Progress in deep-UV photoresists

Higher resolution can be achieved in lithography by decreasing the wavelength of the exposure source. However, resist material and their processing are also important when we move to a shorter wavelength lithography technology. This paper reviews the recent development and challenges of deep-UV photoresists and their processing technology.     

PCAAD—an object-oriented expert system for assembly of printed circuit boards

Abstract: Electronics manufacturing is the fastest growing segment of the manufacturing domain today. The rapid change in printed circuit board manufacturing has been possible with the induction of surface-mounted components and robotic assembly. The high density packaging capability of surface-mounted technology has contributed enormously to the development of new trends in printed circuit board manufacturing.
PCAAD—Printed Circuit Board Assembly Advisor—is an expert system developed to capture this new technology and its interaction with the existing through-hole-mounting technology. In building the system, rules and guidelines pertaining to assembly are formulated and incorporated into the knowledge-base. The system is built on an object-oriented paradigm. The object-oriented approach, Smalltalk-80, the object-oriented language and the hierarchical rule structure paradigm are briefly discussed. A rating system is also introduced to rank various assembly designs. PCAAD can advise whether or not to proceed with assembly with a particular assembly design, and suggests assembly modification at the early stage of design to eliminate the assembly problems in the later phase of board production.     

Psychotic depression. An atypical initial presentation of multiple sclerosis

The Roussy-Lévy syndrome (MIM #180800) was described in 1926 as a disorder presenting with pes cavus and tendon areflexia, distal limb weakness, tremor in the upper limbs, gait ataxia and distal sensory loss. We report a family with affected members in four generations, showing these clinical signs of Roussy-Lévy syndrome and a partial duplication at chromosome 17p11.2. This genetic defect is commonly found in patients with the hypertrophic form of the Charcot-Marie-Tooth syndrome. Our finding provides evidence against the Roussy-Lévy syndrome as a distinct entity but suggests a close relation with the Charcot-Marie-Tooth syndrome. What causes the additional features of gait ataxia and essential tremor needs further clarification.     

Green laser sources optimized for highly efficient microdisplay‐based field‐sequential mobile projectors

Abstract— A novel green laser source, based on a monolithic cavity microchip laser platform, has been developed. The laser is designed to be a part of a miniature and efficient RGB light source for microdisplay‐based mobile projector devices. The use of highly efficient, periodically poled MgO‐doped lithium niobate as the non‐linear frequency doubler allows for a significant increase in the overall efficiency of the green microchip laser. Specifically, a 50–150‐mW green output with a wall‐plug efficiency exceeding 10% in the temperature range of greater than 40°C has been demonstrated. A compact package for this laser source with a volume less than 0.33 cm³ is discussed and results of performance tests are presented.     

Mitigation of ammonia-induced SCC in a cupronickel alloy by additions of MgCl<Subscript>2</Subscript>

The work presented in Part 1 of this article showed that additions of magnesium chloride (MgCl₂) to ammonia solutions reduced the tendency of ammonia-induced stress-corrosion cracking (SCC) initiation in a Cu-5%Ni alloy. The present work was undertaken to study the SCC behavior of the test alloy exposed to ammonia in the presence of varying concentrations of MgCl₂. The exposure to MgCl₂ additions reduced the severity of the ammonia-induced SCC.     

Biomass production and small-scale testing of freeze-dried lactic acid bacteria starter strains for cassava fermentations

Based on their predominance in Gari fermentations, as well as suitable technological properties, Lactobacillus plantarum, Lactobacillus fermentum, Weissella paramesenteroides and Leuconostoc mesenteroides strains were investigated for their suitability for development as starter strains for this African traditional fermented cassava product. The strains were grown in optimized growth media in 2 L fermenters, harvested and freeze dried, and then tested in lab-scale cassava mash fermentation trials for their ability to ferment the cassava. The strains performed well and rapidly increased the titratable acidity from 1.1 to 1.3% at 24 h to 1.3–1.6% at 48 h. The benefit of including starter cultures was that it lowered the pH of the product much faster and to lower levels than in the uninoculated control fermentation. The results furthermore indicated that especially the L. plantarum-group strains could be produced as starter strains at low cost. Overall, the results of this study showed that starter strains could be easily and economically produced, and thus represent a feasible possibility for further development for application in the field.     

Flexibility performance: Taguchi's method study of physical system and operating control parameters of FMS

In present manufacturing environment, the manufacturing flexibility has become one of the strategic competitive tools. Flexibility refers to the availability of alternative resources. These resources may have varied parameters, particularly related to physical and operating system. These physical and operating parameters of alternative resources may influence the system's performance with the changing levels of flexibility and operational control parameters such as scheduling rules. Is increase in a flexibility level provides desired improved performance output? If yes, than under what conditions of physical and operating parameters and under which control strategy (CS)? Is improved performance is present at all increasing levels of flexibility? Flexible manufacturing system (FMS) being consist of numerous physical and operating parameters and complex in nature, the solution to these questions can provide an understanding of the productive levels of flexibility for a given physical and operating parameters of an FMS. This paper establishes the need of modelling of the physical and operating parameters of flexible manufacturing system along with flexibility and presents a simulation study under Taguchi's method analysis of these parameters. The paper contributes an approach to study the impact of variations in physical and operating parameters of an FMS and to identify the level of these variations that do not restrict the advantages of flexibility. The results show that the expected benefits from increasing the levels of flexibility and a superior CS may not be achieved if the physical and operating parameters of alternative machines have variations. Taguchi's method analysis indicates that relative percentage contribution of variations in physical and operating parameters of alternative resources should be negligible or minimum in the performance of FMS. Their increasing relative contribution may restrict the advantages of flexibility. If these variations are higher than increase in flexibility level may be counter productive.     

Stress and reproduction: Introduction to the Special Section.

This special section on stress and reproduction is devoted to an emerging frontier in interdisciplinary research that merits the attention of health psychologists. The majority of the studies concern the role of stress and emotion on birth outcomes such as low birth weight, fetal growth and preterm delivery, or mechanisms underlying these findings. The implications of this research extend from maternal and infant health to life-span development and adult health and mortality. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Applicability of X-ray reflectometry to studies of polymer solar cell degradation

Although degradation of polymer solar cells is widely acknowledged, the cause, physical or chemical, has not been identified. The purpose of this work is to determine the applicability of X-ray reflectometry for in situ observation of physical degradation mechanisms. We find that the rough interfaces of the polymer solar cell constituent layers seriously obstruct the sensitivity of the technique, rendering it impossible to elucidate changes in the layer/interface structure at the sub-nanometer level.