Investigation of wetting behaviour of hardenable copper based-alloys for brazing applications

ABSTRACT

Tools for machining are exposed to high loads, wear, and elevated temperatures. Commonly, such tools consist of cemented carbides and tool steel. To combine the advantages of both materials, high-quality-joints with high strengths are desired. When brazing these materials, the main challenge is the mismatch of the Coefficient of Thermal Expansion (CTE) and the poor wettability of cemented carbides by molten filler alloys. In this regard, the feasibility of two custom-made alloys (CuNi12Si5, CuNi12Si5B0.4) was analysed. Besides being a cost-efficient alternative, these alloys offer the possibility to modify their mechanical properties by precipitation hardening to reduce stresses within the final joints. Thus, this paper shows that a temperature of 1060°C is suitable for wetting and brazing tests on different substrates.     

Some opportunities and challenges of producing bio-composites from non-wood residues

Plant-based composites (bio-composites) may in the future, become materials to replace polymer based composites and wood in terms of their attractive specific properties, lower cost, simple processing technologies, eco-friendliness, and ability to be recycled after use. The quality and performance of plant fibre-based composites can further be improved by adopting appropriate engineering techniques. Although plant-based fibres have these advantages, they also have some limitations. One of the serious problems of plant fibres is their strong polar character, which creates many problems of incompatibility with most thermosetting and thermoplastic matrices. Production of bio-composites with high quality and performance is therefore based on adjusting the properties of the constituents to meet the requirements of the composite material i.e. a product with consistent, uniform, predictable, and reproducible properties. Such adjustments involve creating strong interfacial bonds between the lignocellulosic substrates and the binder. Successful development of bio-composites therefore stem from a careful understanding of the influence of these adjustments on the composite properties. This paper suggests some opportunities available in producing bio-composites from non-wood resources, and the challenges that must be overcome to make this technology commercially viable. Gaps in knowledge and information required before full commercialisation of these materials are identified.     

Ignitability of decomposed transformer fluids

The effects of an electrical field (12 KV/cm) and elevated temperature (300°C) on the ignition potential of transformer fluids, which are candidate replacements for polychlorinated biphenyls (PCBs), have been studied. The combined results indicate that the chemical composition of the fluids were alerted, often in such a manner as to increase the ease of ignition. Exploratory Fire Research Center for Fire Research national Bureau of Standards     

Hypomagnesemia as a predictor of mortality in hemodialysis patients and the role of proton pump inhibitors: A cross‐sectional, 1‐year,retrospective cohort study

Introduction This study aimed to evaluate the association between proton pump inhibitor (PPI) use and serum magnesium levels, and the role of hypomagnesemia and PPI use as a risk factor for mortality in hemodialysis patients. Methods An observational study, including a cross‐sectional and 1‐year retrospective cohort study. The study comprised 399 hemodialysis patients at a single center, and was conducted from January to September 2014. Multiple linear regression analysis was used to investigate the independent relationship between serum magnesium levels and baseline demographic and clinical variables, including PPI and histamine‐2 receptor antagonist use. Cox regression model was used to identify lower serum magnesium level and PPI as a predictor of 1‐year mortality. Findings Serum magnesium levels were lower with PPI use than non‐PPI use (2.39 ± 0.36 vs. 2.56 ± 0.39 mg/dL, P < 0.001). Multiple linear regression analysis showed that PPI use, low serum albumin levels, and low serum potassium and high‐sensitivity C‐reactive protein (hs‐CRP) levels were significantly associated with low serum magnesium levels. A total of 29 deaths occurred during the follow‐up period. According to Cox regression analysis stratified by hs‐CRP, only high serum hs‐CRP levels (>4.04 mg/L) in association with low serum magnesium levels was an independent risk factor for 1‐year mortality (hazard ratio: 2.92; 95% CI: 1.53–6.40, P < 0.001). Discussion Serum magnesium levels are lower in PPI use. In the inflammatory state, a low serum magnesium level is a significant predictor of mortality in hemodialysis patients.     

Specialist Leaf Beetle Larvae Use Volatiles from Willow Leaves Infested by Conspecifics for Reaggregation in a Tree

Young, gregariously living larvae of the willow leaf beetles Plagiodera versicolora are known to exhibit characteristic aggregation-dispersion-reaggregation behavior and local fidelity to a host tree. In this study, we investigated whether plant volatiles induced by feeding P. versicolora larvae were involved in the reaggregation behavior. Under laboratory conditions, we conducted dual-choice bioassays and found that the first and second instars discriminated between volatiles from leaves infested by larvae and volatiles from uninfested leaves. The discriminative behavior was dependent on both the time leaves were infested and the age of discriminating larvae. First and second instars preferred odor from 1-d-infested leaves to odor from uninfested leaves, whereas third instars (solitary stage) did not discriminate between these volatile blends. Odor from 2-d-infested leaves was preferred to odor from 1-d-infested leaves by first instars, whereas odor from leaves infested for 3 d was not attractive to these very young larvae. Neither was odor of leaves infested for 1 d and then left uninfested for 1 or 2 d attractive to young larvae. The data suggest that the first and second instars use volatiles from a leaf newly infested by conspecific larvae as one of the reaggregation cues. We detected several herbivore-induced compounds in the headspace of the attractive leaves. Among those, a mixture of synthetic (E)-β-ocimene, (Z)-β-ocimene, allo-ocimene, and linalool was found to attract the larvae.     

Diameter-Controlled Synthesis of Polyaniline Nanofibers

Summary  Various diameters of polyaniline (PANI) nanofibers were easily made by varying the sweep rate in the electrochemical polymerization of the aniline monomer. At a sweep rate of 5 mV/s, the PANI nanofibers have an average diameter of 450 nm with a median of 440 nm. The fibers are short, on the order of a few microns in length, and exhibit a branched geometry. Increasing the sweep rate to 50 mV/s produced longer nanofibers with a smaller average diameter of 200 nm. Nanofibers synthesized at 100 mV/s were noted to be smaller with an average and median diameter of 100 nm. These results illustrate the ease in which the morphology of nanostructured PANI can be altered and indicate that the method has the potential to create multi-diameter fibers or mixed-morphology materials.     

Application of an electron backscatter diffraction pattern to Cu damascene-fabricated interconnections filled by a high-pressure anneal process

The microstructure of Cu interconnections fabricated by high-pressure annealing was evaluated using a field emission scanning electron microscope/electron backscatter diffraction pattern (FE-SEM/EBSP) technique, and the results are compared with as-deposited and normally annealed Cu films. The results show some grains extending from the bulk field to the via regions in the case of the high-pressure annealed Cu films. The existence of via holes was also observed, in which all grains were (111) oriented. This indicates that the high-pressure annealing process enables the Cu that in-fills the via holes to develop into favorable microstructures, i.e., single-crystal and with (111) orientation.     

Bio‐Hybrid Cell‐Based Actuators for Microsystems

As we move towards the miniaturization of devices to perform tasks at the nano and microscale, it has become increasingly important to develop new methods for actuation, sensing, and control. Over the past decade, bio‐hybrid methods have been investigated as a promising new approach to overcome the challenges of scaling down robotic and other functional devices. These methods integrate biological cells with artificial components and therefore, can take advantage of the intrinsic actuation and sensing functionalities of biological cells. Here, the recent advancements in bio‐hybrid actuation are reviewed, and the challenges associated with the design, fabrication, and control of bio‐hybrid microsystems are discussed. As a case study, focus is put on the development of bacteria‐driven microswimmers, which has been investigated as a targeted drug delivery carrier. Finally, a future outlook for the development of these systems is provided. The continued integration of biological and artificial components is envisioned to enable the performance of tasks at a smaller and smaller scale in the future, leading to the parallel and distributed operation of functional systems at the microscale.     

Investigation of pesticide residues in foods distributed in Kitakyushu City

We investigated 160 kinds of pesticide residues in 715 samples of 116 kinds of foods distributed in Kitakyushu city. Sixty kinds of pesticides were detected in 55 kinds of foods (204 samples) in the range of 0.002-22 mg/kg. Five kinds of pesticides in 7 samples violated the residue standards and the indication of "unused". The detection ratios of unregulated pesticide in domestic and imported foods were 27.8 and 33.0%, respectively. Iprodione, dicofol, diethofencarb, procymidone and chlorfenapyr (for domestic food) and total bromine, benomyl, chlorpyrifos, dicofol, fenvalerate, cypermethrin and dimethoate (for imported food) showed relatively high detection ratios. Chinese cabbage, garland chrysanthemum, tomatoes and green teas (domestic) and broccoli, bananas, grapefruit, lemons, oranges, frozen edamame and frozen kidney beans (imported) showed high relative pesticide detection ratios. Residual pesticides were detected with relatively high frequency in imported fruits, imported frozen foods and imported processed foods.     

Organic groups and molecular weight distribution in tertiary effluents and renovated waters

Group composition and MW distribution of soluble organics in effluents from successive biological and chemical treatment stages were investigated.In secondary effluents, most of the organics fell within the high MW range. Lime treatment caused marked reduction of the latter group, combined with removal of proteins, humics, and carbohydrates. (The overall removal amounted to approx. 65–75%). Simultaneously, there was an increase in the lowest MW range group—strongly hydrophilic, unidentifiable compounds outside the classification scheme used.