Polyetherimide-LaNi5 composite films for hydrogen storage applications

This study investigates the preparation of polyetherimide (PEI) – LaNi₅ composites films for hydrogen storage. Prior to the polymer addition, LaNi₅ was ball-milled at different conditions (250, 350, and 450 RPM) and annealed at 500 °C for 1 h under vacuum. The composites were produced with BM-LaNi₅-350 (PEI/LaNi₅-350) and annealed BM-LaNi₅-350 (PEI/LaNi₅-350-TT). Membranes were successfully produced through solvent casting assisted by an ultrasonic bath. The particles dispersion and the film morphology did not change after hydrogenation cycles. In the H₂ sorption experiments at 43 °C and 20 bar, the films stored H₂ without incubation time; both samples reached a capacity of ~0.6 wt%. The H₂ sorption kinetics of PEI/LaNi₅-350 was comparable to that of BM-LaNi₅-350, whereas PEI/LaNi₅-350-TT presented significantly slower kinetics. LaNi₅ oxidation was hindered by PEI, showing that it can be explored to improve metal hydrides air resistance. The results demonstrated that PEI films filled with LaNi₅ are promising materials for hydrogen storage.     

Real‐time monitoring by proton relaxometry of radical polymerization reactions of acrylamide in aqueous solution

The potential of time‐domain nuclear magnetic resonance (TD‐NMR) for the real‐time monitoring of solution radical polymerizations is demonstrated. A model system composed of a redox‐pair initiator system, acrylamide as monomer and water as solvent was investigated. A second‐generation continuous wave free precession technique was employed to measure the longitudinal relaxation time constant (T₁) of the samples throughout the polymerization reactions. This parameter was shown to be sensitive to the reactant feed free‐radical enhancement of the water molecule relaxation time, making it a good probe to monitor monomer conversion in real time in an automated, non‐destructive fashion. It was found that the T₁ value was better than the transverse relaxation time constant (T₂) for describing the evolution of the polymerization reactions, due to its greater sensitivity to paramagnetic effects. The TD‐NMR signal variation observed was linked to the formation, propagation and termination steps of the radical polymerization kinetics scheme. These first results may contribute to the application of real‐time monitoring of radical polymerization reactions employing low‐cost and robust TD‐NMR spectrometers. © 2018 Society of Chemical Industry     

The effect of synthesis conditions on the physicochemical properties of magnesium aluminate materials

Magnesium aluminate-based materials were prepared by applying different methods: (i) mechanochemical milling of the initial mixture of magnesium and aluminium nitrate powders (in appropriate stoichiometric amounts) followed by heat treatment at temperatures of 650 °C and 850 °C and (ii) melting of the mixture of nitrate precursors at 240 °C followed by thermal treatment at 650 °C, 750 °C and 850 °C. The effect of synthesis method on the structure and morphology of the obtained solids was studied by using various techniques such as: nitrogen adsorption-desorption isotherms, powder XRD, IR spectroscopy and SEM. It was shown that the mechanochemical milling performed before calcination procedure leads to obtaining of nanocrystalline magnesium aluminate spinel phase at lower temperature of 650 °C in comparison with the method using thermal treatment only (at 750 °C). The obtained nanomaterials exhibit mesoporous structure.     

IL-4- and IL-5-secreting lymphocyte populations are preferentially stimulated by parasite-derived antigens in human tissue invasive nematode infections

Helminth infections in humans and animals are associated with strong T helper 2 (Th2) responses. To determine whether parasite-derived Ag preferentially expand a Th2-like cell population, a filter immunoplaque assay was used to enumerate the frequencies (F0) of PBMC and CD4(+)-enriched PBMC from individuals with helminth infections secreting selected cytokines in response to parasite-derived (PAg) and nonparasite antigens (NPAg). In 20 individuals with lymphatic filariasis, frequency analysis of PBMC secreting IL-4 and IFN-gamma indicated that the F0 of PAg-specific IL-4-secreting cells (geometric mean F0 (GM): 1/12,100) was 57-fold higher than the corresponding F0 of NPAg-reactive cells (GM: 1/692,000; p < 0.02). In marked contrast, the F0 of IFN-gamma-secreting cells responding to PAg (GM: 1/2,700) did not differ from those of cells specific for NAPg (GM: 1/3,400; p = 0.83). In another group of helminth-infected individuals, the F0 of highly enriched CD4+ cells secreting IL-4 and IL-5 in response to PAg (GMs: 1/2,600 and 1/5,600 CD4+ cells, respectively) were also found to be significantly higher than those specific for NPAg (GMs: 1/291,000 and 1/303,000 CD4+; p < 0.05 and p < 0.01, respectively), whereas the corresponding F0 of IFN-gamma- and granulocyte-macrophage-CSF-secreting cells were equivalent for PAg and NPag. Furthermore, the proportion of PAg-specific IL-4- and IL-5-secreting CD4+ cells relative to all cells secreting the given cytokine were approximately 29-fold higher than the proportion of NPAg-specific cells secreting these cytokines. Again, the corresponding proportions of Ag-specific IFN-gamma-and GM-CSF-secreting CD4+ cells were equivalent for PAg and NPAg. Thus, in this ex vivo system, a circulating population of IL-4- and IL-5-secreting (Th2-like) cells has been shown to exist in humans; PAg appears to expand these cells preferentially.     

Preparation and characterization of chitosan‐based dispersions

Complexation of chitosan in aqueous solutions by low molecular weight electrolytes is one of the simplest methods for the preparation of aqueous chitosan dispersions. In this work, the influence of storage time, sulfate concentration, method of preparation and surfactant content on some properties of the resultant chitosan dispersions (turbidity, viscosity and zeta potential) was analyzed. Turbidimetry was adequate to monitor the formation of particles, while viscometry was suitable to monitor changes in the dispersing phase. An analysis of the properties of these systems, mainly in terms of particle–particle and macromolecule–macromolecule interactions was carried out. Copyright © 2004 Society of Chemical Industry     

Full Complex Amplitude Digital Holograms： Design, Fabrication and Optical Characterization

Diffractive optical elements have a large number of industrial applications, such as beam shaping and optical filtering. Traditionally, these elements modulate the phase of the incoming light or its amplitude, but not both. To overcome this limitation, full complex-amplitude modulation diffractive optical elements were developed. Well-established integrated circuit fabrication steps were employed to fabricate the devices with high precision. Using this approach, the new element‘s optical performances are improved also for near field operations. With this device it is possible to obtain 100% efficient spatial filtering and low noise reconstructed images.