Supporting primary students' learning of fraction conceptual knowledge through digital games

With the advent of mobile technologies, well-designed fraction apps can be used to help children gain fraction knowledge, a challenging topic for both teachers and students. The present pilot study adopted a quasi-experimental design to investigate whether children can learn fraction concepts equally well if half of the lesson time (20 min) is replaced with game-based learning. Keeping the total lesson time (40 min) identical, the control group (N = 33) received traditional instruction, and the experimental group (N = 32) was presented with a blended learning approach spending half of the class time (20 min) playing tablet-based fraction games, where each of the learners had their own tablet. The results suggested that in the posttest, the experimental group achieved similar learning gains to the control group and appear to have achieved better performance in the transfer test than the control group. This paper also discusses the efficiency of game-based learning, the mechanism of how fraction games might enhance learning, and the potential of integrating game-based learning in educational settings.     

双膦胺镍-甲基铝氧烷体系催化苯乙烯聚合

研究了具有新型结构的双膦胺镍配合物N,N-双(二苯膦基)-对甲氧基苯胺二氯化镍-甲基铝氧烷(PNP-N i-MAO)催化体系对苯乙烯聚合的催化性能,考察了聚合温度、n(A l)∶n(PNP-N i)、PNP-N i的浓度和苯乙烯的浓度对催化活性、苯乙烯转化率、聚苯乙烯相对分子质量及其分布的影响,并用核磁共振和凝胶色谱对聚苯乙烯的结构进行了表征。实验结果表明,在聚合温度25℃、聚合时间1h、n(A l)∶n(PNP-N i)=300、c(苯乙烯)=2.3m ol/L、c(PNP-N i)=0.4mm ol/L、甲苯为溶剂的适宜条件下,苯乙烯的转化率可达95%以上,催化活性达到5×105g/(m ol.h)左右。核磁共振和凝胶色谱表征结果显示,所得聚苯乙烯为无规结构,重均相对分子质量约为1×104,相对分子质量分布Mw/Mn约为2。     

医学超声图像处理系统

超声图像诊断是与X线CT、同位素扫描、核磁共振等一样重要的医学图像诊断手段。根据肝脏超声图像进行脂肪肝的诊断,是病变确诊的主要方法。但是,与CT和核磁共振等医学图像相比,超声图像的图像质量较差,目前的诊断以定性为主,受主观因素影响较大。以图像分割为基础,以VC语言为工具,建立了超声图像处理系统,对超声图像进行了二值化处理,并对处理结果进行了量化,为诊断提供了依据。     

真空铸造高强度C/Mg复合材料

本文介绍用真空铸造法制造抗拉强度超过1000MPa的高强度C/Mg复合材料。将T300纤维经C-Si-O梯度涂层处理后单向排布于型腔内,在真空下注入ZM-5合金液,凝固后即得C/Mg复合材料零件或试样。试样的抗拉强度在纤维体积分数为0.35时达1050MPa。本文讨论C-Si-O梯度涂层对获得高强度复合材料的作用。     

SOPHO—S的结构分析与线路传输技术

ＳＯＰＨＯ－Ｓ系列数字程控交换机是由飞利蒲公司生产的。本文分析了该系列交换机的总体结构，并了它的线路传输技术。     

On loop transformations for generalized cycle shrinking

This paper describes several loop transformation techniques for extracting parallelism from nested loop structures. Nested loops can then be scheduled to run in parallel so that execution time is minimized. One technique is called selective cycle shrinking, and the other is called true dependence cycle shrinking. It is shown how selective shrinking is related to linear scheduling of nested loops and how true dependence shrinking is related to conflict-free mappings of higher dimensional algorithms into lower dimensional processor arrays. Methods are proposed in this paper to find the selective and true dependence shrinkings with minimum total execution time by applying the techniques of finding optimal linear schedules and optimal and conflict-free mappings proposed by W. Shang and A.B. Fortes     

CAD/CAM在注射模设计中的应用

以Pro/E、Moldflow软件为例,对CAD/CAM技术在注射模设计中的应用进行了研究和探讨,总结了使用该软件的一些体会,阐述了注射模CAD/CAM技术的发展趋势。