Priority-based joint EDF–RM scheduling algorithm for individual real-time task on distributed systems

The Journal of Supercomputing - Multiple tasks arrive in the distributed systems that can be executed in either parallel or sequential manner. Before the execution, tasks are scheduled prioritywise...     

Hydration Study of the System Ca3Al2O6–CaSO4· 2H2O–Ca(OH)2–H2O with and without Citric Acid

Hydration occurring in the system Ca₃Al₂O₆–CaSO₄· 2H₂O–Ca(OH)₂–H₂O has been studied at different temperatures and it was found that the reactions are diffusion controlled. The kinetic data obeyed Jander's equation and the rate of reaction increased with increasing temperature. X-ray diffraction studies and calorimetric measurements show that when gypsum is consumed, ettringite is converted into monosulfate. The rate of this conversion also increased with the increasing temperature and decreased in the presence of citric acid. Spectroscopic studies showed that there was some interaction between citric acid and the cement and that the product of hydration is of colloidal nature. Zeta potential measurements show that retardation of Ca₃Al₂O₆ hydration in the presence of gypsum and Ca(OH)₂ is not due to SO²⁻₄ adsorption. Electrical conductivity and thermoelectric potential measurements of solid Ca₃Al₂O₆ show that Ca₃Al₂O₆ is an n -type semiconductor and contains defects. The retardation of Ca₃Al₂O₆ may be due to poisoning of reaction sites by gypsum and Ca(OH)_2.     

A Two-Step Filtering approach for detecting maize and soybean phenology with time-series MODIS data

The crop developmental stage represents essential information for irrigation scheduling/fertilizer management, understanding seasonal ecosystem carbon dioxide (CO₂) exchange, and evaluating crop productivity. In this study, we devised an approach called the Two-Step Filtering (TSF) for detecting the phenological stages of maize and soybean from time-series Wide Dynamic Range Vegetation Index (WDRVI) data derived from Moderate Resolution Imaging Spectroradiometer (MODIS) 250-m observations. The TSF method consists of a Two-Step Filtering scheme that includes: (i) smoothing the temporal WDRVI data with a wavelet-based filter and (ii) deriving the optimum scaling parameters from shape-model fitting procedure. The date of key crop development stages are then estimated by using the optimum scaling parameters and an initial value of the specific phenological date on the shape model, which are preliminary defined in reference to ground-based crop growth stage observations. The shape model is a crop-specific WDRVI curve with typical seasonal features, which were defined by averaging smoothed, multi-year WDRVI profiles from MODIS 250-m data collected over irrigated maize and soybean study sites.In this study, the TSF method was applied to MODIS-derived WDRVI data over a 6-year period (2003 to 2008) for two irrigated sites and one rainfed site planted to either maize or soybean as part of the Carbon Sequestration Program (CSP) at the University of Nebraska-Lincoln. A comparison of satellite-based retrievals with ground-based crop growth stage observations collected by the CSP over the six growing seasons for these three sites showed that the TSF method can accurately estimate the date of four key phenological stages of maize (V2.5: early vegetative stage, R1: silking stage, R5: dent stage and R6: maturity) and soybean (V1: early vegetative stage, R5: beginning seed, R6: full seed and R7: beginning maturity). The root mean square error (RMSE) of phenological-stage estimation for maize ranged from 2.9 [R1] to 7.0 [R5] days and from 3.2 [R6] to 6.9 [R7] days for soybean, respectively. In addition, the TSF method was also applied for two years (2001 and 2002) over eastern Nebraska to test its ability to characterize the spatio-temporal patterns of these key phenological stages over a larger geographic area. The MODIS-derived crop phenological stage dates agreed well with the statistical crop progress data reported by the United State Department of Agriculture (USDA) National Agricultural Statistics Service (NASS) for eastern Nebraska's three crop agricultural statistic districts (ASDs). At the ASD-level, the RMSE of phenological-stage estimation ranged from 1.6 [R1] to 5.6 [R5] days for maize and from 2.5 [R7] to 5.3 [R5] days for soybean.     

Global estimates of evapotranspiration and gross primary production based on MODIS and global meteorology data

The simulation of gross primary production (GPP) at various spatial and temporal scales remains a major challenge for quantifying the global carbon cycle. We developed a light use efficiency model, called EC-LUE, driven by only four variables: normalized difference vegetation index (NDVI), photosynthetically active radiation (PAR), air temperature, and the Bowen ratio of sensible to latent heat flux. The EC-LUE model may have the most potential to adequately address the spatial and temporal dynamics of GPP because its parameters (i.e., the potential light use efficiency and optimal plant growth temperature) are invariant across the various land cover types. However, the application of the previous EC-LUE model was hampered by poor prediction of Bowen ratio at the large spatial scale. In this study, we substituted the Bowen ratio with the ratio of evapotranspiration (ET) to net radiation, and revised the RS-PM (Remote Sensing-Penman Monteith) model for quantifying ET. Fifty-four eddy covariance towers, including various ecosystem types, were selected to calibrate and validate the revised RS-PM and EC-LUE models. The revised RS-PM model explained 82% and 68% of the observed variations of ET for all the calibration and validation sites, respectively. Using estimated ET as input, the EC-LUE model performed well in calibration and validation sites, explaining 75% and 61% of the observed GPP variation for calibration and validation sites respectively.Global patterns of ET and GPP at a spatial resolution of 0.5° latitude by 0.6° longitude during the years 2000-2003 were determined using the global MERRA dataset (Modern Era Retrospective-Analysis for Research and Applications) and MODIS (Moderate Resolution Imaging Spectroradiometer). The global estimates of ET and GPP agreed well with the other global models from the literature, with the highest ET and GPP over tropical forests and the lowest values in dry and high latitude areas. However, comparisons with observed GPP at eddy flux towers showed significant underestimation of ET and GPP due to lower net radiation of MERRA dataset. Applying a procedure to correct the systematic errors of global meteorological data would improve global estimates of GPP and ET. The revised RS-PM and EC-LUE models will provide the alternative approaches making it possible to map ET and GPP over large areas because (1) the model parameters are invariant across various land cover types and (2) all driving forces of the models may be derived from remote sensing data or existing climate observation networks.     

Deadlock free routing algorithms for irregular mesh topology NoC systems with rectangular regions

The simplicity of regular mesh topology Network on Chip (NoC) architecture leads to reductions in design time and manufacturing cost. A weakness of the regular shaped architecture is its inability to efficiently support cores of different sizes. A proposed way in literature to deal with this is to utilize the region concept, which helps to accommodate cores larger than the tile size in mesh topology NoC architectures. Region concept offers many new opportunities for NoC design, as well as provides new design issues and challenges. One of the most important among these is the design of an efficient deadlock free routing algorithm. Available adaptive routing algorithms developed for regular mesh topology cannot ensure freedom from deadlocks. In this paper, we list and discuss many new design issues which need to be handled for designing NoC systems incorporating cores larger than the tile size. We also present and compare two deadlock free routing algorithms for mesh topology NoC with regions. The idea of the first algorithm is borrowed from the area of fault tolerant networks, where a network topology is rendered irregular due to faults in routers or links, and is adapted for the new context. We compare this with an algorithm designed using a methodology for design of application specific routing algorithms for communication networks. The application specific routing algorithm tries to maximize adaptivity by using static and dynamic communication requirements of the application. Our study shows that the application specific routing algorithm not only provides much higher adaptivity, but also superior performance as compared to the other algorithm in all traffic cases. But this higher performance for the second algorithm comes at a higher area cost for implementing network routers.     

Passivation of pyrite due to surface treatment

Two samples of naturally occurring pyrite were treated with acetyl acetone, silanes, humic acids, lignin-NaOH mixture, and oxalic acid. The corrosion rate of pyrite was observed to decrease significantly due to the surface treatment by the chemicals used in this study. Surface characterization methods indicate that phenyl triacetoxy silane forms a passive coating a few Angstroms thick on the pyrite, thus preventing its dissolution in 1M H₂SO₄.     

Modelling and kinetic aspects of a BTEX contaminated air-treating biofilter

In this study, the overall performance of a biofilter was evaluated in terms of its elimination capacity by using 3-D mesh techniques. The overall results indicate that the agreement between experimental data and model predictions is excellent for benzene, toluene, ethylbenzene and o-xylene (BTEX). In this study, the maximum removal rate (r _max) values for BTEX were 0.0117, 0.0126, 0.0081 and 0.0146 g m^–3 h^–1, and the half-saturation constant (K_S ) values were calculated to be 0.269, 0.297, 0.156 and 0.394 g m^–3, respectively. For this system, the coefficients of determination (r ²) of BTEX compounds were greater than 0.97. The BTEX concentration profiles along the depth were also determined using a convection–diffusion reactor (CDR) model. The sums of squares of the errors (SSEs) of BTEX were 0.0078, 0.0059, 0.0129 and 0.0269, respectively, with r ² values greater than 0.99 for all four compounds at low concentrations.     

Synthesis of ethylene and butyl methacrylate-based copolymer by emulsion polymerization

The emulsion copolymerization of ethylene with butyl methacrylate (BMA) was carried out in an aqueous medium at 60 °C under moderate reaction conditions. The polymer system is well controlled with a linear increase in the molecular weight (M_n) versus ethylene feed pressure and narrow molecular weight distributions (>1.36) were observed throughout the copolymerization reaction. The spectroscopic analyses confirm the presence of acrylate functional as well as methylene group in the synthesized poly(ethylene-co-BMA) copolymer. Morphological behavior of poly(ethylene-co-BMA) has been studied using SEM and TEM analyses. Thermal stability of the copolymers was investigated by thermogravimetric analysis and it was observed that the copolymer is stable up to 380 °C. X-ray diffraction analysis confirmed the amorphous behavior of poly(ethylene-co-BMA). Dynamic light scattering measurement confirms the formation of poly(ethylene-co-BMA) nanoparticles. The particle size of copolymer nanoparticles were in the range of 85–108 nm with low polydispersity indexes (>0.2). The viscous and the elastic property of the copolymer were investigated and established that at high temperature elastic behavior predominant over viscous effect. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47994.