Microgravity performance of micro pulsating heat pipes

A micro pulsating heat pipe made of a thin clear Teflon tube of 1.6 mm ID was used to observe the pulsating flow inside a heat pipe under different gravity levels using parabolic flights. More vigorous pulsating flow was observed under microgravity, compared to the depressed movements under hypergravity. Two metallic micro pulsating heat pipes made of an aluminum plate with small internal channels were also tested to investigate the effect of gravity on their heat transfer characteristics. Reduced gravity experiments were performed aboard Falcon 20 aircraft flying parabolic trajectories. Under normal and hypergravity conditions, both the orientation of the pulsating heat pipe and locations of the heated and cooled sections affected the heat transfer performance. Under reduced gravity, however, the heat pipes showed better operating and heat transfer performance than that under normal and hypergravity. These experiments have for the first time confirmed that pulsating heat pipes are capable of operating under reduced gravity and thus are suitable for deployment in space applications such as satellites.     

Combinatorial pulsed laser deposition and thermoelectricity of (La1−xCax)VO3 composition-spread films

La_1−xCa_xVO₃ composition-spread film library was fabricated by combinatorial pulsed laser deposition and their thermoelectric properties were evaluated paralelly by the multi-channel probes of Seebeck coefficient and electric conductivity. Concurrent X-ray analysis verified the formation of solid soluted films in the full composition range (0x1) as judged from the linear variation of the lattice constants. The Seebeck coefficients of La_1−xCa_xVO₃ changed from a large negative value to almost zero with the increase of x, due presumably to the variation of valence in vanadium ions.The power factor in this library was as high as 0.6 μW/cm K², which was obtained at x=0, i.e. pure LaVO₃ grown at 800 °C.     

Flow Structure and Surface Deformation of High Prandtl Number Fluid Under Reduced Gravity and Microgravity

The numerical simulation has been conducted to investigate the flow structure and surface deformation in a liquid bridge of high Prandtl number fluid under reduced gravity and microgravity. The Navier–Stokes equations coupled with the energy conservation equation are solved on a staggered grid, and the mass conserving level set approach is used to capture the free surface deformation of the liquid bridge. The effect of reduced gravity and thermocapillary convection on the surface deformation of the liquid bridge is investigated, and the results show that the amplitude of the surface horizontal vibration decreases gradually, and the thermocapillary convection inside the liquid bridge starts to turn into a steady state after the initial period. Moreover, the shift of the center of the recirculating flow inside the liquid bridge under horizontal external acceleration and zero gravity is also studied, and the results indicate that the vortex centers move initially toward the cold disk and reach an equilibrium position, and then the vortex centers vibrate around the equilibrium position periodically.     

Life cycle CO2 emissions of a photovoltaic/wind/diesel generating system

A photovoltaic/wind/diesel generating system with a battery (PWD system) is discussed from the viewpoint of total CO₂ gas emissions during system lifetime. The total emissions are the sum of the emissions occurring at manufacturing and operating. First, the manufacturing CO₂ emissions of the photovoltaic generator and the wind turbine generator are calculated by “the process analysis method.” This method considers the material used in each generator, its weight and its CO₂ emission rate. On the other hand, the manufacturing CO₂ emissions of the diesel generator and the battery are calculated using “the interindustry (input‐output) table.” Second, the PWD system is operated on a computer so that the fuel consumption of the diesel generator is a minimum assuming that hourly series data of electric load, insolation intensity, wind speed, and air temperature are known during the year. And CO₂ emissions occurring at system operation are obtained from the annual fuel consumption of the diesel generator. The results show that CO₂ total emissions of the PWD system are lower than those of the conventional diesel generator system. The CO₂ total emissions reach a minimum when the photovoltaic/wind generating ratio is 50/50. The CO₂ emissions of manufacturing decrease with increasing of the wind generating ratio from 100/0 to 0/100. The CO₂ total emissions decrease as the natural energy ratio increases. It is, however, saturated to about 60% when the ratio is more than 60%. And the CO₂ total emissions increase with increasing of the battery capacity. It is concluded that the PWD system plays an important role in decreasing considerably the CO₂ total emissions while the total system cost is high under the present price circumstances. © 2001 Scripta Technica, Electr Eng Jpn, 138(2): 14–23, 2002     

Self oscillation phenomena of turbulent jets in a channel

A new method based on the Coanda effect for self oscillation of a circular jet bounded by rectangular enclosure is suggested. The experiments in both air and water reveal regions of stable oscillation wherein relationships are obtained between the Strouhal number and the shape factor of the channel. This oscillation method can also be used to mix different liquids in a vessel. For such applications, an improvement of mixing by oscillation is shown by means of a residual concentration diagram for a salt solution.     

The vapour pressures and heats of sublimation of model disperse dyes

The vapour pressures and heats of sublimation of 23 model disperse dyes have been measured by the vapour saturation method (modified transpiration method). The data obtained were in good agreement with those produced by the other investigators using the effusion method. The heats of sublimation are discussed in terms of molecular structure.     

Low Temperature Phase Transition in C70 and Solvation Effects

The heat capacity of C₇₀ has been measured by adiabatic calorimetry between 14 and 320 K. The orientational phase transition is observed as a broad hump in the heat capacity curve, which is strongly influenced by small amount of solvent remaining in the sample.     

Synthesis of bis(2,4-diphenylbutyl) phthalate and its application as a plasticizer for poly(vinyl chloride) from waste polystyrene

Bis(2,4-diphenylbutyl) phathalate, a plasticizer for poly(vinyl chloride) (PVC), was synthesized from 2,4-diphenyl-1-butene obtained by a thermal decomposition under reduced pressure of waster polystyrene. The heat stability of bis(2,4-diphenylbutyl) phthalate was determined by thermogravimetric analysis and compared with typical plasticizers. It was recognized that bis(2,4-diphenylbutyl) phthalate showed high heat resistant. A test sheet of plasticized PVC with bis(2,4-diphenylbutyl) phthalate and bis(2-ethylhexyl) phthalate was prepared. The test sheet was used for determination of the plasticizing performance of bis(2,4-diphenylbutyl) phthalate. Although the effect of bis(2,4-diphenylbutyl) phthalate imparting flexibility to PVC is poorer than that of bis(2-ethylehexyl) phthalate, the former phthalate is well compatible with PVC and exceedingly heat-resistant.     

Electron-beam-induced-current investigation of GaN/AlGaN/Si heterostructures using scanning transmission electron microscopy

An electron-beam-induced-current technique has been applied to scanning transmission electron microscopy to characterize GaN/AlGaN/n-Si heterostructures. The structure was formed by metalorganic vapor phase epitaxy using AlGaN as an intermediate layer. Two samples with nominal intermediate layer thicknesses of 60 and 120 nm were studied. It was found that there is a junction in the n-type Si region underneath the nitride/Si interface irrespective of the intermediate layer thickness, whereas induced current occurred neither in the nitride region nor at the nitride/Si interface. The junction formed was found to be undulated. The sample with the thin intermediate layer had undulations of a shorter periodicity than that with the thick intermediate layer. The formation of the junction is attributed to the diffusion of Al during the nitride growth.     

Toward an information-integrated control system—the control-theoretic view of intelligent control technology

Recent computing technology is providing alternative strategies for the functionality and implementation of controllers for practical complex systems. An important issue will be how to integrate all information about control problems. In this paper, we present the control-theoretic view of intelligent control technology, and discuss a paradigm for an information-integrated control system. This work was presented, in part, at the Third International Symposium on Artificial Life and Robotics, Oita, Japan, January 19–21, 1998