Dynamical modelling of an activated sludge system of a petrochemical plant operating at high temperatures.

The Mexican petrochemical industry, Morelos S.A. de C.V., is one of the biggest and more important petroleum industries in Mexico and Latin America. It has an activated sludge system to treat its wastewater flow, which is approximately 7,000 m3/d. The wastewater contains volatile organic carbon substances classified as toxics. The old surface aeration system was changed for fine bubble diffusers; however, one major drawback of the new aeration system is that the temperature in the bioreactor has increased due to the compression of the air, which at the compressor exit reaches 85 degrees C. This effect results in the temperature in the bioreactor attaining 32 degrees C during the fall, whereas in the spring and summer, the bioreactor temperature reaches higher values than 40 degrees C. The high temperatures reduce the microorganism activity and cause a higher volatilisation rate of volatile compounds, among other effects, which affect the performance of the biological treatment. This work was performed to obtain a better modelling of the wastewater treatment from the petrochemical industry. The model describes the effect of the temperature on the performance of the biological treatment. The model was obtained from tests that were carried out in laboratory reactors with 14 L capacity, which were operated at different temperatures (from 30 to 45 degrees C), with the same wastewater and conditions as the actual system.     

Effect of pretreatments and freezing rate on the firmness of potato tissue after a freeze–thaw cycle

The texture of potato tissue after a freeze–thaw process using different freezing rates and different pretreatments was analysed, in order to select the best strategy for optimum preservation of the textural characteristics of pre‐frozen potato. Ten blanching conditions were tested and a two‐step blanching process with calcium chloride (0.07 g mL^?1) proved the most effective in protecting the tissue after a freeze–thaw process (maximum load force around 10–55% of the raw tissue, depending on potato batch, for air‐blast freezing and 20–60% for immersion freezing). Vacuum impregnation at 100 and 400 mbar, even when followed by different pre‐drying treatments to remove excess water, was very detrimental to resistance to a freeze–thaw process (maximum load force below 10% of the raw tissue for air‐blast freezing and below 20% for immersion freezing). Microstructure analysis confirmed better tissue integrity retention with ethyleneglycol immersion freezing instead of air‐freezing. Differences were found between batches with a 6‐month difference in storage time, indicating that the fresher batch was more suitable for freezing.     

The k-simultaneous consensus problem

This paper introduces and investigates the k-simultaneous consensus task: each process participates at the same time in k independent consensus instances until it decides in any one of them. It is shown that the k-simultaneous consensus task is equivalent to the k-set agreement task in the wait-free read/write shared memory model, and furthermore k-simultaneous consensus possesses properties that k-set does not. In particular we show that the multivalued version and the binary version of the k-simultaneous consensus task are wait-free equivalent. These equivalences are independent of the number of processes. Interestingly, this provides us with a new characterization of the k-set agreement task that is based on the fundamental binary consensus problem.     

An experimental study on the applicability of evolutionary algorithms to craniofacial superimposition in forensic identification

Photographic supra-projection is a forensic process that aims to identify a missing person from a photograph and a skull found. One of the crucial tasks throughout all this process is the craniofacial superimposition which tries to find a good fit between a 3D model of the skull and the 2D photo of the face. This photographic supra-projection stage is usually carried out manually by forensic anthropologists. It is thus very time consuming and presents several difficulties. In this paper, we aim to demonstrate that real-coded evolutionary algorithms are suitable approaches to tackle craniofacial superimposition. To do so, we first formulate this complex task in forensic identification as a numerical optimization problem. Then, we adapt three different evolutionary algorithms to solve it: two variants of a real-coded genetic algorithm and the state of the art evolution strategy CMA-ES. We also consider an existing binary-coded genetic algorithm as a baseline. Results on several superimposition problems of real-world identification cases solved by the Physical Anthropology lab at the University of Granada (Spain) are considered to test our proposals.     

Neurotrophic control of ovarian development

Substantial evidence now exists indicating that the neurotrophins, a family of growth factors required for the survival, development, and differentiation of various neuronal populations of the nervous system, are also important for the development of nonneuronal tissues. Such a function was first suggested by studies showing the presence of high-affinity neurotrophin receptors in a variety of nonneuronal tissues including those of the cardiovascular, endocrine, immune, and reproductive systems. Within the latter, the gonads appear to be a preferential site of neurotrophin action as suggested by the presence in the mammalian ovary of at least four of the five known neurotrophins and all of the neurotrophin receptors thus far identified. While the various functions that the neurotrophins may have in the ovary are still being elucidated, it is now clear that in addition to recruiting the ovarian innervation, they play a direct role in the regulation of two different maturational periods that are critical for the acquisition of female reproductive function: early follicular development and ovulation. Neurotrophins facilitate the development of newly formed follicles by promoting the initial differentiation and the subsequent growth of primordial follicles. These actions appear to be related to the ability of neurotrophins to sustain the proliferation of both mesenchymal and granulosa cells, and to induce the synthesis of follicle stimulating hormone (FSH) receptors. At the time of the first ovulation, neurotrophins contribute to the ovulatory cascade by increasing prostaglandin E(2) release, reducing gap junction communication, and inducing cell proliferation within the thecal compartment of preovulatory follicles.     

Li4SiO4 pebbles reduction in He + 0.1% H2 purge gas and effects on tritium release properties

Lithium orthosilicate reduction was examined by Temperature Programmed Reaction (TPR) and Temperature Programmed Desorption (TPD) methods performed in He (or Ar) + H₂ purge gas flowing through pebble bed specimens. The parameters governing the kinetics and the steady-state of the reduction process to Li₄SiO_4−x were determined at 800°C. The level x of the O-vacancy concentration at steady-state (of the order of 1.5×10⁻³ mole fraction) was found to be compatible with the impurities content in the specimens. Pebble pre-annealing treatments were found to affect the microstructure and the reduction mechanism. Post-irradiation tritium release by TPD tests were performed on both stoichiometric and reduced pebbles with similar results. Tritium release properties of this breeder system seem to be independent from the material reduction state (x).     

Polymerizable Skin Hydrogel for Full Thickness Wound Healing

The skin is the largest organ in the human body, comprising the main barrier against the environment. When the skin loses its integrity, it is critical to replace it to prevent water loss and the proliferation of opportunistic infections. For more than 40 years, tissue-engineered skin grafts have been based on the in vitro culture of keratinocytes over different scaffolds, requiring between 3 to 4 weeks of tissue culture before being used clinically. In this study, we describe the development of a polymerizable skin hydrogel consisting of keratinocytes and fibroblast entrapped within a fibrin scaffold. We histologically characterized the construct and evaluated its use on an in vivo wound healing model of skin damage. Our results indicate that the proposed methodology can be used to effectively regenerate skin wounds, avoiding the secondary in vitro culture steps and thus, shortening the time needed until transplantation in comparison with other bilayer skin models. This is achievable due to the instant polymerization of the keratinocytes and fibroblast combination that allows a direct application on the wound. We suggest that the polymerizable skin hydrogel is an inexpensive, easy and rapid treatment that could be transferred into clinical practice in order to improve the treatment of skin wounds.