these compounds were elucidated on the basis of spectroscopic data from 1D and 2D NMR experiments and MS spectral analyses. The antioxidant activities of the crude extracts and of the isolated compounds were evaluated through tests such as DPPH radical-scavenging capability, reducing power, xanthine oxidase inhibitory effect and inhibition of linoleic acid peroxidation. The highest antioxidant activity was found in the n-butanol extract, which also contained active polyphenols, thus suggesting that this plant could be used as a source of natural molecules, to provide safe antioxidant additives and nutraceuticals. The structure–activity relationships of the isolated compounds are also discussed.     

A mathematical method to estimate the equilibrium melting temperature from growth rate data

The regime transitions analysis is subject to all the limitations of the ordinary least squares method which is generally applied to the linearized form of the Lauritzen-Hoffman equation. Therefore, polymers growth rate has to be measured in a sufficiently wide temperature range to ensure a reliable kinetic analysis based on the secondary nucleation theory. Furthermore, an accurate value of the equilibrium melting temperature has to be used in order to achieve trustworthy thermodynamics outcomes, although this quantity may be affected by a high uncertainty. Here a method is proposed in order to verify directly from growth rate data the use of the most reliable value of the equilibrium melting temperature. The method is based on the comparison between the derivatives of the growth rate functions calculated by the Lauritzen-Hoffman equation using the outcomes of the regime analysis.     

Chemical composition and antioxidative activity of Moldavian balm (Dracocephalum moldavica L.) extracts

Moldavian balm (Dracocephalum moldavica L., Lamiaceae) is a perennial herb native to central Asia and naturalized in eastern and central Europe. It is commonly consumed as a food-related product and as a herbal preparation because of its reputed medicinal properties. Despite its importance, few reports exist in the literature regarding the chemistry or antioxidant activity of this species. In this study, the aerial material of Moldavian balm collected from Iran was extracted by Soxhlet using seven solvents of different polarity, viz., petroleum ether, dichloromethane, acetonitrile, ethyl acetate, methanol, n-butanol and water. The qualitative-quantitative chemical composition of each extract was determined using high-performance liquid chromatography coupled to photodiode array detection. For each extract, the total phenolic content was estimated as was the in vitro antioxidant activity using the iron(III) reduction assay, the β-carotene-linoleic acid bleaching assay and the 1,1-diphenyl-2-picrylhydrazyl and 2,2′-azinobis(3-ethylbenzothiazoline-6-sulphonate) free radical scavenging assays. Hydroxylated cinnamic acids, their derivatives and flavonoids were identified and quantified within the extracts, with rosmarinic acid being the most abundant component identified. The extracts demonstrated different degrees of potency within each assay, however, the observed pattern was not necessarily replicated between assays indicating the importance of the use of more than one screening technique to estimate the antioxidant activity of plant extracts.     

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and wheat straw fibre composites: thermal, mechanical properties and biodegradation behaviour

The thermal and mechanical behaviour of a biotechnological polyester (poly(3-hydroxybutyrate-co-hydroxyvalerate) (PHBV) reinforced with wheat straw fibres has been investigated. In order to improve chemico-physical interactions between the components, the reinforcing agent has been previously submitted to a treatment with high temperature steam leading to fibres richer in cellulose and more reactive. The addition of straw fibres has been found to increase the rate of PHBV crystallisation, while it does not affect the crystallinity content. Furthermore, the comparison of the mechanical properties has shown that the composites exhibit higher Young moduli and lower values of both the stress (_B) and strain (_B) to break than the neat matrix of PHBV. The biodegradability in different environments by means of short and long term tests has been studied. It has been observed that the presence of straw does not affect biodegradation rate evaluated in liquid environment and in long term soil burial tests. In the composting simulation test the rate of biodegradation is reduced for composites with more than 10% of straw content. The morphology of the composites has also been investigated and correlated to the biodegradation process.     

Chemical composition and in vitro antioxidative activity of a lemon balm (Melissa officinalis L.) extract

The leaf material of lemon balm (Melissa officinalis L.) was extracted with 450 ml/l aqueous ethanol by medium pressure liquid-solid extraction. The total phenolic content of the extract was estimated as gallic acid equivalents by Folin-Ciocalteu reagent method and a qualitative-quantitative compositional analysis was carried out using high performance liquid chromatography coupled with photodiode array detection. The lemon balm extract contained hydroxycinnamic acid derivatives and flavonoids with caffeic acid, m-coumaric acid, eriodictyol-7-O-glucoside, naringin, hesperidin, rosmarinic acid, naringenin, hesperetin being identified based on their chromatographic behaviour and spectral characteristics. The extract was also investigated for potential in vitro antioxidant properties in iron(III) reduction, iron(II) chelation, 1,1-diphenyl-2-picrylhydrazyl, 2,2′-azinobis(3-ethylbenzothiazoline-6-sulphonate), superoxide anion and nitric oxide free-radical scavenging, and inhibition of β-carotene-linoleic acid bleaching assays. The extract demonstrated antioxidant activity in all the assays. However, it was not as potent as the positive controls except in the β-carotene-linoleic acid bleaching assay, where its activity was superior to that of gallic and caffeic acids and statistically indistinguishable from quercetin and BHA. The exceptionally high antioxidant activity and the fact that this assay is of biological relevance warrants further investigation of lemon balm extract in ex vivo and in vivo models of oxidative stress.     

Emissions of DEHP‐free PVC flooring

Degrading 2‐ethylhexyl‐containing PVC floorings (eg DEHP‐PVC floorings) and adhesives emit 2‐ethylhexanol (2‐EH) in the indoor air. The danger of flooring degradation comes from exposing occupants to harmful phthalates plasticisers (eg DEHP), but not from 2‐EH as such. Since the EU banned the use of phthalates in sensitive applications, the market is shifting to use DEHP‐free and alternative types of plasticisers in PVC products. However, data on emissions from DEHP‐free PVC floorings are scarce. This study aimed at assessing the surface and bulk emissions of two DEHP‐free PVC floorings over three years. The floorings were glued on the screed layer of concrete casts at 75%, 85%, and 95% RH. The volatile organic compounds (VOCs) were actively sampled using FLEC (surface emissions) and micro‐chamber/thermal extractor (µ‐CTE, bulk emissions) onto Tenax TA adsorbents and analyzed with TD‐GC‐MS. 2‐EH, C9‐alcohols, and total volatile organic compound (TVOC) emissions are reported. Emissions at 75% and 85% RH were similar. As expected, the highest emissions occurred at 95% RH. 2‐EH emissions originated from the adhesive. Because the two DEHP‐free floorings tested emitted C9‐alcohols at all tested RH, it makes the detection of flooring degradation harder, particularly if the adhesive used does not emit 2‐EH.