Power efficient scheme for self localization in wireless sensor networks

With the tremendous applications of the wireless sensor network, self-localization has become one of the challenging subject matter that has gained attention of many researchers in the field of wireless sensor network. Localization is the process of assigning or computing the location of the sensor nodes in a sensor network. As the sensor nodes are deployed randomly, we do not have any knowledge about their location in advance. As a result, this becomes very important that they localize themselves as manual deployment of sensor node is not feasible. Also, in WSN the main problem is the power as the sensor nodes have very limited power source. This paper provides a novel solution for localizing the sensor nodes using controlled power of the beacon nodes such that we will have longer life of the beacon nodes which plays a vital role in the process of localization as it is the only special nodes that has the information about its location when they are deployed such that the remaining ordinary nodes can localize themselves in accordance with these beacon node. We develop a novel model that first finds the distance of the sensor nodes then it finds the location of the unknown sensor nodes in power efficient manner. Our simulation results show the effectiveness of the proposed methodology in terms of controlled and reduced power.     

Morphological, thermal and annealed microhardness characterization of gelatin based interpenetrating networks of polyacrylonitrile: A hard biopolymer

The present paper reports the preparation of full IPNs of gelatin and polyacrylonitrile. Various compositions of gluteraldehyde crosslinked gelatin and N,N′-methylene-bis-acrylamide crosslinked PAN were characterized by SEM and DSC techniques. The IPNs were also thermally pretreated by the annealing process. The effects of annealing temperature on the microhardness of IPNs were studied using the Vickers method. SEM indicates the homogeneous morphological features for IPN. The role of gelatin, AN and crosslinker on the developed hard biopolymer has been described with the help of DSC thermograms and microhardness measurements of annealed specimens and good correlation is observed.     

Effect of Pre-heat and Inert Gas Species on Cryogenic Aerosol Cleaning Performance in Semiconductor Manufacturing

Cryogenic aerosol cleaning is a dry cleaning method used in the back end of line (BEOL) semiconductor manufacturing to remove defects from planar hydrophobic surfaces such as SiCOH and SiCxNyHz. Cryogenic aerosol cleaning is preferred over conventional wet cleaning methods as it is a non-contact cleaning method, which uses inert gases to generate sub-micrometer-sized solid aerosol particles that physically remove nanometer-sized contaminants on wafer surfaces. Particle removal mechanism involves detachment of the particles upon impact with aerosol, diffusion, and finally entrainment away from the wafer. In BEOL metal line patterning, particles on the dielectric isolation surfaces translate through the subsequent lithography and copper fill steps in to single or multiple metal line open defects that are yield killers. In this study, we show that the particle removal performance of the standard aerosol cleaning can be enhanced by pre-heating the wafer and use of a higher molecular weight inert gas, namely Ar, for aerosol generation. Both the addition of a Pre-heat step and the use of Ar as the aerosol source showed 47–52% reduction in single and multiple line opens detected through wafer electrical tests during high volume semiconductor manufacturing process.     

Bioaccumulation of copper and toxic effects on feeding, growth, fecundity and development of pond snail Lymnaea luteola L

We studied the bioaccumulation and the toxic effects of Cu on survival, number of eggs and eggmasses laying, embryo development, growth, and food consumption in an Indian pond snail, Lymnaea luteola L. exposed for 7 weeks. Copper caused loss of chemoreception, locomotion and inhibited food consumption significantly during 7 weeks of exposure. Food consumption in Cu exposed snails significantly decreased and at 56 and 100 μg L(-1), snail stopped feeding activity. Mean number of eggmasses or eggs significantly decreased in Cu concentrations during the 7 week study. The percentage hatching decreased in Cu concentrations but there was more than 95% hatched in control in 10-11 days after spawning. Egg development was completely inhibited at 100 μg L(-1), while abnormal embryonic development observed at 32 and 56 μg L(-1) of Cu. The Cu concentration in tissues increased in Cu treated snails and bioaccumulation factor ranged from 2.3 to 18.7. Snail growth at 5.6 and 10 μg L(-1) was reduced by 6.2% and 16.9%, respectively. The study revealed that snail embryos and adults could be used as in vivo test models for ecotoxicological studies. Findings of present study are helpful for advancing water quality guidelines for protecting aquatic biota.     

Addition polyimides. I

Crosslinking of 4,4′(bismaleimido)diphenyl ether (BM) was investigated in presence of bis(m-aminophenyl)methylphosphine oxide (BAP), tris(m-aminophenyl)phosphine oxide (TAP), diaminodiphenyl ether (E) and 3,3-bis(p-aminophenyl)phthalide (AP). These crosslinked resins were examined for thermal stability by thermogravimetric analysis. A slight decrease in initial decomposition temperature, the temperature of maximum rate of weight loss, was observed, though the char yield in nitrogen atmosphere at 800°C did not change appreciably. Glass-cloth-reinforced laminates were fabricated from BM and amine mixtures. An improvement in mechanical properties was observed in the presence of phosphorus-containing di- and triamines.     

Vanadium Oxide Based Nanostructured Materials: Novel Oxidative Dehydrogenation Catalysts

Novel vanadium oxide based catalyst derived from the open-framework solid, [Co₃V₁₈O₄₂(H₂O)₁₂(XO₄)]·24 H₂O (X = V, S) (1) catalyses oxidative dehydrogenation of propane to propylene. Catalyst activity was evaluated in the temperature range 250–400 °C with varying gas hourly space velocity (GHSV). At 350 °C and GHSV of 9786 h^?1 and at 1.3% propane conversion the selectivity to propylene was 36.8%. The major products obtained were propylene and CO _x (CO₂ and CO). The ratio of the propylene to CO _x depended directly on the catalytic sites present. Thus, as the amount of the catalyst was decreased, the conversion decreased with an increase in the propylene selectivity and a decrease in the selectivity to carbon oxides—CO _x . The catalyst has been characterized by temperature programmed reduction and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS).     

Sputter deposition of self-organized nanoclusters through porous anodic alumina templates

Silver nanoparticles were sputter deposited through self organized hexagonally ordered porous anodic alumina templates that were fabricated using a two-step anodization process. The average pore diameter of the template was 90 nm and the interpore spacing was 120 nm. Atomic force microscope studies of the sputter-deposited silver nanoparticle array on a Si substrate indicate an approximate replication of the porous anodic alumina mask. The nature of the deposition depends strongly on the process parameters such as sputtering voltage, ambient pressure and substrate temperature. We report a detailed study of the sputtering conditions that lead to an optimal deposition through the template.     

Non-dairy Based Probiotics: A Healthy Treat for Intestine

Dairy-based fermented products and yoghurts have been utilized as potential probiotic products since ancient times. However, recent upsurge in interest of consumers towards dairy alternatives has opened up new vistas for non-dairy probiotic research and development. Various matrices and substrates such as cereals, fruit juices, or mixture thereof are being utilized for delivering these beneficial microorganisms. Each matrix offers some advantages over the other. Vast knowledge available on a number of conventional fermented foods can also be utilized for future research in this area. The present review provides an insight on the recent research/developments in the field of non-dairy probiotic foods with particular reference to the foods consumed conventionally, in addition to their commercial availability and a way forward.     

Utilization of Food Processing By-products as Dietary,Functional, and Novel Fiber: A Review

Fast growing food processing industry in most countries across the world, generates huge quantity of by-products, including pomace, hull, husk, pods, peel, shells, seeds, stems, stalks, bran, washings, pulp refuse, press cakes, etc., which have less use and create considerable environmental pollution. With growing interest in health promoting functional foods, the demand of natural bioactives has increased and exploration for new sources is on the way. Many of the food processing industrial by-products are rich sources of dietary, functional, and novel fibers. These by-products can be directly (or after certain modifications for isolation or purification of fiber) used for the manufacture of various foods, i.e. bread, buns, cake, pasta, noodles, biscuit, ice creams, yogurts, cheese, beverages, milk shakes, instant breakfasts, ice tea, juices, sports drinks, wine, powdered drink, fermented milk products, meat products and meat analogues, synthetic meat, etc. A comprehensive literature survey has been carried on this topic to give an overview in the field dietary fiber from food by-products. In this article, the developments in the definition of fiber, fiber classification, potential sources of dietary fibers in food processing by-products, their uses, functional properties, caloric content, energy values and the labelling regulations have been discussed.     

Loop‐Mediated Isothermal Amplification (LAMP): A Rapid and Sensitive Tool for Quality Assessment of Meat Products

Loop‐mediated isothermal amplification (LAMP) is a novel method that amplifies target nucleic acids under isothermal conditions. It is a rapid, specific, and sensitive method, which does not require costly thermal cyclers for the detection of nucleic acids. Thus, it is suitable for on‐site detection assays under low‐resource settings. It can also be integrated on compact lab‐on‐a‐chip devices for the development of micro‐total analysis systems. This review discusses LAMP‐based methods, as well as LAMP‐based centrifugal, microfluidic, and other fluid‐handling devices, which have been developed for the assessment of meat quality parameters that are related to the presence or absence of nucleic acids, for example, animal species identification and microbiological quality. Advances in improving the rapidity, specificity, and sensitivity of LAMP techniques for the assessment of these meat quality parameters are also discussed in this review.