A CMOS multichannel 10-Gb/s transceiver

We describe a CMOS multichannel transceiver that transmits and receives 10 Gb/s per channel over balanced copper media. The transceiver consists of two identical 10-Gb/s modules. Each module operates off a single 1.2-V supply and has a single 5-GHz phase-locked loop to supply a reference clock to two transmitter (Tx) channels and two receiver (Rx) channels. To track the input-signal phase, the Rx channel has a clock recovery unit (CRU), which uses a phase-interpolator-based timing generator and digital loop filter. The CRU can adjust the recovered clock phase with a resolution of 1.56 ps. Two sets of two-channel transceiver units were fabricated in 0.11-/spl mu/m CMOS on a single test chip. The transceiver unit size was 1.6 mm /spl times/ 2.6 mm. The Rx sensitivity was 120-mVp-p differential with a 70-ps phase margin for a common-mode voltage ranging from 0.6 to 1.0 V. The evaluated jitter tolerance curve met the OC-192 specification.     

Efficiency of repeated batch penicillin fermentation using two fermentors. Computer simulation and optimisation

Repeated batch operation using two fermentors (RBTF) to penicillin fermentation was demonstrated by computer simulation to improve productivity. Three operation modes were compared: chemostat, repeated batch operation using a single fermentor (RBSF) and RBTF; in each case account was made of the lag period before growth. The simulated fermentor performances were assessed on the basis of the penicillin productivity and concentration; the simulation was based on published batch fermentation data. It was shown that RBTF was superior to RBSF and chemostat. The advantage of RBTF increased as the lag period became greater.     

Annual changes in serum vitellogenin concentrations in viviparous eelpout, Zoarces elongatus

Vitellogenin of matrotrophic viviparous eelpout (Zoarces elongatus) was purified from estradiol-17 beta (E2) treated immature male sera by gel chromatography and anion exchange chromatography. Isolated vitellogenin has a molecular weight of 540 kDa estimated by gel chromatography. Serum levels of vitellogenin in females were measured during oocyte development and gestation by single radial immunodiffusion. Serum vitellogenin level was low (less than 0.2 mg/ml) during the early vitellogenic period, increased in the late vitellogenic period to a peak level (6.4 +/- 2.1 mg/ml) at the beginning of gestation. After that it rapidly decreased to a low level (0.1 +/- 0.1 mg/ml) during the early gestation period. Levels of vitellogenin remained low throughout the gestation period. Serum E2 levels in females showed increased from 1.3 to 3.0 ng/ml during the late vitellogenic period, and declined to 0.4 ng/ml during the early gestation period. Serum levels of E2 showed good correlation with serum vitellogenin levels, suggesting that the vitellogenin synthesis is controlled by E2 in this species. These results combined with the matrotrophic growth of embryo during gestation suggest that there is a shift in the synthesis of maternal nutritional products for embryos from the yolk to other nutrients.     

Is it possible to differentiate between choledochal cyst and congenital biliary atresia (type I cyst) by antenatal ultrasonography?

Both choledochal cyst and congenital biliary atresia (type I cyst) may share the same ultrasonographic pattern. We report 2 cases which were shown to have cystic structures on the upper abdomen by antenatal ultrasonography. The size of the choledochal cyst found at 24 weeks' gestation increased steadily as gestational age advanced. But the size of the cyst in congenital biliary atresia found at 29 weeks' gestation remained unchanged throughout the remaining pregnancy. Cyst enlargement, therefore, may suggest the possibility of a choledochal cyst.     

Detection and modification of confusing color combinations for red‐green dichromats to achieve a color universal design

Color‐vision deficiency is a relatively common genetic condition, which often leads to the obstruction of necessary information in colored images. It is important to minimize such inconvenient effects in communication using colored images from a universal design perspective. The universal design principle stipulates that all environments and products should be usable by all people, regardless of age, physical attributes, and ability. This article proposes a method to detect color combinations in a given image that would confuse color dichromats, and suggests a way in which to modify them to make the image easily distinguishable for both normal and dichromatic observers. Confusing color combinations were detected based on a color‐difference calculation using simulations of how the color would appear to dichromats. The confusing colors were then modified based on the minimization of an evaluation function, which was defined as the sum of the degree of confusion and the degree of color change from the original image. Several colored images obtained by the proposed method were compared with the originals by red–green dichromatic observers who judged them to be clearer, thereby confirming that the proposed method was effective for color rendering for universal design. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 203–211, 2008     

Advanced Coatings on Furnace Wall Tubes

Nickel-based self-fluxing alloy coating extends the service life of furnace wall tubes at waste incineration plants due to its excellent corrosion resistance and heat resistance. Fusing of such coatings by induction heating offers improved efficiency and reliability of products. Compared with conventional plasma, flame, and high-velocity oxy-fuel spraying thermal-sprayed coatings, induction-fused coatings provide a far stronger metallurgical bond at the interface, while minimizing the inclusion of pores. In addition, the tubes are less costly than those with welded coatings, and the process reduces the distortion of the products, facilitating easier final assembly. A successful experimental application of 11 units in a waste incinerator revealed virtually no corrosion on the exposed surfaces, and showed an improved water heating efficiency over that of the original tubes. Such units are now being employed in four incinerators in Taiwan, and continuing tests are showing great promise.     

Mechanical Properties of Alumina/Silicon Carbide Whisker Composites

The improvement of mechanical properties of Al₂O₃/SiC whisker composites has been studied with emphasis on the effects of the whisker content and of the hot-pressing temperature. Mechanical properties such as fracture toughness and fracture strength increased with increasing whisker content up to 40 wt%. In the case of the high SiC whisker content of 40 wt%, fracture toughness of the sample hot-pressed at 1900° decreased significantly, in spite of densification, compared with one hot-pressed at 1850°. Fracture toughness strongly depended on the microstructure, especially the distribution of SiC whiskers rather than the grain size of the Al₂O₃ matrix.     

Time-series primitive static states for detailing work state and flow of human-operated work machine

This paper proposes a quantification method for a comprehensive work flow in construction work for describing work states in more detail on the basis of analyzing state transitions of primitive static states (PSS), which consist of 16 symbolic work states defined by using on-off state of the lever operations and joint loads for the manipulator and end-effector. On the basis of the state transition rules derived from a transition-condition analysis, practical state transitions (PST), which are common and frequent transitions in arbitrary construction work, are defined. PST can be classified into essential state transition (EST) or nonessential state transitions (NST). EST extracts common phases of work progress and estimates positional relations between a manipulator and an object. NST reveals wasted movements that degrade the efficiency and quality of work. To evaluate comprehensive work flows modeled by combining EST and NST, work-analysis experiments using our instrumented setup were conducted. Results indicate that all the PSS definitely changes on the basis of PST under various work conditions, and work analysis using EST and NST easily reveals work characteristics and untrained tasks related to wasted movements.     

Chemospecific ring-opening polymerization of α-methylenemacrolides

α-Methylenemacrolides having various groups, such as aromatic, ether, and amine, were enzymatically, anionically, and radically polymerized. The polymerization with the lipase catalyst successfully afforded polymers only through the ring-opening process, whereas the vinyl polymerizations selectively proceeded by using anionic and radical initiators. The polyesters obtained by the enzymatic polymerization have a polymerizable methacrylic methylene group in the main-chain, in addition to the aromatic and polar groups, and were further radically polymerized to quantitatively produce a cross-linked polymer gel.     

Synthesis of High-Purity Zirconium Fluoride for Fluoride Glass Fibers by Chemical Vapor Deposition

A technique for synthesizing ultra-high-purity ZrF₄ using chemical vapor deposition in a ZrBr₄–HF system is developed and a purification mechanism is clarified. The Fe concentration in ZrF₄ is evaluated at less than 10 ppb based on analysis of the transmission loss spectrum of a fiber prepared using synthesized ZrF₄. Purification is achieved mainly in a sublimation process of ZrBr₄, and purification efficiency is determined by sublimation temperature and activity of impurities in ZrBr₄. The concentration of transition-metal impurities in ZrF₄, synthesized by chemical vapor deposition in the ZrBr₄–HF system, is expected to be less than 1 ppb.