Enhancement of glass-ceramic performance by TiO2 doping: In vitro cell viability,proliferation, and differentiation

A new TiO₂-containing bioactive glass and glass-ceramics based on 50SiO₂-(45-X)CaO-(XTiO₂)-5P₂O₅ system was designed using a sol–gel technique (where X = 5, 7.5 and 10 wt %). The roles of the crystallization behavior and physicochemical characteristics of the designed glass and glass-ceramics which were played in the introduction of TiO₂ substitutions were investigated. Moreover, cell proliferation and differentiation were evaluated against human osteosarcoma cells (Saos-2). The TiO₂/CaO replacements led to the formation of a stronger glass structure and thus increased thermal parameters and the chemical stabilization of the designed materials. The FTIR data confirmed the existence of Ti within the glass and glass-ceramics samples, and no remarkable effect on their chemical integrity was observed. The XRD patterns indicated that calcium-containing minerals, including Ca₂SiO₄,Ca₃(PO₄)₂, Ca(Ti,Si)O₅, CaTiSiO₅, and Ca₁₅(PO₄)₂·(SiO₄)₆ phases were developed as a role of structure/texture under the applied heat-treatment. The results of the cytotoxicity test proved that a safe sample dose is 12–50 μg/ml, at which cell viability is ≥ 85%. The cell differentiation determined by ALP test proved the superiority of glass-ceramics compared with their native glasses. Therefore, the obtained materials could be safely used as novel biocompatible materials for the regeneration of bone tissue.     

A Full Connectable and High Scalable Key Pre-distribution Scheme Based on Combinatorial Designs for Resource-Constrained Devices in IoT Network

Considering the internet of things (IoT), end nodes such as wireless sensor network, RFID and embedded systems are used in many applications. These end nodes are known as resource-constrained devices in the IoT network. These devices have limitations such as computing and communication power, memory capacity and power. Key pre-distribution schemes (KPSs) have been introduced as a lightweight solution to key distribution in these devices. Key pre-distribution is a special type of key agreement that aims to select keys called session keys in order to establish secure communication between devices. One of these design types is the using of combinatorial designs in key pre-distribution, which is a deterministic scheme in key pre-distribution and has been considered in recent years. In this paper, by introducing a key pre-distribution scheme of this type, we stated that the model introduced in the two benchmarks of KPSs comparability had full connectivity and scalability among the designs introduced in recent years. Also, in recent years, among the combinatorial design-based key pre-distribution schemes, in order to increase resiliency as another criterion for comparing KPSs, attempts were made to include changes in combinatorial designs or they combine them with random key pre-distribution schemes and hybrid schemes were introduced that would significantly reduce the design connectivity. In this paper, using theoretical analysis and maintaining full connectivity, we showed that the strength of the proposed design was better than the similar designs while maintaining higher scalability.

     

The Impact of PbF2-Based Glasses on Radiation Shielding and Mechanical Concepts: An Extensive Theoretical and Monte Carlo Simulation Study

Journal of Inorganic and Organometallic Polymers and Materials - This work aimed to investigate the impact of Lead-fluoride based glasses via theoretical and simulation techniques on mechanical and...     

Capacity planning in job-shop environment

Presented here is a computerized capacity planning system for the IBM Microcomputer family. The system maintains the profile of the job shop in a data base along with data pertinent to various products that can be manufactured in the shop. Projected orders for the planning period are input to the system with their associated quantities and delivery dates. The system uses the forward and backward loading rules in generating capacity loading scenarios. User selects the best course of action which may satisfy delivery dates subject to the limitations of the work centers. Efficiency figures are provided to aid the user in his/her decision.     

An integrated methodology to control the risk of cardiovascular disease in patients with hypertension and type 1 diabetes

Today, air pollution, smoking, use of fatty acids and ready‐made foods, and so on, have exacerbated heart disease. Therefore, controlling the risk of such diseases can prevent or reduce their incidence. The present study aimed at developing an integrated methodology including Markov decision processes (MDP) and genetic algorithm (GA) to control the risk of cardiovascular disease in patients with hypertension and type 1 diabetes. First, the efficiency of GA is evaluated against Grey Wolf optimization (GWO) algorithm, and then, the superiority of GA is revealed. Next, the MDP is employed to estimate the risk of cardiovascular disease. For this purpose, model inputs are first determined using a validated micro‐simulation model for screening cardiovascular disease developed at Tehran University of Medical Sciences, Iran by GA. The model input factors are then defined accordingly and using these inputs, three risk estimation models are identified. The results of these models support WHO guidelines that provide medicine with a high discount to patients with high expected LYs. To develop the MDP methodology, policies should be adopted that work well despite the difference between the risk model and the actual risk. Finally, a sensitivity analysis is conducted to study the behavior of the total medication cost against the changes of parameters.     

Combustion synthesis of NbC/ZrO2 composites: Influence of Cr additives on the microstructure and mechanical properties

Composites of NbC/ZrO₂ reinforced with different weight ratios of Cr metal were prepared by dynamic compaction combustion from a blend of Nb₂O₅–Zr–Cr powders. Factors controlling the synthesis process, the microstructure, and the mechanical properties of the samples, such as Cr wt% and the compression loads were studied. The samples were characterized by XRD, SEM, porosity, and hardness measurements. The porosity value of the sample with no additives was high and reached 31.6 vol%. A sudden decrease in the sample porosity to 2.4 vol % was noticed for the sample containing 3.0 wt% of Cr. A high-density sample with less than 2.0 vol % porosity and maximum hardness of 1038 HV was produced using 5.0 wt% Cr under 300 MPa compression load. Detailed thermodynamic calculations for the effect of Cr additives on the physicochemical properties of the system were introduced.     

Printing cotton fabrics with reactive dyes of high reactivity from an acidic printing paste

The behaviour of reactive dyes of high reactivity during the printing process of 100% cotton fabrics from an alkaline and acidic printing paste was studied in detail. The printing pastes were stored for different periods of time and then the fabrics were printed. The samples were subjected to two methods of fixation, the first by steaming and the second by thermofixation. The effects of different factors such as alkali and acid concentration, storage time of the printing pastes and method of fixation on the K/S values of the prints were investigated. The fastness properties of the printed areas were also measured to determine the improvement obtained by acidic printing with high-reactivity reactive dyes on cotton fabrics.     

Alternating active-phase algorithm for multimaterial topology optimization problems: a 115-line MATLAB implementation

Structural and Multidisciplinary Optimization - A new algorithm for the solution of multimaterial topology optimization problems is introduced in the present study. The presented method is based on...     

Accelerating SPARQL queries by exploiting hash-based locality and adaptive partitioning

State-of-the-art distributed RDF systems partition data across multiple computer nodes (workers). Some systems perform cheap hash partitioning, which may result in expensive query evaluation. Others try to minimize inter-node communication, which requires an expensive data preprocessing phase, leading to a high startup cost. Apriori knowledge of the query workload has also been used to create partitions, which, however, are static and do not adapt to workload changes. In this paper, we propose AdPart, a distributed RDF system, which addresses the shortcomings of previous work. First, AdPart applies lightweight partitioning on the initial data, which distributes triples by hashing on their subjects; this renders its startup overhead low. At the same time, the locality-aware query optimizer of AdPart takes full advantage of the partitioning to (1) support the fully parallel processing of join patterns on subjects and (2) minimize data communication for general queries by applying hash distribution of intermediate results instead of broadcasting, wherever possible. Second, AdPart monitors the data access patterns and dynamically redistributes and replicates the instances of the most frequent ones among workers. As a result, the communication cost for future queries is drastically reduced or even eliminated. To control replication, AdPart implements an eviction policy for the redistributed patterns. Our experiments with synthetic and real data verify that AdPart: (1) starts faster than all existing systems; (2) processes thousands of queries before other systems become online; and (3) gracefully adapts to the query load, being able to evaluate queries on billion-scale RDF data in subseconds.