Towards a super-resolution based approach for improved face recognition in low resolution environment

Multimedia Tools and Applications - The video surveillance activity generates a vast amount of data, which can be processed to detect miscreants. The task of identifying and recognizing an object...     

QoS-Aware Optical Fog-Assisted Cyber-Physical System in the 5G Ready Heterogeneous Network

Wireless Personal Communications - In recent years, the emergence of Internet of things and cyber-physical system provide a proactive and efficacious solution to enable remote monitoring, machine...     

Spray dryer processed graphene oxide/reduced graphene oxide for high-performance supercapacitor

This study deals with the utility of mini spray dryer process to improve the dispersibility, of graphene oxide(GO) and its application for high-performance supercapacitor. Initially, the neutral solution of GO was obtained using the modified Hummer's method. After this, the prepared GO solution was processed by mini spray dryer to obtain a more purified, lighter, and dispersed form of GO which is named as spray dryer processed GO (SPGO). The SPGO thus obtained showed excellent dispersibility behavior with various solvents, which is not found in case of conventional oven drying. Furthermore, utility of SPGO and its reduced form (r-SPGO) for supercapacitor applications have been investigated. Results obtained from the cyclic voltammetry(CV) analysis, impedance, and charge-discharge behavior of supercapacitor fabricated using r-SPGO shows enhanced features. Therefore, the simple spray dried GO and its reduced form, that is, r-SPGO can be utilized as a potential candidate for the supercapacitor application. Herein, as synthesized SPGO exhibited the specific capacitance of 12.07 and 37.6 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively, at a scan rate of 5 mV/s. On the other hand, reduced form of SPGO, that is, r-SPGO showed the specific capacitance of 27.16 and 230 F/g with PVA-H₃PO₄ and 1 mol/L H₃PO₄, respectively.     

Corrosion Behavior of 316LN and 316 Stainless Steels During Long-term Exposure to Aerated 0.5 M NaCl Using Electrochemical Noise Technique

In the present work 316LN as well as 316 stainless steel (SS) coupons each of dimensions (0.025 × 0.018 × 0.006 m³) in well-polished condition were used as two nominal electrodes which were immersed in the aerated solution of 0.5 M NaCl. Correlated current and potential electrochemical noise (EN) signals were collected at 1 Hz sampling frequency for 1 h daily over a period of 30 days. The detrended EN data were used to calculate the noise resistance (R _N) as well as the spectral noise resistance at zero frequency (R _SN^o) values and other statistical parameters. To study the nature of pits and distribution of their diameters as well as depths, extensive observations of the pitted and the blank specimens were carried out using Confocal Laser Scanning Microscopy (CLSM). The current and the potential records of the two alloys showed distinct differences in their corrosion behavior. It was observed that within less than 4 h of immersion, 316SS showed signals indicative of unstable pitting and onset of stable pitting was noticed after 48 h of exposure. However, until about 24 h, 316LN showed just the random signals and unstable pitting was observed after 28 h. The signals clearly indicated continuous growth of the stable pits in 316SS as against the repassivation of the unstable pits in 316LN after 7 days exposure. It was observed that R _N values showed a continuous decrease in the case of 316SS, but were quite stable in the case of 316LN over the exposure period. Concurrent to these observations it was observed that 316SS specimen was extensively pitted. The frequency distributions of pit diameters as well pit depths were observed to be highest at 10-20 μm and 5-10 μm, respectively. However, pits with as large as 70-80 μm diameter and as deep as 20-25 μm too were observed. No pits were observed in case of 316LN even after 30 days of exposure, an observation that corroborates well with the stable R _N values. Thus, in the present investigation, the long-term tests using EN technique coupled with CLSM studies conclusively prove that many unstable pits initiated in 316SS turn into stable ones resulting in insidious localized corrosion attack whereas the unstable pits initiated in 316LN get passivated in the simulated coastal environment.     

Synthesis and characterization of poly(ethylene aspartate)-metal complexes

Poly(ethylene aspartate) [PEA] was synthesized by the melt condensation of D,L-aspartic acid and ethylene glycol. PEA containing pendent amino and carbonyl groups in its repeating chain was used as the polymeric ligand for complexation with transition metal ions, viz. Co(II), Ni(II), Cu(II), Mn(II), Zn(II), Cd(II), Ca(II), Mg(II), Pb(II) and Hg(II). Complexation was found to be most effective in DMSO. The resulting polyester-metal complexes were solid coloured materials which have been characterized by IR spectroscopy, elemental analysis and magnetic susceptibility measurements. The thermal stability of the polyester-metal complexes was investigated by thermogravimetric analysis (TGA). On the basis of the physico-chemical studies, an oxygen and nitrogen coordinated structure for the polyester-metal complexes is proposed.     

The nature of localized deformation in 6111-T6 aluminium alloy and polycarbonate

The nature of localized deformation that occurs both in metal and polymer samples was examined under uniaxial tension by measuring the complete strain distribution of a deforming specimen at a constant crosshead speed. The development of localized deformation in 6111-T6 aluminium alloy and polycarbonate was recorded along both the longitudinal and lateral directions as the specimen was stretched until it fractured. Determination of the true strain at various points on the tensile specimens was made by using an automated, vision-based image processing method using a CCD camera to measure the deformation of a silk-screened grid on the specimen. This vision-based system produced accurate results, allowing for careful analysis of the entire necking process from initiation to propagation. It has been observed that localized deformation develops principally in the longitudinal direction. The major and minor true strain are uniform for the uniform section specimens, however, these strains peak in the centre of the hourglass specimens in the longitudinal direction for both materials. For both specimen geometries, the major strain is uniform while the minor strain is non-uniform in the lateral direction. The longitudinal true strain to lateral true strain ratio remains at about two for the uniform section specimens, but this ratio increases to between 3 and 5 for the hourglass specimens, due to the constraining effect of the sample geometry.     

Test Generation for Crosstalk-Induced Faults: Framework and Computational Results

Due to technology scaling and increasing clock frequency, problems due to noise effects lead to an increase in design/debugging efforts and a decrease in circuit performance. This paper addresses the problem of efficiently and accurately generating two-vector tests for crosstalk induced effects, such as pulses, signal speedup and slowdown, in digital combinational circuits. These noise effects can propagate through a circuit and create a logic error in a latch or at a primary output. We have developed a mixed-signal test generator, called XGEN, that incorporates classical static values as well as dynamic signals such as transitions and pulses, and timing information such as signal arrival times, rise/fall times, and gate delay. In this paper we first discuss the general framework of the test generation algorithm followed by computational results. Comparison of results with SPICE simulations confirms the accuracy of this approach.     

Zirconium-based intermetallics as heterogeneous catalysts for the fischer-tropsch reaction: I. Zr-Ni-Co catalysts

Alloys of the general formula Zr₅₀Ni_xCO_50-x, where 0 ≦x≧ 50, have been prepared and used in the temperature range 300–400°C, in the pressure range 1–9 barg in a microtubular reactor for the reaction of hydrogen with carbon monoxide to give hydrocarbons. The alloys or intermetallic materials were prepared by argon arc melting, powdered by hydrogen decrepitation and characterised by means of optical microscopy (metallography), scanning electron microscopy with surface analysis and magnetic susceptibility measurements. The selectivity towards higher hydrocarbons increased with (i) increase in the total pressure and (ii) decrease in hydrogen content of the feed gases. The kinetics were found to be of the form: where m = 1.0 ± 0.2 and n = 0. The apparent energy of activation (E_a) lay in the range of 80–130 kJ mole^?1 and there appeared to be a compensation effect between E_a and the pre-exponential factor A. The turnover numbers for the reaction exhibited an activity maximum for alloys of composition around Zr₅₀Ni₄₀Co₂₀ and Zr₅₀Ni₃₀Co₂₀. Magnetic susceptibility measurements indicated that alloys changed their nature from moderately paramagnetic to strongly paramagnetic or even ferromagnetic after use and this is attributed to the conversion of zirconium to zirconium oxide during reaction with the attendant production of free 3d-transition metals. Derived catalysts prepared by air treatment of the hydrogen-decrepitated intermetallics behaved almost identically to the latter materials and gave similar magnetic susceptibility values to used hydrided materials.     

Glass fiber-reinforced epoxy composites

Glass fiber-reinforced epoxy composites were prepared from the matrix resins tetraglycidyl diaminodiphenylmethane

1 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-diaminodiphenylmethane.

(TGDDM) and tetraglycidyl bis(o-toluidino)-methane

2 Systematic name: N,N,N′,N′-Tetrakis(2,3-epoxypropyl)-4,4′-bis(o-toluidino)methane.

(TGMBT) using various amines like 4,4′-diaminodiphenylmethane (DDM), 4,4′-diaminodiphenylsulfone (DDS) and diethylene triamine (DETA) as curing agents. The fabricated laminates were evaluated for their mechanical and dielectrical properties and chemical resistance. The composites prepared using an epoxy fortifier (20 phr) showed significant improvement in the mechanical properties.     

Electrochemical characteristics for redox systems at nano-honeycomb diamond

Electrochemical characteristics for several redox systems at diamond films with highly ordered nanometer-scale cylindrical pores (‘nano-honeycombs’) were examined with cyclic voltammetry (CV) and electrochemical impedance measurements. The cyclic voltammetric anodic-cathodic peak separations for these nano-honeycomb electrodes were in the same range as those for polished polycrystalline diamond films, indicating that the involvement of the oxygen-terminated surface of the nano-pore walls, which should give rise to large peak separations for certain redox couples was only slight. Moreover, the peak currents in the CV were not enhanced to the extent expected on the basis of the roughness factors of the nano-honeycomb films. Ac impedance plots results indicated the existence of a concentration gradient of the reactant in the nano-pores, which is in agreement with theoretical predictions for charge transfer reactions in porous electrodes. The average concentration of the reactant (Fe^2+/3+) inside the nano-pores was a factor of ca. 80 lower than that in the bulk electrolyte. The results of the impedance analysis also indicated an increase in the reaction resistances with decreasing pore diameters.