Identification of vivianite,an unusual blue pigment,in a sixteenth century painting and its implications

Vivianite, a blue pigment employed in the past practically only in Northern and Central Europe, but with very limited use, was identified in an early sixteenth century painting, stylistically with Flemish features, from a church in Portugal. The identification of this iron phosphate mineral was made by SEM‐EDS based on the atomic ratio between phosphorus and iron in layers of blue paint (area analysis) and in particles of these same layers (spot analysis). This painting, about which there is no document to prove its authorship, becomes the first case, known in detail, of a sixteenth century painting containing vivianite. Moreover, this find and the presence of a chalk ground, also identified, strongly support the hypothesis of being a Flemish painting.     

Coupling GIS with Hydrologic and Hydraulic Flood Modelling

Geographic Information Systems (GIS) have been recognised as a powerful means to integrate and analyse data from various sources in the context of comprehensive floodplain management. As part of this comprehensive approach to floodplain management, it is very important to be able to predict the consequences of different scenarios in terms of flooded areas and associated risk. Hydrologic and hydraulic modelling plays a crucial role and there is much to gain in incorporating these modelling capabilities in GIS. This is still a rather complex task and research is being done on the full integration of these models. Interfacing between these models and GIS may be a very efficient way of overcoming the difficulties and getting very good results in terms of engineering practice. This paper presents results based on the use of Intergraph GIS coupled with Idrisi GIS. Using these two systems substantially increased the flexibility of using GIS as a tool for flood studies. A lumped (XSRAIN) and a distributed (OMEGA) hydrologic models were used to simulate flood hydrographs. The well known HEC-2 Hydraulic model was used to compute flooded areas. These models were applied in the Livramento catchment with very good results. The computation of flooded areas for different flood scenarios, and its representation in GIS, can be used in the assessment of affected property and associated damages. This is a very useful GIS-based approach to floodplain management.     

High performance software testing on SIMD machines

A method for high-performance, software testing, called mutant unification, is described. The method is designed to support program mutation on parallel machines based on the single instruction multiple data stream (SIMD) paradigm. Several parameters that affect the performance of unification have been identified and their effect on the time to completion of a mutation test cycle and speedup has been studied. Program mutation analysis provides an effective means for determining the reliability of large software systems and a systematic method for measuring the adequacy of test data. However, it is likely that testing large software systems using mutation is computation bound and prohibitive on traditional sequential machines. Current, implementations of mutation tools are unacceptably slow and are only suitable for testing relatively small programs. The proposed unification method provides a practical alternative to the current approaches. The method also opens up a new application domain for SIMD machines     

Signals,timers, and continuations for multithreaded user‐level protocols

Precise timing and asynchronous I/O are appealing features for many applications. Unix kernels provide such features on a per‐process basis, using signals to communicate asynchronous events to applications. Per‐process signals and timers are grossly inadequate for complex multithreaded applications that require per‐thread signals and timers that operate at finer granularity. To respond to this need, we present a scheme that integrates asynchronous (Unix) signals with user‐level threads, using the ARIADNE system as a platform. This is done with a view towards support for portable, multithreaded, and multiprotocol distributed applications, namely the CLAM (connectionless, lightweight, and multiway) communications library. In the same context, we propose the use of continuations as an efficient mechanism for reducing thread context‐switching and busy‐wait overheads in multithreaded protocols. Our proposal for integrating timers and signal‐handling mechanisms not only solves problems related to race conditions, but also offers an efficient and flexible interface for timing and signalling threads. Copyright © 2006 John Wiley & Sons, Ltd.     

Radical styrene polymerization in the presence of trace levels of sulfonic acids

The bulk polymerization of styrene in the presence of the vinyl functional sulfonic acid 2‐sulfoethylmethacrylate (SEM) was found to have utility for making polystyrenes with narrow polydispersity, bimodal polydispersity, and ultrahigh molecular weight at fast polymerization rates. Narrow polydispersity polymers were made by the addition of SEM to nitroxide‐mediated polymerizations. Bimodal polydispersity polymers were made by the ultrahigh molecular weight component being made in the presence of SEM in the absence of an initiator and the low molecular weight component being made in the presence of an initiator and/or chain‐transfer agent. Ultrahigh molecular weight monomodal polystyrenes were prepared at much faster polymerization rates than possible via spontaneous polymerization in the absence of SEM. SEM was found to be more effective, by an order of magnitude, than camphor sulfonic acid on a weight basis and, because it is copolymerized into the polymer chain, should not lead to corrosion problems during fabrication of the polymer. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 87: 869–875, 2003     

Coupled temperature and moisture effects on the tensile behavior of strain hardening cementitious composites (SHCC) reinforced with PVA fibers

This paper reports the experimental findings on the tensile behavior of strain-hardening cement-based composites (SHCC). The composites were subjected to the combined effects of elevated temperatures and internal moisture condition. Uniaxial tensile tests on dumbbell-shaped SHCC specimens with in situ temperature control were performed at 22, 60 and 100 °C. In addition, the effect of the internal humidity of SHCC (95, 50, 20 and 0%) coupled to the elevated temperatures was investigated. It was shown that the tensile strength decreases and the strain capacity increases with an increase in temperature. The influence of the internal moisture conditions was more significant in high temperatures. The strain capacity reduced significantly with a decrease in the humidity level. The crack pattern of the SHCC specimens was determined. Furthermore, single fiber pullout tests were performed under the considered high temperatures condition. Finally, the results are discussed based on the thermogravimetry analysis of the PVA fiber, alterations on its microstructure and surface coating.     

Hematopoietic progenitor constituents and adherent cell progenitor morphology isolated from black-rumped agouti (Dasyprocta prymnolopha, Wagler 1831) bone marrow

Stem cells are present in the adult tissues of most diverse species. Bone marrow is recognized to be the most exploited site to obtain stem cells and cell progenitors. The objective of the present study was to characterize hematopoietic progenitor (HP) morphology and analyze the performance of adherent cell progenitors (ACPs) cultivated in vitro from black‐rumped agouti bone marrow (Dasyprocta prymnolopha). Bone marrow aspirates were obtained from tibia crest and used to prepare histological slides and identify cell morphology. Cells were also scattered on culture plates for later isolation, expansion, and quantification. Smears obtained from bone marrow demonstrated HPs at different stages of maturity. In culture, these cells showed fibroblastoid morphology and a strong tendency to form colonies, demonstrated by the presence of cell aggregates, cytoplasmic elongations lying side by side. An 80% cell confluence was observed at 18 days in culture and progressive reduction in the percentage of nonadherent mononuclear cells. After eight passes, a mean cell viability of 96.07% was observed, from a pool of 1.6 × 10⁷ cells (ACP). Thirteen 25‐cm² culture bottles were trypsinized, resuspended in freezing medium, stored in 14 criotubes at a concentration of 1 × 10⁶ cells per milliliter, and placed in liquid nitrogen at ?196°C. Agouti bone marrow demonstrated high plasticity, moreover different HP lines, and a population of adherent cells demonstrated morphology similar to mesenchymal stem cells in culture. Microsc. Res. Tech. 2012. © 2012 Wiley Periodicals, Inc.     

Evaluation of Porous Structure of Cement Pastes Made with Residual Rice Husk Ash

In several countries, the residual RHA （rice husk ash） has been produced in rice processing industries or in thermoelectric plants that use rice husk to generate heat and/or electrical energy, usually without burning process control. This causes a reduction in the amorphous silica content of residual RHA, which distinguishes them from the RHA produced according to controlled burning process, which is totally amorphous and considered a highly reactive pozzolan. In this paper, the hydration products and the porous structure of binders paste were studied by replacing, in weight of 5%, 10% and 20% of Portland cement OPC （ordinary Portland cement）, by residual RHAs named A and B, which have high and low content of amorphous silica, respectively, using microstructure evaluation techniques as XRD （X-ray diffraction）, TG （thermogravimetric） tests and MIP （mercury intrusion porosimetry）. A reducing the size of the pores of the pastes was observed according to the increase of content replacement of RHA A and RHA B.     

Do the opportunities for learning and personal development lead to happiness? It depends on work-family conciliation.

The study shows how the perceptions of opportunities for learning and personal development predict five dimensions of affective well-being (AWB: pleasure, comfort, placidity, enthusiasm, and vigor), and how this relationship is moderated by the perceptions of work-family conciliation. A sample comprising 404 individuals was collected. The findings show the following: (1) both the perceptions of opportunities for learning and personal development and perceptions of work-family conciliation predict AWB, the happier individuals being those who have high perceptions on both variables; (2) both variables interact in predicting AWB, in such a way that perceptions of high opportunities for learning and personal development may not lead to higher AWB if work-family conciliation is low. Post hoc analysis also suggests that the relationship between the perceptions of opportunities for learning and personal development and AWB tends to be nonlinear for individuals with perceptions of low work-family conciliation. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Partial oxidation of methane over bimetallic nickel–lanthanide oxides

The study of partial oxidation of methane (POM) over bimetallic nickel–lanthanide oxides was undertaken. Binary intermetallic compounds of the type LnNi (Ln = Pr, Gd, Lu) were used as bimetallic nickel–lanthanide oxides precursors and the products (NiO·Pr₂NiO₄, 2NiO·Gd₂O₃ and 2NiO·Lu₂O₃) were characterized by means of X-ray diffraction, X-ray photoelectron spectroscopy, Raman and temperature programmed reduction. The catalytic activity increases when gadolinium or lutetium replaces praseodymium and the selectivity of the bimetallic nickel–lanthanide oxides is clearly different from that of single metal oxides and/or mechanical mixtures.The existence of an unusual synergism effect between the two metal oxide phases (NiO and Ln₂O₃) that lead to higher conversions of methane and higher selectivities to hydrogen and carbon monoxide correlate also the catalysts stability to deactivation. The activity and selectivity of the gadolinium and lutetium compounds is, under the same conditions, equivalent to that of a platinum commercial catalyst, 5 wt% Pt/Al₂O₃, which stresses the good catalytic performance of this new type of compounds for the production of H₂ and CO (H₂/CO = 2).