济钢105m^2带冷机综合密封节能降耗提高冷却效率的实践

由于烧结机扩容同时工艺优化去掉热筛后，使烧结矿的料层提高，热返矿进入带冷机超负荷运行料温持续偏高，并且带来台车漏风漏料扬尘，冷却风量效率低，烧损成品皮带等问题。通过采取综合密封及改进相关冷却方式，解决了以上存在的问题，并达到节能降耗的目的。     

The Bisphosphonate Clodronate Modifying Hydroxyapatite Bioceramics for Bone Scaffold

To investigate the efficiency of clodronate modifying HA bioceramics,and to evaluate the effect of clodronate modifying HA bioceramics on the cells in vitro,clodronate modified the porous HA bioceramics for bone scaffold by chelation .The outermost layer of the specimens was analyzd by XPS and FI-IR ,The depth profile was investigated by the argon-ion sputtering method.The cell culture test was conducted using MC3T3-E1 osteoblastic cells,The cells were inoculated and cultured on the scaffolds.Morphological observation of the cells,MTT test and ALP activity test evaluated the cell attachment ,proliferation and activity on the scaffolds.The cell culture test in cell quantity and morphology indicated active proliferation of the cells on the scaffolds.The ALP activity of the cells cultured for 3d and 7d on clodronate-HA bioceramics was slightly higher than that on HA bioceramics ,but the difference was not signifcant,This result indicated that clodronate-HA bioeramics had favorable cytocompatibility to be used as bone scaffold with potential ability to improve asteogensis.     

海洋软管增强层的选择及结合方式

当前输油管道软管的应用越来越广，尤其是陆上石油开采日趋贫乏，海庆石油开采比重将越来越大，势必将对海洋用软管的需求不断加大。而对海洋软管技术要求也不断提高，其中大多是针对软管内的增强层所提出的。论述了海洋软管增强层的结构形式、技术要求、材质选择等几方面内容，考察了不同增强层对海洋软管耐压性、耐蚀性、屈挠性、粘合性等指标的影响。     

气溶胶和氡浓度变化对氡子体影响的探讨

为了得到气溶胶变化后对氡子体产生的影响,实验通过气溶胶粒径谱仪SMPS测试氡室内不同浓度气溶胶,分析气溶胶的变化情况,根据AlphaGUARD测氡仪以及AlphaPM子体仪测试变化的氡浓度不同气溶胶下子体变化情况。实验结果表明：在两个NaCl浓度的气溶胶条件下,气溶胶的总量随着气溶胶发生器中的NaCl浓度的增大而变大,由于氡子体结合态随气溶胶浓度改变,氡子体浓度也随气溶胶浓度的增大而增大。并且在相同气溶胶浓度情况下,氡子体的浓度随着氡浓度的增大而增大。     

高匹配焊接接头裂纹的J积分研究

本文研究了含有纵向裂纹或缺陷的高匹配焊接接头材料不均匀性和焊缝宽度对弹塑性断裂表征参量J积分的影响规律.高匹配焊缝被理想化为含有一平行裂纹的一个硬夹层,其屈服应力高于母材.在平面应力条件下利用弹塑性有限元计算得到数值解.研究结果表明,材料不均匀性和焊缝宽度对J积分值有显著影响,特别当名义应力或名义应变较高时影响更大.因此,估算高匹配接头的裂纹推力时必须对此加以考虑.     

基于Agent的分布仿真平台原型系统设计与实现

基于Agent的分布仿真是基于Agent的建模与仿真ABMS(Agent-Based Modeling and Simulation)研究的重要组成部分。在提出的基于Agent的分布仿真软件框架和通信系统设计与实现的基础上,利用Java语言和面向对象的方法设计实现了一个基于Agent的分布仿真平台原型系统ADSimE。介绍了该分布式仿真平台的主要实现细节,给出了全系统的主要Agent类的UML设计,重点阐述了保守策略仿真Agent类和乐观策略仿真Agent类的设计、处理流程以及KQML消息解析的实现细节。最后以闭合排队网络为例,说明了怎样在该环境下进行基于Agent的分布仿真应用的开发。     

具有实时语音播报的超声波测距仪

以MSP430F149作为微控制器,使用了中心频率为40kHz的超声波传感器,通过信号转换、放大、检测来计算超声波传播时间以确定物体距离.     

PCI接口高速数据采集与处理卡的设计

利用可编程逻辑器件搭建了一个可编程的数据采集平台.     

芳香植物名录汇编（七）

世界上含有芳香物质的植物到底有多少种,众说不一,准确数字不明。我们根据数年来积累的国内外报道过的资料,经过整理汇编成《芳香植物名录》,内中涉及163科(Family)、756属(Genus)、约3300种(Species)(含个别变种Variety和变型forma)。编排方式是:同属植物的拉丁属名除该属第一个全写外,其余的则以属名开头第一个大写字母代表;属名后附有中文科名;一个属中的种名按拉丁字母顺序排列。错漏之处恳请指正。     

Nanoscale ZnS/TiO2 composites: Preparation, characterization, and visible-light photocatalytic activity

Photoactive ZnS/TiO₂ nanocomposites were prepared via microemulsion-mediated solvothermal method. The structure, composition, physicochemical property, and morphology of the composites were characterized by powder X-ray diffraction (XRD), Raman scattering studies, UV diffuse reflectance spectroscopy (UV/DRS), photoluminescence (PL) spectroscopy, and transmission electron microscopy (TEM). It showed that the composites were cube-shaped with particle sizes of 10 to 15 nm, and the phase structure for ZnS and TiO₂ in the composites was cubic and anatase, respectively. The content of the ZnS in the composites was 2.1%, 10.7%, and 19.9%, respectively. Compared with the solitary anatase TiO₂, the ZnS/TiO₂ exhibited enhanced visible-light photocatalytic activity for the aqueous parathion-methyl degradation. Factors including the interactions between the phases of ZnS and TiO₂, strong adsorption of the substrate at the surface of the ZnS/TiO₂ nanocomposites, and preassociation of the substrate and composites are responsible for this enhancement photocatalytic activity.