Interference management for spectral coexistence in a heterogeneous satellite network

With the advent of the fifth generation of mobile radio communication by 2020, there will be many challenges such as increasing service demand with low delay in providing billions of end users called the satellite mobile users. It is expected that terrestrial communication systems will be faced with a dense network having many small cells anywhere and anytime. Therefore, there are some remote regions in the world where terrestrial systems cannot provide any services to end users. Furthermore, because of lack of spectral resources, it is very important that the spectrum is shared between satellite systems and terrestrial equipment by a suitable solution to interference management. In this paper, a heterogeneous satellite network that includes low earth orbit (LEO) satellite constellation and terrestrial equipment is proposed to provide low delay services. In this type of structure, interference management based on transmission power control between LEO satellite systems and mobile users is very important for obtaining high throughput. Moreover, in order to mitigate interference, transmission power control is shown based on noncooperative Stackelberg game under many subgames through pricing‐based algorithm and convex optimization method. Finally, the simulation results show that the performance of this study's system model will be improved through the proposed algorithm.     

An efficient ontology-based topic-specific article recommendation model for best-fit reviewers

Scientometrics - In general peer review is accredited as the vital and utmost cornerstone of the scientific publishing and research developments. Undeniably, the reviewers play a decisive role in...     

Synthesis and characterization of poppy seed oil methyl esters

Response surface methodology(RSM) was used to determine the optimum conditions of the methanolysis of crude poppy seed oil using Na OCH3 as catalyst. The experiments were run according to five levels, four variable central composite rotatable design(CCRD) using RSM. The reaction variables, i.e., molar ratio of methanol/oil(3:1–9:1), catalyst concentration(0.5 wt%–1.25 wt% Na OCH3), reaction temperature(25–65 °C), and reaction time(20–90 min) were studied. We demonstrated that the molar ratio of methanol/oil, catalyst concentration,and reaction temperature were the significant parameters affecting the yield of poppy seed oil methyl esters(PSOMEs). The optimum transesterification reaction conditions, established using the RSM, which offered a89.35% PSOME yield, were found to be 7.5:1 molar ratio of methanol/oil, 0.75% catalyst concentration, 45 °C reaction temperature, and 90 min reaction time. The proposed process provided an average biodiesel yield of more than 85%. A linear correlation was constructed between the observed and predicted values of the yield.The gas chromatography(GC) analyses have shown that PSOMEs contain linoleic-, oleic-, palmitic-, and stearic-acids as main fatty acids. The FTIR spectrum of the PSOMEs was also analyzed to confirm the completion of the transesterification reaction. The fuel properties of the PSOMEs were discussed in light of biodiesel standards(ASTM D 6751 and EN 14214).     

Effect of guar gum on the serum lipid profile of Sprague Dawley rats

The aim of the study was to probe the hypocholesterolemic effect of legumes dietary fiber through “chapaties” a staple diet of the South Asia. Commercial wheat flour (atta) was blended with legumes i.e. lentil, chickpea and guar gum in various combinations to make composite flour for the preparation of chapaties. Maximum dietary fiber (8.85%) was observed in composite flour with 3g/100 g guar gum, which also gave whiter look and puffiness to the end product. Highest percent increase in dietary fiber (35.3%) was in flour with 3g/100 g guar gum followed by guar gum 2g/100 g (24.1%). The diets prepared from three best selected compositions along with control, were fed to male Sprague Dawley rats for 8 weeks. Lowest serum cholesterol (82.46 mg/dl) was observed in rats fed on guar gum 3g/100 g which showed a significant reduction (17.2%) as compared to control. Similarly, in case of LDL and triglycerides, guar gum 3 g/100 g showed highest decline i.e., 29.7% and 28.4% with reference to control, respectively. The present investigation suggests that five chapaties per day prepared from selected compositions provides an extra 5-8 g of dietary fiber that is helpful in lowering cholesterol in hypercholesterolemic individuals.     

Contrived approach to novel antibacterial poly(vinyl acetate-co-[2-(methacryloyloxy)ethyl]trimethylammonium chloride) and poly(vinyl acetate-co-[vinylbenzyl]trimethylammonium chloride) via RAFT polymerization with multi-characterization

Journal of Polymer Research - The complex and incompletely understood phenomenon of shear-induced crystallization of polymers may be nowadays analysed via the in situ POM-shear stage methodology....     

Fire retardant cellulose aerogel with improved strength and hydrophobic surface by one-pot method

Bio-based materials with multifunctional performance are getting immense attention nowadays for their environment friendly and renewable character. Inspired by toughening effect of graphene nanosheets and borate chemistry, a simple in-situ borate crosslinking in water and freeze-drying method was employed to fabricate a fire retarded bio-based aerogel. The structure of the material was evaluated and analysis by SEM, XRD, FTIR, Raman and XPS. Importantly, the bio-based aerogel has improved strength and adsorption properties due to unique structure. The compressive strength of rGO(reduced graphene oxide) + CMC (carboxymethyl cellulose) aerogel could reach 128 ± 2.1 kPa which is five times that of neat CMC aerogel. The bio-based aerogel can load more than 2500 times of self-weight. The adsorption capacity for organic solvents and oil of rGO+CMC aerogel is also greatly improved by a little rGO (1%) introducing due to its unique porous structure and hydrophobic nature of rGO. Additionally, rGO+CMC aerogel is also found fire resistant with relatively low thermal conductivity due to the borate and GO introduction.     

Synthesis and characterization of novel Pr6O11/Mn3O4 nanocomposites for electrochemical supercapacitors

This study presents the successful synthesis of praseodymium oxide, Pr₆O₁₁ and hausmannite manganese oxide, Mn₃O₄ nanoparticles, along with a novel synthesis of (Pr₆O₁₁/Mn₃O₄) nanocomposites by employing the hydrothermal route followed by post thermal annealing. X-ray Diffraction, Field Emission Scanning Electron Microscopy and Energy Dispersive X-ray characterization techniques are being adapted to analyze the physical characteristics of all the synthesized materials. XRD results reveal the crystalline nature of the synthesized materials. FE-SEM results display the irregular nanograins of Mn₃O₄ and a regular network of interconnected Pr₆O₁₁ nanoparticles. Nitrogen adsorption/desorption tests confirm the mesoporous nature of all the synthesized electrode materials. The Pr₆O₁₁/Mn₃O₄ ??2 electrode material exhibits an outstanding specific capacitance of 794.58?F/g at a current density of 0.5?A/g, as compared to the 521.24?F/g for the Pr₆O₁₁ electrode material. These investigations provide an easy and efficient method to develop nanocomposites (Pr₆O₁₁/Mn₃O₄) with better electrochemical characteristics, as electrode materials for supercapacitor applications.