Wollastonite/hydroxyapatite scaffolds with improved mechanical,bioactive and biodegradable properties for bone tissue engineering

Wollastonite/hydroxyapatite composite scaffolds are proposed as bone graft. An investigation on scaffold with varying reinforcing wollastonite content fabricated by polymeric sponge replica is reported. The composition, sintering behavior, morphology, porosity and mechanical strength were characterized. All the scaffolds had a highly porous well-interconnected structure. A significant increase in mechanical strength is achieved by adding a 50% wollastonite phase. The most mechanically resistant (50/50) wollastonite/hydroxyapatite scaffolds were soaked in both simulated body fluid (SBF) and Tris–HCl solution in order to assess bioactivity and biodegradability. A carbo-hydroxyapatite layer formed on their surfaces when immersed in SBF. The biodegradability tests reveals that the composite scaffold shows a higher degradation rate compared to pure hydroxyapatite used as comparison. These results demonstrate that the incorporation of a 50% of wollastonite phase in hydroxyapatite matrix is effective in improving the strength and the bioactive and biodegradable properties of the porous scaffolds.     

The parabrachial nucleus is essential for acquisition of a conditioned odor aversion in rats.

Rats with bilateral ibotenic acid lesions of the gustatory zone of the parabrachial nuclei (PBN) failed to acquire a conditioned taste aversion (CTA) in Exp 1. They also failed to acquire a conditioned odor aversion (COA) when the olfactory cue was presented on an odor disk in Exp 2 or when it was presented in water in Exp 3. The failure to acquire the COA was not due to an inability to detect or use olfactory stimuli because the lesioned rats displayed neophobia to a novel odor in Exp 3 and used an olfactory cue to predict the availability of an aversive capsaicin solution in Exp 4. Together, the results demonstrate that, as with CTA learning, PBN cell bodies are essential for the establishment of a specific association between an olfactory conditioned stimulus and a lithium chloride unconditioned stimulus. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Gustatory functions, sodium appetite, and conditioned taste aversion survive excitotoxic lesions of the thalamic taste area

Rats with bilateral, electrophysiologically guided, ibotenic acid lesions of the gustatory thalamus (THLX) were tested for their ability to perform a variety of taste-guided behaviors. First, in daily 30-min sessions, the rats were given repeated 10-s access periods to a range of concentrations of sucrose, NaCl, or QHCl, plus water. Both the control and the THLX rats exhibited similar concentration-response functions, regardless of hydrational state. Next, on 3 trials, the rats were given 15 min access to 0.3 M l-alanine and then injected with LiCl (0.15 M, 1.33 ml/100 g body weight ip). All rats learned a taste aversion following 1 pairing with LiCl. Finally, on 3 separate occasions, the rats were injected with furosemide, and Na(+)-appetite was evaluated 24 hr later. All rats expressed an equivalent sodium appetite after the first furosemide injection, but only the control rats increased intake of 0.51 M NaCl with repeated sodium depletions. These observations reinforce prior data implying that an intact gustatory thalamus is not necessary for the expression of some taste-guided behaviors.     

Diastereo‐ and Enantioselective Synthesis of trans‐2,3‐Disubstituted 2,3‐Dihydropyran‐4‐one Derivatives

trans‐Diastereoselective hetero‐Diels–Alder reactions took place in the presence of SiCl₄/activator systems. The reactions of aldehydes with a derivative of Danishefsky’s diene afforded the corresponding pyrones with high yields and diastereoselectivity upon activating SiCl₄ with suitable neutral Lewis bases. Aldol intermediates deriving from a Mukaiyama‐type pathway were isolated in many cases. The employment of a chiral activator allowed us to convert Danishefsky’s diene (or its disubstituted derivative) into both aldols and pyrones in good to high enantiomeric excesses.     

Development and characterization of cellulose‐based hydrogels for use as dietary bulking agents

In the last decade, cellulose‐based hydrogels have been receiving increasing attention for a number of applications because of their smart swelling behavior, biodegradability, and biocompatibility. Given the dramatic spreading of obesity and overweight in the industrialized countries and the lack of scientific consensus over currently available dietary supplements, it was recently proposed that such hydrogels might be used as orally administered bulking agents in hypocaloric diets, because the hydrogel swelling in the stomach may greatly reduce the space available for food intake, thus giving a sense of fullness. This study is focused on the synthesis of cellulose‐based hydrogels, starting from pharmaceutical and food grade cellulose derivatives, and shows that such hydrogels possess good swelling properties in water solutions mimicking the environmental conditions of the stomach and the intestine, as well as a good biocompatibility. The crosslinking agent used was a “zero‐length” crosslinker, that is, a water soluble carbodiimide, which is washed out from the gel after the synthesis and does not affect the gel compatibility, as shown by preliminary biocompatibility assays. The experimental results confirmed that cellulose‐based hydrogels might be a scientifically valid dietary adjuvant in the treatment of obesity and overweight, and provide further scientific evidence for future experiments on humans. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Dissolution behavior of 304 stainless steel in HNO3/HF mixtures

The dissolution behavior of type 304 stainless steel was studied in typical pickling environments in an effort to reduce the unnecessary loss of the critical metals nickel and chromium during the pickling process. Dissolution rates were determined for a 90-minute exposure to HNO₃/HF solutions ranging from 0.8 M to 3.5 M HNO₃ and 0.5 M to 2.6 M HF at 30°, 50°, 70°, and 90 °C and containing 0 to 0.21 M dissolved Fe, Cr, or Ni. Dissolution rates increased as a function of increasing HNO₃ concentration from 0.4 M to 1.5 M HNO₃, decreased at higher HNO₃ concentrations, and increased with increasing HF concentration. Experiments to determine the effect of temperature on the dissolution reaction gave a lower activation energy for solutions with higher HNO₃ concentrations. The dissolved Fe and Cr decreased the dissolution rate of 304 stainless steel, while dissolved Ni had essentially no effect. The Auger electron spectroscopy (AES) and X-ray photoelectron spectroscopy (XPS) studies of films resulting from exposure to several HNO₃/HF solutions indicated that the fluoride did not penetrate the thin nonprotective films but remained on the outer surface of the film. The scanning Auger microscopy (SAM) studies indicated that the fluoride was uniformly distributed over the surface. Both the dissolution and surface studies are consistent with a dissolution process which is controlled by reactions occurring either in solution or at the film-solution interface.     

Highly loaded hydroxyapatite microsphere/ PLA porous scaffolds obtained by fused deposition modelling

The goal of the work was the manufacturing of hydroxyapatite microsphere/polylactic acid (PLA) scaffolds by means of fused deposition modelling (FDM). Micrometer-sized hydroxyapatite spheres synthesized by spray drying (sdHA), were dispersed in PLA by extrusion compounding. Composite filaments were obtained from extrusion which were used in FDM 3D printing for the production of macroporous scaffolds. The sdHA microspheres were used in the composite in order to improve the biomimicry and the bioactivity of the 3D printed scaffold to increase the bone regeneration capacity. Morphological, thermal, physical and mechanical characterizations were performed on the 3D printed composites. Pure PLA scaffolds were 3D printed and used as a reference.Thermal analyses, TGA and DSC evidenced that the glass transition temperature and the degree of crystallinity of PLA were not influenced by the presence of sdHA. Morphological analysis showed a smooth surface of the printed samples when pure PLA was used. A rough surface was found on the PLA/sdHA composites, confirming, the homogeneous dispersion of the ceramic phase in the polymeric matrix. The higher porosity of the composite samples compared to PLA ones, most likely caused a decrease of the mechanical performances of the PLA/sdHA scaffolds. Composite scaffolds displayed stiffness values compatible with that of bone tissue.     

Gustatory detection thresholds after parabrachial nuclei lesions in rats.

Rats with either electrolytic (Experiment 1) or excitotoxic lesions (Experiment 2) that had been electrophysiologically centered in the gustatory zone of the parabrachial nuclei (PBN) were tested for sucrose and NaCl taste detection thresholds in a conditioned avoidance task. With 1 exception, all of these rats had previously shown severe deficits in acquiring an LiCl-based conditioned taste aversion (CTA) to sucrose, NaCl, or alanine. The rats with excitotoxic lesions also had failed to express a depletion-induced sodium appetite. Despite the uniformity of these deficits, the rats with lesions exhibited varied performance in the detectability task. Roughly ? of the rats did not perform competently, ? had elevated thresholds, and ? showed no or only marginal impairments in taste detectability. These findings demonstrate that the elimination of CTA following PBN lesions is not necessarily linked to an impairment in taste signal detection. Thus, PBN-induced deficits on 1 taste-related task do not entirely correspond with impairments on another. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Integrating security and privacy in software development

As a consequence to factors such as progress made by the attackers, release of new technologies and use of increasingly complex systems, and threats to applications security have been continuously evolving. Security of code and privacy of data must be implemented in both design and programming practice to face such scenarios. In such a context, this paper proposes a software development approach, Privacy Oriented Software Development (POSD), that complements traditional development processes by integrating the activities needed for addressing security and privacy management in software systems. The approach is based on 5 key elements (Privacy by Design, Privacy Design Strategies, Privacy Pattern, Vulnerabilities, Context). The approach can be applied in two directions forward and backward, for developing new software systems or re-engineering an existing one. This paper presents the POSD approach in the backward mode together with an application in the context of an industrial project. Results show that POSD is able to discover software vulnerabilities, identify the remediation patterns needed for addressing them in the source code, and design the target architecture to be used for guiding privacy-oriented system re-engineering.