Motion Perception Using Analog VLSI

Motion perception is arguably a fundamental mechanism used by natural species to accomplish a number of tasks, such as navigating freely in an unknown environment. Traditional motion perception methods tend to be computationally intensive, requiring powerful computers and large memories. However, by copying biological mechanisms, such as elementary motion discrimination at the early stages of the visual processing paths, it should be possible to build small and efficient motion perception systems. This paper describes the manner in which a simple motion perception model based on the insect visual system has been implemented using mixed analog/digital VLSI. The device has been fabricated in a 2 micron double metal, double polysilicon process, and comprises 61 photo-detectors, and associated analog and digital circuitry. While not entirely successful in that component mismatches hamper the detection of dark-to-bright changes in contrast, the results clearly show the feasibility of using such a device in autonomous control systems.     

Thin-skin analysis technique for interaction of arbitrary-shape inducer field with long cracks in ferromagnetic metals

In using the AC field measurement (ACFM) technique for non-destructive evaluation (NDE) of metals, a current-carrying wire structure is used to induce eddy current within a thin layer of the metal and a magnetic field sensor to measure the field perturbations in the vicinity of the metal. The sensitivity of ACFM crack detection and sizing relies on an appropriate design of the wire structure geometry together with a dully placement of the sensor. This paper presents an analytical modeling technique for evaluating the electromagnetic field interaction of an ACFM probe with a long uniform crack in a ferromagnetic metallic slab. The probe in the proposed model can have an arbitrary-shape wire inducer with no restrictions on its relative sensor position. The technique is accurate and very efficient computationally. It first uses the two-dimensional Fourier transform to obtain the field distribution at the metal surface. The Laplacian field distribution above the metal is then determined by satisfying the so-obtained boundary condition at air–metal interface. To demonstrate the accuracy of the model, we consider the special case of a rhombic wire inducer. The comparison of our results with those obtained using the conventional algorithm in the literature validates the accuracy of the model introduced in this paper. To show the generality of the model, we also present theoretical and experimental results associated with a solenoid inducer with a three-dimensional geometry for which no analytical solution is available in the literature. The theoretical prediction of crack signal supported by experimental results is used to develop a model-based method for inverting crack signal into crack depth.     

An efficient certificateless undeniable signature scheme

Certificateless cryptography addresses the private key escrow problem in identity-based systems, while overcoming the costly issues in traditional public key cryptography. Undeniable signature schemes were proposed with the aim of limiting the public verifiability of ordinary digital signatures. The first certificateless undeniable signature scheme was put forth by Duan. The proposed scheme can be considered as the certificateless version of the identity-based undeniable signature scheme which was introduced by Libert and Quisquater. In this paper, we propose a new scheme which is much more efficient comparing to Duan's scheme. Our scheme requires only one pairing evaluation for signature generation and provides more efficient confirmation and disavowal protocols for both the signer and the verifier. We also prove the security of our scheme in the strong security model based on the intractability of some well-known pairing-based assumptions in the random oracle model.     

A fast wavelet-based moment method for solving thin-wire EFIE

Solving the thin-wire electric field integral equation (EFIE) by the multiresolution wavelet expansion method involves a time-consuming double numerical integration for each nonzero element of the moment matrix which in turn can outweigh the advantages of achieving a sparse matrix. To speed up the matrix fill process in wavelet-based moment method codes, first, the triangular scaling functions of a nonorthogonal piecewise liner wavelet at the finest spatial resolution are appropriately replaced by sinusoidal dipoles for which mutual impedances are available in closed-form analytical expressions. The fast wavelet bases transform is then exploited to effectively transfer the resultant matrix equation to multiresolution wavelet domain. Numerical results obtained by the compactly supported semi-orthogonal linear B-spline wavelet demonstrate dramatic reduction of the overall solution time without any degradation in the accuracy of the final solution.     

Determination of phenolic profile and antioxidant activity of pistachio hull using high-performance liquid chromatography–diode array detector–electro-spray ionization–mass spectrometry as affected by ultrasound and microwave

The phytochemicals content and radical scavenging activity of pistachio (Pistacia vera L.) hull extract obtained by different solvents (water, ethanol, and butanol) were measured and compared. Water was selected as superior solvent. Ultrasound-assisted aqueous extraction of the hull by power ultrasound (35 kHz) was more efficient in ascending the phytochemicals content than the sonochemical ultrasonication (130 kHz). High-performance liquid chromatography-mass spectrometry showed increased amounts of vanillic acid, p-coumaric acid, naringenin, and catechin in ultrasound-assisted extracts. Post-extraction sonication declined significantly the phenolics amount and antioxidant property of the aqueous extract. Microwave-assisted extraction increased the phenolics and flavonoids content at extract in a power-dependent trend.     

Structure–property relationships in ternary polymer blends with core–shell inclusions: revisiting the critical role of the viscosity ratio

Structure–property relationship in typical polypropylene/polycarbonate/poly[styrene-b-(ethylene-co-butylene)-b-styrene] (PP/PC/SEBS) ternary blends containing maleated SEBS (SEBS-g-MAH) was investigated. Three grades of PC with different melt viscosities were used, and changes in blend morphology from PC/SEBS core–shell particles partially surrounded by SEBS-g-MAH to inverse SEBS/PC core–shell particles in PP matrix were observed upon varying the viscosity ratio of PC to SEBS. It was found that the viscosity ratio completely controls the size of the core–shell droplets and governs the type, population, and shape of the dispersed domains, as evidenced by rheological, mechanical, and thermomechanical behavioral assessments. Dynamic mechanical analysis of samples with common (PC–SEBS) and inverse (SEBS–PC) core–shell particles revealed that they show completely different behaviors: blends containing PC–SEBS presented a higher storage and loss modulus, while blends containing SEBS–PC exhibited a lower β-transition temperature. Moreover, ternary blends with PC cores showed the highest Young’s modulus values and the lowest impact strength, due to the different fracture modes of the blends containing PC–SEBS and SEPS–PC core–shell droplets, which present debonding and shell-fracture mechanisms, respectively. Morphological observations of blends with high-molecular-weight PC demonstrated the presence of detached droplets and rods of PC in the PP matrix, along with composite core–shell and rod-like particles. Micrographs of the fracture surfaces confirmed the proposed mechanisms, given the presence of stretched (debonded) PC (SEBS) cores encapsulated by SEBS (PC), which require more (less) energy to achieve fracture. The correlation between the mechanical and morphological properties proves that decreasing core diameter and shell thickness has positive effects on the impact strength but decreases the Young’s modulus.     

Piperazine and methyldiethanolamine interrelationships in CO2 absorption by aqueous amine mixtures. Part II—Saturation rates of mixed reagent solutions

This work is a companion to a previous article, Part I, published in The Canadian Journal of Chemical Engineering, dealing with CO₂ absorption in aqueous solutions containing a single aminic reagent (specifically methyldiethanolamine (MDEA) or piperazine (PZ)). In this second part, different PZ/MDEA mixtures are experimentally studied and their performances are compared with that of the single reagents. It is indeed well known that small quantities of PZ added to MDEA aqueous solutions are sufficient to obtain a significant improvement in the kinetics of the process. PZ is considered an activator or promoter for MDEA, but the mechanism of this synergy has still not been clearly demonstrated. The aim of this study is an attempt to understand how PZ and MDEA can interact by experimentally analyzing this beneficial mutual effect and by explaining it with the help of a suitable yet not complex model. We believe that the involved chemistry is not more complex than that reported in Part I for the single reagents. According to our findings, it is MDEA that enhances the action of PZ, as opposed to what many authors claim. Moreover, our results seem to rule out the existence of any PZ shuttle effect.     

Hydroquinone as a buffer additive for suppression of bubbles formed by electrochemical oxidation of the CE buffer at the outlet electrode in capillary electrophoresis/electrospray ionization-mass spectrometry

Hydroquinone was found to suppress bubble formation at the outlet electrode of a sheathless capillary electrophoresis/electrospray ionization-mass spectrometer by replacing the oxidation of water (2H2O(1)<-->O2(g) + 4H+ + 4e) with that of more easily oxidized hydroquinone (hydroquinone<-->p-benzoquinone + 2H+ + 2e). Formation of p-benzoquinone replaces the formation of oxygen gas, effectively suppressing gas bubble formation. Several electrode materials, including platinum, gold-coated stainless steel, and stainless steel wires, were tested. However, hydroquinone suppressed bubbles only at the platinum electrode. Combination of the in-capillary electrode sheathless interface using platinum wire, hydroquinone as a buffer additive, and pressure programming at the inlet of the capillary electrophoresis provided a rugged high efficiency interface for analysis of protein digests using CE/ESI-MS.     

Analysis of underivatized amino acids and their D/L-enantiomers by sheathless capillary electrophoresis/electrospray ionization mass spectrometry

Capillary electrophoresis/electrospray ionization-mass spectrometry (CE/ESI-MS) was applied to the analysis of underivatized amino acids and the separation of their D/L-enantiomers. Under full-scan mode, all standard protein amino acids were separated and detected at low-femtomole levels using a 130-cm-long, 20-microm-i.d., 150-microm-o.d. underivatized fused-silica capillary with 1 M formic acid as the background electrolyte. The CE/ESI-MS technique was also applied to the separation of L-arginine from L-canavanine (a close analogue of arginine where the terminal methylene linked to the guanidine group of arginine is replaced by an oxygen atom) in a complex mixture containing all standard protein amino acids. The utility of CE/ESI-MS in the analysis of real-world samples was demonstrated by the identification of two metabolic diseases (PKU and tyrosinemia) through blood analysis with minimal sample preparation. In addition, the on-line separation of 11 underivatized L-amino acids from their D-enantiomers was achieved by using a 30 mM solution of (+)-(18-crown-6)-2,3,11,12-tetracarboxylic acid as the background electrolyte.