Optimizing the Runoff Estimation with HEC-HMS Model Using Spatial Evapotranspiration by the SEBS Model

Most of the commonly used hydrological models do not account for the actual evapotranspiration (ETa) as a key contributor to water loss in semi-arid/arid regions. In this study, the HEC-HMS (Hydrologic Engineering Center Hydrologic Modeling System) model was calibrated, modified, and its performance in simulating runoff resulting from short-duration rainfall events was evaluated. The model modifications included integrating spatially distributed ETa, calculated using the surface energy balance system (SEBS), into the model. Evaluating the model’s performance in simulating runoff showed that the default HEC-HMS model underestimated the runoff with root mean squared error (RMSE) of 0.14 m³/s (R²?=?0.92) while incorporating SEBS ETa into the model reduced RMSE to 0.01 m³/s (R²?=?0.99). The integration of HECHMS and SEBS resulted in smaller and more realistic latent heat flux estimates translated into a lower water loss rate and a higher magnitude of runoff simulated by the HECHMS model. The difference between runoff simulations using the default and modified model translated into an average of 95,000 m³ runoff per rainfall event (equal to seasonal water requirement of ten-hectare winter wheat) that could be planned and triggered for agricultural purposes, flood harvesting, and groundwater recharge in the region. The effect of ETa on the simulated runoff volume is expected to be more pronounced during high evaporative demand periods, longer rainfall events, and larger catchments. The outcome of this study signifies the importance of implementing accurate estimates of evapotranspiration into a hydrological model.

     

An FEC scheme combined with weighted scheduling to reduce multicast packet loss in IPTV over PON

Congestion is one of the most important challenges in optical networks. In a Passive Optical Network (PON), the Optical Line Terminal (OLT) is a bottleneck and congestion prone. In this paper, a framework is proposed with Forward Error Correction (FEC) at the IP layer combined with Weighted Round Robin (WRR) at the scheduling level to overcome packet-loss due to congestion in the OLT in order to achieve efficient video multicasting over PON. In the FEC scheme, Reed-Solomon (RS(n,k)) with erasure coding is used, where (n−k) erroneous symbols per n symbol blocks can be corrected. In our framework, an Internet Protocol TeleVision (IPTV) service provider uses the mentioned RS coding and generates redundant packets from regular IPTV packets in such a way that an Optical Network Unit (ONU) can recover lost packets from received packets, thus resulting in a better video quality. Simulation results show that using the proposed framework, an ONU can recover many lost packets and achieve better video quality under different traffic loads for its users. For instance, the proposed method can reduce packet loss rate by almost 55% and 10% under traffic load 0.9, respectively, compared with the Round Robin (RR) and WRR methods under symmetric traffic load. When High Receivers Queue (HRQ) traffic (i.e., traffic received by many users) is twice Low Receivers Queue (LRQ) traffic (i.e., traffic received by a small number of users), this reduction is almost 86% and 30% under traffic load 0.9. Finally, when LRQ traffic is twice HRQ traffic, the reduction in packet loss rate is almost 70% and 91% at traffic load 0.5.     

Leakage mitigation in NW FET using negative Schottky junction drain and its process variation analysis

Journal of Computational Electronics - In this work, a Schottky junction on the drain side employing low workfunction (WF) metal is proposed as a method to suppress the OFF-state leakage in...     

pHEMA: An Overview for Biomedical Applications

Poly(2-hydroxyethyl methacrylate) (pHEMA) as a biomaterial with excellent biocompatibility and cytocompatibility elicits a minimal immunological response from host tissue making it desirable for different biomedical applications. This article seeks to provide an in-depth overview of the properties and biomedical applications of pHEMA for bone tissue regeneration, wound healing, cancer therapy (stimuli and non-stimuli responsive systems), and ophthalmic applications (contact lenses and ocular drug delivery). As this polymer has been widely applied in ophthalmic applications, a specific consideration has been devoted to this field. Pure pHEMA does not possess antimicrobial properties and the site where the biomedical device is employed may be susceptible to microbial infections. Therefore, antimicrobial strategies such as the use of silver nanoparticles, antibiotics, and antimicrobial agents can be utilized to protect against infections. Therefore, the antimicrobial strategies besides the drug delivery applications of pHEMA were covered. With continuous research and advancement in science and technology, the outlook of pHEMA is promising as it will most certainly be utilized in more biomedical applications in the near future. The aim of this review was to bring together state-of-the-art research on pHEMA and their applications.     

Stability Margin Determination of Linear Discrete‐Time Systems Described By Fuzzy Convex Sets Uncertainty

This paper proposes a new method for determining the stability margin of uncertain linear discrete‐time systems with uncertainty described by fuzzy convex sets. Nonsymmetrical triangular membership functions describing the uncertainty of characteristic polynomial coefficients are considered. This method is based on transformation of the uncertain discrete systems to the continuous time area and generalization of Kharitonov theorem for determining the uncommon minimum confidence level that guarantees stability of the system.     

Identification and classification of ERP critical failure factors in Iranian industries

Implementation of Enterprise Resource Planning systems (ERPs) is a complex and costly process, which usually results in serious failures. The majority of previous studies and research projects have been conducted in identifying ERP Critical Success Factors (CSFs) rather than Critical Failure Factors (CFFs). On the other hand, most studies have been devoted to developed countries, while in developing countries, many companies have moved towards using such systems. The majority of IT/IS management standards and guidelines have been developed by technologically-leading countries. But developing countries, which mostly confront with especial challenges, have a different condition from the implicit assumptions of leading countries. Iran is one of these countries that many of its ERP implementation projects led to failure. There is no comprehensive study that identifies ERP CFFs in Iranian industries. The main purpose of this study is to identify such factors and classify them to help other industries, consultants and implementers to prevent failures in the implementation of ERP projects. So, at first, with the semi structured interviews and literature reviews, 47 failure factors were identified. After that a questionnaire developed and sent to ERP project team members in Iranian industries that failed in their ERP projects. Robust Exploratory Factor Analysis (EFA) has been used for data analysis, which finally classified critical failure factors in seven groups named as vendor and consultant, human resources, managerial, project management, processes, organizational and technical. The results of this study have provided a very useful reference for scholars and managers to identify the relevant issues of ERP projects failure in developing countries.     

Probabilistic approach to multi-objective Volt/Var control of distribution system considering hybrid fuel cell and wind energy sources using Improved Shuffled Frog Leaping Algorithm

Deregulation and restructuring in power systems, the ever-increasing demand for electricity, and concerns about the environment are the major driving forces for using Renewable Energy Sources (RES). Recently, Wind Farms (WFs) and Fuel Cell Power Plants (FCPPs) have gained great interest by Distribution Companies (DisCos) as the most common RES. In fact, the connection of enormous RES to existing distribution networks has changed the operation of distribution systems. It also affects the Volt/Var control problem, which is one of the most important schemes in distribution networks. Due to the intermittent characteristics of WFs, distribution systems should be analyzed using probabilistic approaches rather than deterministic ones. Therefore, this paper presents a new algorithm for the multi-objective probabilistic Volt/Var control problem in distribution systems including RES. In this regard, a probabilistic load flow based on Point Estimate Method (PEM) is used to consider the effect of uncertainty in electrical power production of WFs as well as load demands. The objective functions, which are investigated here, are the total cost of power generated by WFs, FCPPs and the grid; the total electrical energy losses and the total emission produced by WFs, FCPPs and DisCos. Moreover, a new optimization algorithm based on Improved Shuffled Frog Leaping Algorithm (ISFLA) is proposed to determine the best operating point for the active and reactive power generated by WFs and FCPPs, reactive power values of capacitors, and transformers’ tap positions for the next day. Using the fuzzy optimization method and max-min operator, DisCos can find solutions for different objective functions, which are optimal from economical, operational and environmental perspectives. Finally, a practical 85-bus distribution test system is used to investigate the feasibility and effectiveness of the proposed method.     

Reversible Control of Gelatin Hydrogel Stiffness by Using DNA Crosslinkers**

Biomaterials with dynamically tunable properties are critical for a range of applications in regenerative medicine and basic biology. In this work, we show the reversible control of gelatin methacrylate (GelMA) hydrogel stiffness through the use of DNA crosslinkers. We replaced some of the inter-GelMA crosslinks with double-stranded DNA, allowing for their removal through toehold-mediated strand displacement. The crosslinks could be restored by adding fresh dsDNA with complementary handles to those on the hydrogel. The elastic modulus (G’) of the hydrogels could be tuned between 500 and 1000 Pa, reversibly, over two cycles without degradation of performance. By functionalizing the gels with a second DNA strand, it was possible to control the crosslink density and a model ligand in an orthogonal fashion with two different displacement strands. Our results demonstrate the potential for DNA to reversibly control both stiffness and ligand presentation in a protein-based hydrogel, and will be useful for teasing apart the spatiotemporal behavior of encapsulated cells.     

Multi carrier energy systems and energy hubs: Comprehensive review,survey and recommendations

In this paper, the multi carrier energy (MCE) systems are reviewed from different point of views including mathematical models, integrated components and technologies, uncertainty management, planning objectives, environmental pollution, resilience, and robustness. The basic of MCE systems is formed by combination of cooling, heating and power (CCHP). The natural gas and electricity are the main inputs to MCE systems and the cooling, heating, and electricity are the common outputs. The regular energy converters in the MCE systems are combined heat and power (CHP), gas boiler, absorption-electrical chillers, power to gas (P2G) and fuel-cell. The generic energy storages are electrical, heating, cooling, hydrogen, carbon dioxide (CO₂) and hydro systems.     

Solving non-convex economic dispatch problem with valve point effects using modified group search optimizer method

This paper presents a novel solution based on the group search optimizer (GSO) methodology in order to determine the feasible optimal solution of the economic dispatch (ED) problem considering valve loading effects. The basic disadvantage of the original GSO algorithm is the fact that it gives a near-optimal solution rather than an optimal one in a limited runtime period. In this paper, a new modified group search optimizer (MGSO) is presented for improving the scrounger and ranger operators of GSO. The proposed MGSO is applied on different test systems and compared with most of the recent methodologies. The results show the effectiveness of the proposed method and prove that MGSO can be applicable for solving the power system economic load dispatch problem, especially in large scale power systems.