InP D-HBT ICs for 40-Gb/s and higher bitrate lightwave transceivers

The combination of device speed (f/sub T/, f/sub max/ > 150 GHz) and breakdown voltage (V/sub bceo/ > 8 V) makes the double heterojunction bipolar InP-based transistor (D-HBT) an attractive technology to implement the most demanding analog functions of 40-Gb/s transceivers. This is illustrated by the performance of a number of analog circuits realized in an InP D-HBT technology with an 1.2- or 1.6-/spl mu/m-wide emitter finger: a low phase noise push-push voltage-controlled oscillator with -7-dBm output power at 146 GHz, a 40-GHz bandwidth and low-jitter 40-Gb/s limiting amplifier, a lumped 40-Gb/s limiting driver amplifier with 4.5-V/sub pp/ differential output swing, a distributed 40-Gb/s driver amplifier with 6-V/sub pp/ differential output swing, and a number of distributed preamplifiers with up to 1.3-THz gain-bandwidth product.     

Effects of Al3+ and Be2+ ions combined with NaF on ciliary process adenylyl cyclase activity and aqueous humor dynamics in the rabbit eye

PURPOSE: The activity of Al3+, Ga3+, and Be2+ ions in the presence of NaF to directly activate G-proteins was investigated by their potentiative effect on forskolin (FSK)-activated adenylyl cyclase in rabbit ciliary process membranes and their effects on aqueous humor dynamics in vivo. METHODS: Adenylyl cyclase (AC) was determined by radiometric conversion of ATP to cAMP by the particulate fraction of rabbit ciliary processes. Intravitreal injections of sterile solutions of analytical grade salts were made into the center of the vitreous in a volume of 20 microliters. Intraocular pressure, aqueous humor flow, and uveoscleral outflow measurements were made by pneumatonometry, fluorophotometry, and fluorescein-dextran method, respectively. Outflow facility was determined by tonography in the intact eyes and by two-level constant pressure perfusion in cannulated eyes. RESULTS: Both Al3+ (EC50, 40 mumol/l) and Be2+ (EC50, 11 mumol/l) in the presence of 0.5-2 mM NaF activated the stimulatory G-protein Gs. Ga3+ was ineffective and did not antagonize the activation by Al3+. Intravitreal injections of Al3+ (1 mumol/eye) or Be2+ (0.5 or 1 mumol/eye) had no significant intraocular pressure (IOP) effect, nor did 1.5 or 3 mumol/eye of NaF, but when either cation was injected together with NaF, IOP decreased by up to 40% for up to 140 hr. At the time of maximum IOP effect (72 hr) aqueous humor flow determined by fluorophotometry was decreased in BeCl2+ NaF-treated eyes by 40% relative to BeCl2-treated eyes; however, tonographic facility of outflow was unaffected. Uveoscleral flow was also decreased by 38% in BeCl2+ NaF treated eyes. CONCLUSIONS: These findings support the hypothesis that Gs activation of ciliary process adenylyl cyclase decreases aqueous humor formation rate in rabbit eyes, and that activation of G-proteins mediates contraction of ciliary muscles causing a decrease of aqueous humor outflow via the uveoscleral route. The results suggest that G-proteins putatively involved in trabecular facility changes are less sensitive to activation by BeF3- than are other parameters of aqueous humor dynamics.     

Field observations on the occurrence of new indicators of disinfection efficiency

This paper summarizes studies on the presence of acid-fast and yeast organisms in wastewater and water treatment plants and in surface water. These organisms were found to satisfy three of Bonde's criteria for indicator organisms: presence whenever pathogens are likely to be present; resistance at least equal to that of pathogens; and lack of regrowth in the post-treatment environment. This, plus prior data, indicates that these organisms are at least as acceptable as indicators of disinfection efficiency than the coliform group.     

Über die Bildung des Kakaoaromas aus seinen Vorstufen

Formation of Cocoa Aroma from Its Precursors Isolation and chemical composition of a highly purified mixture of aroma-precursors from raw cocoa were extensively studied and the alterations due to heating at roasting temperatures were followed quantitatively. Cocoa aroma is formed in the course of a Maillard reaction between amino acids and reducing sugars. Participation of oligopeptides in the alterations that are specific for the process of roasting could be detected for the first time. From the high-boiling components present in the reaction product, a fraction having the typical cocoa flavour could be isolated and resolved by gas chromatography. The consequences of these observations on the technology of roasting of cocoa are discussed.     

Dealing with midair collisions in dense collective aerial systems

The idea of creating collective aerial systems is appealing because several rather simple flying vehicles could join forces to cover a large area in little time in applications such as monitoring, mapping, search and rescue, or airborne communication relays. In most of these scenarios, a fleet of cooperating vehicles is dispatched to a confined airspace area and requested to fly close to a nominal altitude. Moreover, depending on the task each vehicle is assigned to, individual flight trajectories in this essentially two‐dimensional space may interfere, resulting in disastrous collisions. This paper begins by introducing a probabilistic model to predict the rate of midair collisions that would occur if nothing is done to prevent them. In a second step, a control strategy for midair collision avoidance is proposed, which is interesting because it requires only local communication and information about flight altitudes. The proposed strategy is systematically analyzed in theory and simulation as well as in experiments with five physical aerial vehicles. A significant reduction in collision rates can be achieved. Statistically, values close to zero are possible when the swarm's density is below an application‐dependent threshold. Such low collision rates warrant an acceptable level of confidence in collision‐free operation of a physical swarm. © 2011 Wiley Periodicals, Inc.     

Nanotextures of composites based on the interaction between hydroxyapatite and cellulose Gluconacetobacter xylinus

Organic-inorganic composite materials with different nanotextures have been prepared using three methods based on two nanosized and biocompatible compounds—cellulose Gluconacetobacter xylinus (CGX) and hydroxyapatite Ca₅(PO₄)₃OH (HA). The structure of the initial components and their composites has been studied using the methods of X-ray diffraction, electron microscopy, and computer simulation. During the combined aggregation of aqueous HA and CGX suspensions, the phenomenon of their adsorption, in the process of which the axis c of HA crystals is oriented parallel to the plane (?110) of CGX microfibrillas, was observed. By varying the quantitative ratio of the components and the methods of introducing HA into composites, it is possible to obtain a wide spectrum of materials for medical practice.     

Fast analysis of rapeseed glucosinolates by near infrared reflectance spectroscopy

Industry and plant breeders require fast methods to analyze glucosinolates in rapeseed. We tested the potential of near infrared reflectance spectroscopy (NIRS) for this analysis and developed calibration equations on a large population of whole seeds. Reference methods used are high performance liquid chromatography (HPLC) and gas liquid chromatography (GLC) of desulphoglucosinolates, a glucose-release method after purification on an anion exchange column and a palladium test. In the range from 2 to 107 μM/g and after transformation of the data in first derivative, a correlation coefficient of 0.99 was observed, as well as standard errors of estimated values of 2.15, 2.52, 2.67 and 4.07 for samples analyzed by HPLC, GLC, glucose and the palladium test, respectively. With different wavelengths, a limited calibration test on seeds containing from 4 to 40 μM/g gives a standard error of 1.91 μM/g (HPLC).     

Direct-Push-Technologien – Effiziente Untersuchungsmethoden für die Untergrunderkundung

About ten years ago, Direct Push technologies were introduced in Germany as a “new” tool for subsurface characterization. Ever since, they have been frequently used in various fields of site investigations. However, despite over ten years of experience, their application potential is often perceived with scepticism. Closer consideration of the range of applications of this method shows that the technology is indeed being increasingly used, even though it does not seem to be completely accepted in the “consulting world”. This is surprising as Direct Push is already used in Germany in its simplest form—i.e. by percussion coring—on a routine basis. Nonetheless, the full potential of Direct Push has not yet been exploited. This article aims to provide a comprehensive overview on the state of the art of this technology and its various application potentials and limitations.