A 64-Mb DRAM with meshed power line

A 64-Mb dynamic RAM (DRAM) has been developed with a meshed power line (MPL) and a quasi-distributed sense-amplifier driver (qDSAD) scheme. It realizes high speed, t_RAS=50 ns (typical) at V_cc=3.3 V, and 16-b input/output (I/O). This MPL+qDSAD scheme can reduce sensing delay caused by the metal layer resistance. Furthermore, to suppress crosstalk noise, a V_SS shield peripheral layout scheme has been introduced, which also widens power line widths. This 64-Mb DRAM was fabricated with 0.4-μm CMOS technology using KrF excimer laser lithography. A newly developed memory cell structure, the tunnel-shaped stacked-capacitor cell (TSSC), was adapted to this 64-Mb DRAM     

Diffusion Bonded EDM Electrode with Micro Holes for Jetting Dielectric Liquid

This paper describes improvement of machining characteristics of electrical discharge machining of deep slots using a tool electrode which has micro holes for jetting dielectric liquid over the working surface. The tool electrode was made by the diffusion bonding of two copper plates, over an interface on which micro grooves for jetting the dielectric fluid were formed using electrolyte jet machining. In conventional machining, it is difficult to drill micro holes at the end of a slim electrode and circulate the dielectric fluid from the other end. Hence a solid tool electrode is used and periodically lifted up during machining to flush debris particles out of the discharge gap. Use of the newly developed tool electrode was found to shorten the processing time and improve machining accuracy significantly compared with the conventional solid tool electrode. Since the holes are micro, the outlet shapes are not replicated onto the bottom surface of the slot machined.     

Detection and modification of confusing color combinations for red‐green dichromats to achieve a color universal design

Color‐vision deficiency is a relatively common genetic condition, which often leads to the obstruction of necessary information in colored images. It is important to minimize such inconvenient effects in communication using colored images from a universal design perspective. The universal design principle stipulates that all environments and products should be usable by all people, regardless of age, physical attributes, and ability. This article proposes a method to detect color combinations in a given image that would confuse color dichromats, and suggests a way in which to modify them to make the image easily distinguishable for both normal and dichromatic observers. Confusing color combinations were detected based on a color‐difference calculation using simulations of how the color would appear to dichromats. The confusing colors were then modified based on the minimization of an evaluation function, which was defined as the sum of the degree of confusion and the degree of color change from the original image. Several colored images obtained by the proposed method were compared with the originals by red–green dichromatic observers who judged them to be clearer, thereby confirming that the proposed method was effective for color rendering for universal design. © 2008 Wiley Periodicals, Inc. Col Res Appl, 33, 203–211, 2008     

Thermal properties of ethylene ionomers

The annealing effect of ethylene ionomers annealed at various temperatures and for various periods was studied by differential scanning calorimetry. Two endothermic melting peaks were observed for all the ethylene ionomers annealed. The melting peak at the lower temperature, which was assigned to bundlelike crystal owing to a Hoffman-Weeks relationship, shifted to a higher temperature with the annealing temperature and period, indicative of recrystallization. There is physical cross-linking consisting of ionic aggregates, such as multiplets and clusters in ethylene ionomers. The crystallization kinetics of ethylene ionomers was fundamentally similar, but different from that of low-density polyethylene. Crystallization and recrystallization suggested a mobile ethylene chain in both amorphous regions and ionic aggregates even in the presence of cross-linking.     

Time-series primitive static states for detailing work state and flow of human-operated work machine

This paper proposes a quantification method for a comprehensive work flow in construction work for describing work states in more detail on the basis of analyzing state transitions of primitive static states (PSS), which consist of 16 symbolic work states defined by using on-off state of the lever operations and joint loads for the manipulator and end-effector. On the basis of the state transition rules derived from a transition-condition analysis, practical state transitions (PST), which are common and frequent transitions in arbitrary construction work, are defined. PST can be classified into essential state transition (EST) or nonessential state transitions (NST). EST extracts common phases of work progress and estimates positional relations between a manipulator and an object. NST reveals wasted movements that degrade the efficiency and quality of work. To evaluate comprehensive work flows modeled by combining EST and NST, work-analysis experiments using our instrumented setup were conducted. Results indicate that all the PSS definitely changes on the basis of PST under various work conditions, and work analysis using EST and NST easily reveals work characteristics and untrained tasks related to wasted movements.     

Chemospecific ring-opening polymerization of α-methylenemacrolides

α-Methylenemacrolides having various groups, such as aromatic, ether, and amine, were enzymatically, anionically, and radically polymerized. The polymerization with the lipase catalyst successfully afforded polymers only through the ring-opening process, whereas the vinyl polymerizations selectively proceeded by using anionic and radical initiators. The polyesters obtained by the enzymatic polymerization have a polymerizable methacrylic methylene group in the main-chain, in addition to the aromatic and polar groups, and were further radically polymerized to quantitatively produce a cross-linked polymer gel.     

Synthesis of High-Purity Zirconium Fluoride for Fluoride Glass Fibers by Chemical Vapor Deposition

A technique for synthesizing ultra-high-purity ZrF₄ using chemical vapor deposition in a ZrBr₄–HF system is developed and a purification mechanism is clarified. The Fe concentration in ZrF₄ is evaluated at less than 10 ppb based on analysis of the transmission loss spectrum of a fiber prepared using synthesized ZrF₄. Purification is achieved mainly in a sublimation process of ZrBr₄, and purification efficiency is determined by sublimation temperature and activity of impurities in ZrBr₄. The concentration of transition-metal impurities in ZrF₄, synthesized by chemical vapor deposition in the ZrBr₄–HF system, is expected to be less than 1 ppb.     

Gel-size dependence of temperature-induced microphase separation in weakly-charged polymer gels

The gel-size dependence of microphase separation in weakly-charged gels of N-isopropylacrylamide (NIPA) and 1-vinylimidazole (VI) copolymers has been investigated using swelling measurement, small-angle neutron scattering (SANS), and dynamic and static light scattering (DLS/SLS). It is known that weakly-charged polymer gels undergo microphase separation in a poor solvent as a result of competing interactions involving hydrophobic attraction versus electrostatic repulsion. The microphase separation is characterized by a scattering maximum in SANS intensity functions of which Bragg spacing, Λ, is around 20-30 nm. However, when gel size was reduced to the order of Λ, no microphase separation was observed. Instead, a typical scattering of isolated spherical particles was clearly observed. On the basis of the experimental evidence, we conclude that microphase separation has its own wavelength independent of gel size, and nanometer-order gels, i.e., nanogels, do not undergo microphase separation.     

Motion optimization using state-dispersion-based phase space partitions

This paper addresses a phase space partitioning problem in motion planning systems. A class of kinematic and dynamic motion planning systems, including rapid semioptimal motion-planning (RASMO), uses partitions for phase spaces in cumulative optimization criteria. In these systems, a partition results in a uniquely planned motion with a quality that is determined by a selected optimization criterion. In this paper, state-dispersion-based phase space partitioning (SDPP) that generates adaptive partitions is proposed. These partitions allow the motion planning systems to plan better motions. Uniform partitions and adaptively fixed partitions of SDPP are compared under several conditions using RASMO and a double inverted pendulum model while setting the optimality criterion of RASMO to time. The results reveal that RASMO with SDPP plans smaller time motions than those obtained with RASMO using uniform partitions.     

Glass transition behavior of emulsion-polymerized polymer films containing a surface-active agent

The glass transition behavior of emulsion-polymerized poly(methyl methacrylate) and polystyrene films containing sodium laurylsulfate as emulsifier was studied by measurements of dynamic mechanical properties and thermal depolarization current. The film specimens of the emulsion-polymerized polymers were prepared by casting from their benzene solutions. The glass transition temperatures of the emulsion-polymerized films are higher than those of the bulk-polymerized films. The higher glass transition temperature of the emulsion-polymerized films is attributed to the colloidal properties of sodium laurylsulfate in the process of the film formation. The restriction of the molecular chains in the emulsion-polymerized films is attributed to the interaction between the hydrophobic groups of sodium laurylsulfate and the polymer molecules.