Radiophotoluminescence phenomenon in copper-doped aluminoborosilicate glass

Radiophotoluminescence phenomena have been widely investigated on various types of materials for dosimetry applications. We report that an aluminoborosilicate glass containing 0.005 mol% copper exhibits intense photoluminescence in the visible region induced by X-ray and γ-ray irradiation. The luminescence is assigned to the 3d⁹4s¹ → 3d¹⁰ transition of Cu⁺. The proportionality of the intensity of the induced photoluminescence to the irradiation dose was confirmed up to 0.5 kGy using ⁶⁰Co γ-ray irradiation. Based on the spectroscopic results, a potential mechanism was proposed for the enhancement of the photoluminescence. The exposure to the ionizing radiation generates electron-hole pairs in the glass, and the electrons are subsequently captured by the Cu²⁺ ions, which are converted to Cu⁺ and emit the luminescence. For the glass containing 0.01 mol% copper, the pronounced enhancement of the photoluminescence was not observed because the reverse reaction, ie, the capture of the holes by the Cu⁺ ions, becomes prominent. The photoluminescence induced by the irradiation was stably observed for the glasses kept at room temperature and even for the glasses heat-treated at 150°C. However, the induced photoluminescence could be eliminated by the heat treatment at a temperature at 500°C, and the glass returned to the initial pre-irradiation state. The Cu-doped aluminoborosilicate glass is a potential candidate for use in dosimetry applications.     

Real-Time Duplex Applications of Loop-Mediated AMPlification (LAMP) by Assimilating Probes

Isothermal nucleic-acid amplification methods such as Loop-Mediated isothermal AMPlification (LAMP) are increasingly appealing alternatives to PCR for use in portable diagnostic system due to the low cost, weight, and power requirements of the instrumentation. As such, interest in developing new probes and other functionality based on the LAMP reaction has been intense. Here, we report on the development of duplexed LAMP assays for pathogen detection using spectrally unique Assimilating Probes. As proof of principle, we used a reaction for Salmonella enterica as a model coupled with a reaction for λ-phage DNA as an internal control, as well as a duplexed assay to sub-type specific quarantine strains of the bacterial wilt pathogen Ralstonia solanacearum. Detection limits for bacterial DNA analyzed in individual reactions was less than 100 genomic equivalents in all cases, and increased by one to two orders of magnitude when reactions were coupled in duplexed formats. Even so, due to the more robust activity of newly available strand-displacing polymerases, the duplexed assays reported here were more powerful than analogous individual reactions reported only a few years ago, and represent a significant advance for incorporation of internal controls to validate assay results in the field.     

Craze yielding and fracture mechanism in PE/PS/PE laminated films

The change in polystyrene (PS) layer thickness, which has been simultaneously determined during post-yield deformation, shows that crazing is the basic mechanism of toughening in all laminated films, and that shear deformation supplements the contribution of crazing especially for samples with high polyethylene (PE) volume fractions. Crazes formed in PS layers in the laminated films are slender and regular compared with the short and lenticular crazes formed in bulk PS film. When PE volume fraction increased, craze advance speed decreased because of the reduction of the stress concentration effect at craze tips. The life-time of the first mature craze to be formed at a given strain rate increased with PE volume fraction because the PE supporting the mature crazes could effectively inhibit craze rupture and blunt out the propagating crack by absorbing the stored elastic energy in the PS layer that would have been dissipated as fracture surface energy.     

Electron acceleration by single and double laser beams

The longitudinal electric field of single and double Gaussian laser beams are used to accelerate electrons. The longitudinal field of the single beam is concentrated on the axis and is favourable for acceleration. A set of two beams is considered. Beams run parallel, collinearly, overlap partially and have a phase difference iπ in between. As a result, the transverse components of fields cancel each other while the longitudinal components are double-fold. In both schemes, the electrons are accelerated in lengths of the Rayleigh range, which is common to the plasma-based accelerators.     

Performance analysis of disk allocation method usingerror-correcting codes

The problem of distributing a Cartesian product file on multiple disks to maximize the parallelism for partial match queries is addressed. C. Faloutsos et al. (1989) have proposed an allocation method for Cartesian product files on multiple disks by using linear error-correcting codes. The performance of the allocation method is analyzed. Some conditions under which the allocation method is strictly optimal for queries with a given number of unspecified attributes are presented. A necessary and sufficient condition for a linear code to give a strictly optimal allocation method is discussed. Formulas for the average response time on queries with w unspecified attributes, denoted T_w, in terms of the weight distribution of the code or its dual code, and formulas for the average response time Ton all queries, are given. Several examples whose average response times T_w or T are close to theoretical lower bounds are presented     

The heat transfer and pressure drop characteristics of finned tube banks in forced convection (effects of fin height on pressure drop characteristics)

In recent years the requirement for the reduction of energy consumption has been increasing to solve the problems of global warming and the shortage of petroleum resources. For example, in the power generation field, as thermal power generation occupied 60% of the power generation demand, considerable improvement of the thermal efficiency is required. This paper describes the pressure drop characteristics of finned tube banks used for heat exchangers in thermal power generation that were clarified by testing serrated finned tube banks with different fin heights for improved heat transfer and conventional spiral finned tube banks with different fin heights, and an equation to predict pressure drop which is necessary for the heat exchanger design is proposed. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(3): 179–193, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20112     

Chemical Modification of Phage-Displayed Helix-Loop-Helix Peptides to Construct Kinase-Focused Libraries

Conformationally constrained peptides hold promise as molecular tools in chemical biology and as a new modality in drug discovery. The construction and screening of a target-focused library could be a promising approach for the generation of de novo ligands or inhibitors against target proteins. Here, we have prepared a protein kinase-focused library by chemically modifying helix-loop-helix (HLH) peptides displayed on phage and subsequently tethered to adenosine. The library was screened against aurora kinase A (AurA). The selected HLH peptide Bip - 3 retained the α-helical structure and bound to AurA with a K_D value of 13.7 μM. Bip - 3 and the adenosine-tethered peptide Bip - 3 - Adc provided IC₅₀ values of 103 μM and 7.7 μM, respectively, suggesting that Bip - 3 - Adc bivalently inhibited AurA. In addition, the selectivity of Bip - 3 - Adc to several protein kinases was tested, and was highest against AurA. These results demonstrate that chemical modification can enable the construction of a kinase-focused library of phage-displayed HLH peptides.     

Thermal properties of poly(tetramethyl-p-silphenylene siloxane) and (tetramethyl-p-silphenylene siloxane-dimethyl siloxane) copolymers

Some physical properties of poly(tetramethyl-p-silphenylene siloxane) homopolymer and random block copolymers of tetramethyl-p-silphenylene siloxane-dimethyl siloxane have been determined and correlated with polymer structure. Differential scanning calorimetry (d.s.c.), differential thermal analysis (d.t.a.), density gradient column measurements and optical hot stage melting point determination and diluent techniques were used. The thermodynamic melting temperature of the homopolymer was estimated to be 160°C and its heat of fusion, ΔH_u, found to be 54.4 J/g (13 cal/g or 2710 cal/mol of monomer repeat units). Its limiting glass transition temperature, T_g, was ?20°C. T_g of the copolymer was found to vary almost monotonically with increasing dimethyl siloxane (DMS) content ranging from ?20° (0% DMS) to just above ?123°C, for pure DMS polymer. The copolymer melting temperature was found to increase as the fraction of the crystalline (hard) TMPS constituent was increased. Based upon copolymer theory and extrapolated melting point data, it was estimated that the block size of soft DMS component in the copolymer most probably consists of twelve monomer units distributed amongst TMPS sequences of varying length.     

Influence of ash composition on heavy metal emissions in ash melting process

Two kinds of fly ash, discharged in the combustion of either refused derived fuel (RDF) or car shredder dust (SD), were examined for the emission of heavy metals in melting process under oxidizing and reducing conditions. The residual fractions of heavy metal in slag were experimentally estimated. As a result, it was confirmed that several volatile heavy metals were readily emitted during melting process. The type of atmosphere provided for the melting process was found to affect the emission of some volatile metals in RDF ash, but not in SD ash. The emission of volatile heavy metals in RDF ash under oxidizing conditions was lower than under any other conditions in this study. The emission behavior of iron and heavy metals in RDF ash under reducing conditions was similar to that in SD ash. These facts indicated that phosphorous in RDF ash had the property of fixing the volatile metals in the slag only under oxidizing conditions. Then the mixture of SD ash with phosphorous oxide powder was also tested in a melting process, and the result was consistent with the above inference of the effect of phosphorous.