Synthesis of amino-cosubstituted polyorganophosphazenes and fabrication of their nanoparticles for anticancer drug delivery

The development of safe drug carriers is cardinal in cancer therapy, which can target the cancer cells and release the loaded drug on-demand without damaging the healthy cells of the body. In our work, we synthesized three different biodegradable polymers, poly[(ethyl aminobezoate) (ethyl glycinato) phosphazenes] (PABGPs), in different mole ratio of side groups. The successful synthesis of these PABGPs was confirmed by ¹H NMR, ³¹P NMR, FT-IR, and gel permeation chromatography. These PABGPs were fabricated into drug (camptothecin, CPT, a hydrophobic anticancer drug) loaded nanoparticles. These drug-loaded nanoparticles showed good drug release behaviors under normal physiological conditions (pH 7.4 and temperature 37°C). These PABGPs-based nanoparticles may find their application as effective drug carriers for cancer therapy.     

Influence of the silicon surface treatment by plasma etching and scratching on the nucleation of diamond grown in HFCVD - a comparative study

A comparative study for the nucleation of diamond was carried out using surface treatment like (i) surface scratching with 1 μm diamond paste and (ii) surface etching using chlorine plasma at different RF powers (50, 100 and 150 W). Atomic force microscopic study shows variation in roughness from 31 nm to 110 nm. Scratching results in random scratches, whereas plasma etches a surface uniformly. Scanning electron microscopic observations show well faceted crystallites with a predominance of angular shaped grains corresponding to 〈100〉 and 〈110〉 crystallite surfaces for the scratched as well as plasma etched substrate. Surface etching at 150 W plasma power results in a better growth in comparison with 50 and 100 W plasma powers. Chlorine-radical is found responsible for the changes in the growth morphology. Raman spectroscopy shows a sharp peak at 1,332 cm⁻¹ and a peak at ∼1,580 cm⁻¹ for both samples.     

Data decomposition using independent component analysis with prior constraints

In many data analysis problems, it is useful to consider the data as generated from a set of unknown (latent) generators or sources. The observations we make of a system are then taken to be related to these sources through some unknown function. Furthermore, the (unknown) number of underlying latent sources may be less than the number of observations. Recent developments in independent component analysis (ICA) have shown that, in the case where the unknown function linking sources to observations is linear, such data decomposition may be achieved in a mathematically elegant manner. In this paper, we extend the general ICA paradigm to include a very flexible source model, prior constraints and conditioning on sets of intermediate variables so that ICA forms one part of a hierarchical system. We show that such an approach allows for efficient discovery of hidden representation in data and for unsupervised data partitioning.     

Leakage mitigation in NW FET using negative Schottky junction drain and its process variation analysis

Journal of Computational Electronics - In this work, a Schottky junction on the drain side employing low workfunction (WF) metal is proposed as a method to suppress the OFF-state leakage in...     

Initial Deposition of Colloidal Particles on a Rough Nanofiltration Membrane

The initial rate of colloid deposition onto semi‐permeable membranes is largely controlled by the coupled influence of permeation drag and particle‐membrane colloidal interactions. Recent studies show that the particle‐membrane interactions are subject to immense local variations due to the inherent morphological heterogeneity (roughness) of reverse osmosis (RO) and nanofiltration (NF) membranes. This experimental investigation reports the effect of membrane roughness on the initial deposition of polystyrene latex particles on a rough NF membrane during cross flow membrane filtration under different operating pressures and solution chemistries. Atomic force microscopy was used to characterize the roughness of the membrane and observe the structure of particle deposits. At the initial stages of fouling, the AFM images show that more particles preferentially accumulate near the “peaks” than in the “valleys” of the rough NF membrane surface.     

Eco-friendly electronics,based on nanocomposites of biopolyester reinforced with carbon nanotubes: a review

ABSTRACT

Fabrication of electronic materials from nanocomposite of biopolyesters reinforced with carbon nanotubes can be regarded as the effective alternative for conventional nanocomposites consisting of non-biodegradable polymers. Commercial availability of biopolyester-based nanocomposites is limited because of their high cost compared to other polymers, but the factor of their compostable nature is worthless for environmental protection. Such nanocomposites have potential applications in biodegradable sensors, EMI materials, etc. In this review, the current progress of biopolyester/CNTs nanocomposites in the field of biodegradable electronics is reviewed and also the impact of CNTs dispersion on electrical, thermal and mechanical properties of eco composites is stipulated.     

Ultrahigh molecular weight polyethylene with improved crosslink density,oxidation stability,and microbial inhibition by chemical crosslinking and tea polyphenols for total joint replacements

Highly crosslinked ultrahigh molecular weight polyethylene (UHMWPE) stabilized by vitamin E (VE) is widely applied in artificial joints as the bearings. Despite the approval, there is a discord that VE lowers the crosslinking efficiency, limiting its use at high concentration. In this work, we aim to obtain highly crosslinked and oxidation resistant UHMWPE through the conjunction of tea polyphenol and chemical crosslinking. We hypothesized that highly incorporated tea polyphenol with multiple reactive sites can ameliorate crosslinking efficiency of chemical crosslinked UHMWPE in comparison to VE. Epigallocatechin gallate (EGCG) as representative tea polyphenol was incorporated into UHMWPE at high concentration (2–8 wt%), followed by chemical crosslinking with 2 wt% organic peroxide. Unlike VE/UHMWPE blends as the control, chemical crosslinking achieved an increasing trend in crosslink density of EGCG/UHMWPE blends with increasing antioxidant concentration. High concentration of EGCG also enhanced the oxidation stability of UHMWPE. Intriguingly, EGCG endowed UHMWPE with an excellent antimicrobial property, which was inefficient in VE/UHMWPE. Cell viability was hardly affected by the high loaded antioxidant and peroxide. The chemically crosslinked UHMWPE blended with EGCG is proved to be a reasonable, cost effective and realistic alternative for use in artificial joints.     

Three-qubit Grover’s algorithm using superconducting quantum interference devices in cavity-QED

We present a scheme for the implementation of three-qubit Grover’s algorithm using four-level superconducting quantum interference devices (SQUIDs) coupled to a superconducting resonator. The scheme is based on resonant, off-resonant interaction of the cavity field with SQUIDs and application of classical microwave pulses. We show that adjustment of SQUID level spacings during the gate operations, adiabatic passage, and second-order detuning are not required that leads to faster implementation. We also show that the marked state can be searched with high fidelity even in the presence of unwanted off-resonant interactions, level decay, and cavity dissipation.     

Extended Kalman filter based speeds estimation of series-connected five-phase two-motor drive system

The multi-phase machines enables independent control of a few number of machines that are connected in series in a particular manner, and the supply is fed from a single voltage source inverter (VSI). The idea was first implemented for a five-phase series-connected two-motor drive system, but is now applicable to any number of phases. The number of series-connected machines is a function of the phase number of VSI. Variable speed induction motor drives without mechanical speed sensors at the motor shaft have the attractions of low cost and high reliability. To replace the sensor, information of the rotor speed is extracted from measured stator currents and voltages at motor terminals. Open-loop estimators or closed-loop observers are used for this purpose. They differ with respect to accuracy, robustness, and sensitivity against model parameter variations. This paper analyses operation of an EKF-based sensorless control of vector controlled series-connected two-motor five-phase drive system with current control in the stationary reference frame. Results, obtained with fixed voltage and fixed frequency supply fed and hysteresis current control, is presented for various operating conditions on the basis of simulation. The purpose of this paper is to report first time, the simulation results on a sensorless control of a five-phase two-motor series-connected drive system using EKF estimator.