Dynamical modelling of an activated sludge system of a petrochemical plant operating at high temperatures.

The Mexican petrochemical industry, Morelos S.A. de C.V., is one of the biggest and more important petroleum industries in Mexico and Latin America. It has an activated sludge system to treat its wastewater flow, which is approximately 7,000 m3/d. The wastewater contains volatile organic carbon substances classified as toxics. The old surface aeration system was changed for fine bubble diffusers; however, one major drawback of the new aeration system is that the temperature in the bioreactor has increased due to the compression of the air, which at the compressor exit reaches 85 degrees C. This effect results in the temperature in the bioreactor attaining 32 degrees C during the fall, whereas in the spring and summer, the bioreactor temperature reaches higher values than 40 degrees C. The high temperatures reduce the microorganism activity and cause a higher volatilisation rate of volatile compounds, among other effects, which affect the performance of the biological treatment. This work was performed to obtain a better modelling of the wastewater treatment from the petrochemical industry. The model describes the effect of the temperature on the performance of the biological treatment. The model was obtained from tests that were carried out in laboratory reactors with 14 L capacity, which were operated at different temperatures (from 30 to 45 degrees C), with the same wastewater and conditions as the actual system.     

A time series bootstrap procedure for interpolation intervals

A sieve bootstrap procedure for constructing interpolation intervals for a general class of linear processes is proposed. This sieve bootstrap provides consistent estimators of the conditional distribution of the missing values, given the observed data. A Monte Carlo experiment is used to show the finite sample properties of the sieve bootstrap and finally, the performance of the proposed method is illustrated with a real data example.     

Multiple antibiotic resistance in Stenotrophomonas maltophilia

A cryptic multidrug resistance (MDR) system in Stenotrophomonas maltophilia, the expression of which is selectable by tetracycline, is described. Tetracycline resistance was the consequence of active efflux of the antibiotic, and it was associated with resistance to quinolones and chloramphenicol, but not to aminoglycosides or beta-lactam antibiotics. MDR is linked to the expression of an outer membrane protein (OMP54) both in a model system and in multidrug-resistant clinical isolates.     

beta Recombinase catalyzes inversion and resolution between two inversely oriented six sites on a supercoiled DNA substrate and only inversion on relaxed or linear substrates

The beta recombinase, in the presence of a chromatin-associated protein such as Hbsu, catalyzes DNA resolution or DNA inversion on supercoiled substrates containing two directly or inversely oriented six sites. Hbsu stabilizes the formation of the recombination complex (Alonso, J. C., Weise, F., and Rojo, F. (1995) J. Biol. Chem. 270, 2938-2945). In this study we show that resolution by beta recombinase strictly requires supercoiled DNA, but inversion does not. On a substrate with two inversely oriented six sites, beta recombinase catalyzed both resolution and inversion if the DNA was supercoiled but only inversion if the substrate was relaxed or linear. Hbsu was critical for the formation of synaptic complexes; its concentration relative to that of the supercoiled DNA substrate determined whether resolution or inversion products were preferentially formed. The results suggest that the beta recombinase forms unproductive short-lived synaptic complexes between two juxtaposed inversely oriented six sites; the presence of 3 to 13 Hbsu dimers per supercoiled DNA molecule would stabilize a synaptic complex with a relative geometry of the six sites allowing beta recombinase preferentially to achieve resolution. Supercoiling probably helps to overcome an energetic barrier, since resolution does not occur in relaxed DNA. The presence of >30 Hbsu dimers per DNA molecule probably favors the formation of a recombination complex with a different geometry since the reaction is directed preferentially toward DNA inversion.     

A new method forin-situ measurement of electrical resistivity of reinforced concrete

A new method is described for thein-situ measurement of electrical resistivity of concrete structures. The method is based on the early work of J. Newman who calculated the electrolyte resistivity between a disk and a counter electrode located at infinity. This method has the advantage compared with Wenner's of using a single small electrode for the measurements. In this paper, results are presented comparing this method with Wenner's and with results carried out using a conductivity cell in electrolytes. Finally, values of resistivity are compared to corrosion intensity, and a threshold for active corrosion is suggested.

---

Résumé On décrit une nouvelle méthode de mesure de la résistivité électrique du béton dont la technique est basée sur un travail ancien de J. Newman qui avait calculé la résistivité entre un disque et une électrode auxiliaire placée à l'infini. Comparée à la méthode de Wenner, cette méthode présente l'avantage de n'utiliser, pour les mesures, qu'une petite électrode. Dans cet article, on présente les résultats de la comparaison établie avec la méthode de Wenner et avec les résultats obtenus avec une cellule de conductivité placée dans les électrolytes. Enfin, on compare les valeurs de la résistivité du béton avec celles de l'intensité de la corrosion et on suggère un seuil de corrosion active.

---

---

Editorial note Camen Andrade and Maria-Cruz Alonso are working at the Instituto Eduardo de Torroja which is a RILEM Titular Member. Dr. Andrade, who was the 1986 RILEM Medallist, have had all these years great responsibilities within RILEM. Chairlady of the Advisory Technical Committee until 1993, she is now a member of the Coordinating Committee. She is active in 116-PCD Technical Committee on Permeability of Concrete as a Criterion of its Durability and has been appointed chairdlady of 154-EMC Technical Committee on Electrochemical Techniques for Measuring Metallic Corrosion. Carmen Andrade has been appointed RILEM Fellow in 1995.     

Preparation of Poly(D,L-Lactide/Glycolide) Nanoparticles of Controlled Particle Size Distribution: Application of Experimental Designs

This study investigates the use of the solvent evaporation method for preparing acid and glycolic acid-based copolymer nanoparticles. Initially, appropriate technological and formulation factors for elaboration of polymeric particles were selected by screening. Most favourable results were obtained using polyvinyl alcohol as a dispersing agent and a high pressure homogenizer to reduce the droplet size of the emulsion initially formed. On the basis of the conclusion thus drawn, a composite rotational experimental design was employed to evaluate the joint influence of three formulation variables (phase volume ratio of the emulsion formed, polymer concentration and homogenization pressure) on the micromeritic properties of the suspension finally obtained (mean particle size, coefficient of variation and polydispersity of the particle size distribution). Analysis of variance corresponding to the experimental design, showed a significant influence of the volume phase ratio and the polymer concentration on the mean particle size and the coefficient of variation, whereas the polydispersity is also affected by the homogenization pressure. Considering this information, a 3² experimental factorial design was then selected to investigate the possible interaction between the phase volume ratio and the concentration of polyvinyl alcohol in the aqueous phase. Analysis of variance and subsequent sequencial regression analysis evidenced last hypothesis providing the way to determine the experimental conditions required to achieve a specific particle size distribution.     

Laterality, alternation, and perseveration relationships on the T-maze test.

The T-maze test has been used to study several entirely different issues: spontaneous alternation behavior (SAB), perseveration behavior (PB), and behavioral lateralization. Despite the fact that in this test the behavior studied is always the same one (i.e., side choice), the possible relationships among SAB, PB, and lateralization have not been previously evaluated. The present study investigated the relationships among these functions. The results demonstrated that (1) shock increases PB and lateralization decreases SAB, (2) practice increases lateralization and decreases SAB but does not modify PB, and (3) there are sex differences for alternation and SAB. Because these functions are expressed by the same behavioral pattern, they must be quantified simultaneously to avoid mistaken conclusions when the T-maze test is used. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Controlled-resistance loads for induction heating applications using thin non-magnetic metallic layers

The design of controlled-resistance loads for domestic induction heating applications using thin non-magnetic conductive layers is described. Thin metallic layers are fabricated using the phase vapour deposition technique. Such layers would enable vessels, the inductive behaviour of which was similar to those fabricated with conventional ferromagnetic bulk materials, to be manufactured. Optimum layer thickness is investigated using an analytical impedance model of the complete induction system