The effect of floor slope on sub-maximal lifting capacity and technique

Inclined surfaces, where both the lifter and load are on the slope, may be encountered in a jobsite situation. The purpose of this study was to determine if facing up or down a sloped surface (10 degrees and 20 degrees ) would affect maximal acceptable weights of lift (MAWL) using a 10 min psychophysical approach with symmetric freestyle technique at 4 lifts/min. Seventeen healthy men and 18 women determined floor to knuckle height MAWL while facing uphill, downhill, and on a level surface. Motion capture was also performed to examine sagittal plane joint angles and foot placement relative to a milk crate. Slope did not alter MAWL (p>0.05) with the men lifting more than the women in every condition (p<0.001) (25 kg vs. 15 kg, respectively). Foot placement relative to the box was altered by slope such that both horizontal position behind and vertical position below the box increased as slope changed from the downhill to uphill conditions (both p<0.001). Forward torso lean as well as hip, knee, and ankle (plantar) flexion generally decreased as slope changed from the downhill to uphill conditions (all p<0.001). Torso and knee motion appeared to be protected compared to the other joints, changing the least. Though trends were the same in both sexes, interactions did exist in vertical foot position and hip angle (both p0.001). In conclusion, the body is highly adaptive to floor slope, maintaining MAWL at least in the short term. However, while slight technique differences exist between men and women, care should be taken by all when facing uphill due to the tendency to stand further from the load horizontally and when facing downhill due to increased torso lean.     

3D Semantic Scene Completion: A Survey

International Journal of Computer Vision - Semantic scene completion (SSC) aims to jointly estimate the complete geometry and semantics of a scene, assuming partial sparse input. In the last years...     

A critical discussion on rebar electrical continuity and usual interpretation thresholds in the field of half-cell potential measurements in steel reinforced concrete

Corrosion of steel in reinforced concrete structures is a recurrent problem affecting civil engineering structures and costing the world billions of dollars per year. This physical phenomenon mainly results from chloride ingress or concrete carbonation. Corrosion can be diagnosed through a nondestructive method such as half-cell potential measurements. The present paper studies this method on a reinforced concrete wall containing eighteen unconnected steel bars and subjected to chloride-induced macrocell corrosion. Three corrosion systems with different configurations of connections between the steel bars are generated, involving three different anode-to-cathode surface ratios. Then, half-cell potential variations are observed versus macrocell corrosion current. The results lead to a critical discussion regarding the physical relevance of the usual potential threshold method to detect corroding rebars in reinforced concrete structures. In addition, the experiments demonstrate that electrical continuity between reinforcing steel bars is not necessary to get meaningful information about the macrocell corrosion system. At last, the paper show that the electric field (potential gradient) relative to a macrocell corrosion system may be measured by connecting the measurement system (reference electrode?+?voltmeter) to any electrochemical system in electrolytic contact with the concrete.     

Next generation session management for 3D teleimmersive interactive environments

In the recent past we have seen a boom of distributed interactive multimedia environments which use multiple correlated media sensors, multi-view displays, and advanced haptic-audio-visual user interfaces for teleimmersive gaming, business meetings and other collaborative activities. However, when we investigate the emerging teleimmersive environments closer, we realize that their overall session management, including end-to-end session setup, establishment and run-time management are not appropriate for the new demands that these environments present. These environments are cyber-physical rooms that demand (a) large scale of multi-sensory devices across geographically-distributed locations and (b) interaction with each other in synchronous and real-time manner. To deal with the new teleimmersive demands, we present a new session management design with (a) session initiation protocol(s) that understand media correlations, (b) view-based multi-stream topology establishment among multiple parties, (c) efficient, light-weight and distributed session monitoring with querying and debugging capabilities, (d) flexible view-based session adaptation with efficient topology adjustments, and (e) light-weighted and consistent session tear-down protocols. The presented design of the next generation session management protocols, services, algorithms and data structures is based on our extensive experiences with building 3D teleimmersive interactive systems, experimenting with high impact teleimmersive applications and deploying such environments at various venues.     

The Covering Law Model Applied to Dynamical Cognitive Science: A Comment on Joel Walmsley

In a 2008 paper, Walmsley argued that the explanations employed in the dynamical approach to cognitive science, as exemplified by the Haken, Kelso and Bunz model of rhythmic finger movement, and the model of infant preservative reaching developed by Esther Thelen and her colleagues, conform to Carl Hempel and Paul Oppenheim’s deductive-nomological model of explanation (also known as the covering law model). Although we think Walmsley’s approach is methodologically sound in that it starts with an analysis of scientific practice rather than a general philosophical framework, we nevertheless feel that there are two problems with his paper. First, he focuses only on the deductivenomological model and so neglects the important fact that explanations are causal. Second, the explanations offered by the dynamical approach do not take the deductive-nomological format, because they do not deduce the explananda from exceptionless laws. Because of these two points, Walmsley makes the dynamical explanations in cognitive science appear problematic, while in fact they are not.     

A finite macro-element for corroded reinforced concrete

This paper proposes a model of the mechanical behaviour of corroded reinforced concrete members subjected to bending under service load. The model is based on the formulation of a macro-element to be used in FEM analysis, having a length equal to the distance between two consecutive flexural cracks and a cross-section equal to the member cross-section. The mechanical formulation is directly written in generalized variables (bending moment and curvature) and is based on the concept of the transfer length necessary for the transmission of tensile load from re-bar to tensile concrete thanks to the bond. It is thus possible to take into account the effect of reinforcement corrosion on the bond between re-bar and concrete, by increasing the transfer length versus intensity of corrosion. The variation of the transfer length versus corrosion is expressed using a scalar damage parameter. A first experimental validation is performed on a 17-year-old beam kept in a chloride environment under its service load.     

CD73 Overexpression in Podocytes: A Novel Marker of Podocyte Injury in Human Kidney Disease

The CD73 pathway is an important anti-inflammatory mechanism in various disease settings. Observations in mouse models suggested that CD73 might have a protective role in kidney damage; however, no direct evidence of its role in human kidney disease has been described to date. Here, we hypothesized that podocyte injury in human kidney diseases alters CD73 expression that may facilitate the diagnosis of podocytopathies. We assessed the expression of CD73 and one of its functionally important targets, the C-C chemokine receptor type 2 (CCR2), in podocytes from kidney biopsies of 39 patients with podocytopathy (including focal segmental glomerulosclerosis (FSGS), minimal change disease (MCD), membranous glomerulonephritis (MGN) and amyloidosis) and a control group. Podocyte CD73 expression in each of the disease groups was significantly increased in comparison to controls (p < 0.001–p < 0.0001). Moreover, there was a marked negative correlation between CD73 and CCR2 expression, as confirmed by immunohistochemistry and immunofluorescence (Pearson r = −0.5068, p = 0.0031; Pearson r = −0.4705, p = 0.0313, respectively), thus suggesting a protective role of CD73 in kidney injury. Finally, we identify CD73 as a novel potential diagnostic marker of human podocytopathies, particularly of MCD that has been notorious for the lack of pathological features recognizable by light microscopy and immunohistochemistry.     

The validity and reliability of a portable slip meter for determining floor slipperiness during simulated heel strike

A previously developed test rig was used as starting point for designing a portable slip meter with two new features. First, an inflatable pneumatic test wheel, consisting of six slider units, was introduced as the impacting contact element relative to floor surface. Second, an inductive trigger was built into the system to facilitate a precise timing of the slider-floor contact during the test. This new test rig was designed to measure transitional friction properties of contaminated floor surfaces during simulated heel strike, which is considered the most critical phase of gait from the slip and fall point of view. Another objective was to quantify the validity and reliability of this test method in the laboratory, but not yet in the field. The measurement process was evaluated on eight wet and oily floor surfaces (vinyl and ceramic tile floorings) using two slider materials (plain, profiled), two normal loads (100, 200 N), and two sliding velocities (0.15, 0.30 m/s) as independent variables. The outputs of the portable slip meter, in terms of transitional friction coefficients, were compared to force platform-based friction values and to slip resistance values obtained with a slip simulator apparatus for laboratory testing of shoes and floor surfaces. The outputs were also evaluated against slipperiness ratings made by three male subjects in paired comparison trials, in which the subjects walked over eight wet floor surfaces wearing shoes with the plain soling material. The results showed that test option 200 N and 0.15m/s led to optimum validity despite its tendency to promote frictional vibrations (stick-slip) in the contact surface. Compared to the lower sliding speed, the higher speed reduced both stick-slip and measurement bias. Test option 200 N and 0.30 m/s was the most reliable one in this experiment. It yielded lower friction coefficients than any other test option and reduced the likelihood of underestimating slip and fall hazards. The results implied that the minimum friction coefficient was 0.25 for preventing a fall on wet floor surfaces, whereas the limit for preventing a slip was in the range 0.30-0.35. Transitional friction measurement was found to be a valid and reliable indicator for slip resistance. A more accurate control of the normal force during testing is needed for actual field use of the test method.