Benchmark experiment of large-angle scattering reaction cross section of iron at 14 MeV using two shadow bars – Comparison of experimental results with ENDF/B-VIII –

ABSTRACT

It is important to perform neutron transport simulations with accurate nuclear data in the neutronics design of a fusion reactor. However, absolute values of large-angle scattering cross sections vary among nuclear data libraries even for well-examined nuclide of iron. Benchmark experiments focusing on large-angle scattering cross sections were thus performed to confirm the correctness of nuclear data libraries. The series benchmark experiments were performed at a DT neutron source facility, OKTAVIAN of Osaka University, Japan, by the unique experimental system established by the authors’ group, which can extract only the contribution of large-angle scattering reactions. This system consists of two shadow bars, target plate (iron), and neutron detector (niobium). Two types of shadow bars were used and four irradiations were conducted for one experiment, so that contribution of room-return neutrons was effectively removed and only large-angle scattering neutrons were extracted from the measured four Nb reaction rates. The obtained experimental results were compared with calculations for five nuclear data libraries including JENDL-4.0, JEFF.-3.3, FENDL-3.1, ENDF/B- VII, and recently released ENDF/B-VIII. It was found from the comparison that ENDF/B-VIII showed the best result, though ENDF/B-VII showed overestimation and others are in large underestimation at 14 MeV.     

Theoretical estimation of dielectric loss of oxide glasses using nonequilibrium molecular dynamics simulations

To theoretically explore amorphous materials with a sufficiently low dielectric loss, which are essential for next-generation communication devices, the applicability of a nonequilibrium molecular dynamics simulation employing an external alternating electric field was examined using alkaline silicate glass models. In this method, the dielectric loss is directly evaluated as the phase shift of the dipole moment from the applied electric field. This method enabled us to evaluate the dielectric loss in a wide frequency range from 1 GHz to 10 THz. It was observed that the dielectric loss reaches its maximum at a few THz. The simulation method was found to qualitatively reproduce the effects of alkaline content and alkaline type on the dielectric loss. Furthermore, it reasonably reproduced the effect of mixed alkalines on the dielectric loss, which was observed in our experiments on sodium and/or potassium silicate glasses. Alkaline mixing was thus found to reduce the dielectric loss.     

Direct Injection of CRISPR/Cas9-Related mRNA into Cytoplasm of Parthenogenetically Activated Porcine Oocytes Causes Frequent Mosaicism for Indel Mutations

Some reports demonstrated successful genome editing in pigs by one-step zygote microinjection of mRNA of CRISPR/Cas9-related components. Given the relatively long gestation periods and the high cost of housing, the establishment of a single blastocyst-based assay for rapid optimization of the above system is required. As a proof-of-concept, we attempted to disrupt a gene (GGTA1) encoding the α-1,3-galactosyltransferase that synthesizes the α-Gal epitope using parthenogenetically activated porcine oocytes. The lack of α-Gal epitope expression can be monitored by staining with fluorescently labeled isolectin BS-I-B₄ (IB4), which binds specifically to the α-Gal epitope. When oocytes were injected with guide RNA specific to GGTA1 together with enhanced green fluorescent protein (EGFP) and human Cas9 mRNAs, 65% (24/37) of the developing blastocysts exhibited green fluorescence, although almost all (96%, 23/24) showed a mosaic fluorescent pattern. Staining with IB4 revealed that the green fluorescent area often had a reduced binding activity to IB4. Of the 16 samples tested, six (five fluorescent and one non-fluorescent blastocysts) had indel mutations, suggesting a correlation between EGFP expression and mutation induction. Furthermore, it is suggested that zygote microinjection of mRNAs might lead to the production of piglets with cells harboring various mutation types.     

Photocatalytic Property and Electronic Structure of Lanthanide-based Oxysulfides

Lanthanide-based oxysulfides and sulfide, LnTaO_3.5S_0.5, Ln₁₀OS₁₄ (Ln = La, Pr, Nd, Sm) and La₄In₅S₁₃, were successively synthesized by sulfurization in a flowing H₂S. The sulfurization decreased the band-gap energies from >4 eV to <3eV, because of the formation of occupied S3p orbitals on the top of valence band. In accordance with the small band gap, the H₂ evolution from a 0.01 M Na₂S and 0.01 M Na₂SO₃ solution system was observed under irradiation of light up to >500 nm. The rate of H₂ evolution under light irradiation of >500 nm increased in the order of Ni/LaTaO_3.5S_0.5 < Ru/La₁₀OS₁₄ < Pt/La₄In₅S₁₃.     

Determination of a new podophyllotoxin derivative, TOP-53, and its metabolite in rat plasma and urine by high-performance liquid chromatography with electrochemical detection

A high-performance liquid chromatographic method was developed for the determination of a new podophyllotoxin derivative, TOP-53 (I), and TOP-53 glucuronide (II) as its major metabolite in rat plasma and urine. For the analysis of I, the sample was chromatographed on a reversed-phase C18 column with electrochemical detection after consecutive two-step liquid-liquid extractions. Compound II was determined as I after enzymatic hydrolysis of II. This method was validated sufficiently with respect to specificity, accuracy, and precision. The limits of quantitation for both I and II were 2 ng/ml in plasma and 10 ng/ml in urine. The method is thus useful for the pharmacokinetic study of I.     

Case performed: simultaneous surgery for left coronary ostial stenosis and gastric cancer

This report describes a case in which a 68-year-old male underwent two operations simultaneously for left coronary ostial stenosis and gastric cancer. Successfully performed procedures were a single coronary artery grafting with the saphenous vein to the left anterior descending artery, and a subtotal gastrectomy using the Billroth II method. The postoperative course was uneventful and the patient was discharged from the hospital in good condition after 42 days. At present, one-year postoperative, the patient has been visiting the outpatient clinic in healthy condition.     

Transparent ultra-long-haul DWDM networks with "broadcast-and-select" OADM/OXC architecture

We describe an experimental realization of ultra-long-haul (ULH) networks with dynamically reconfigurable transparent optical add-drop multiplexers (OADMs) and optical cross-connects (OXCs). A simple new approach to dispersion management in ULH dense-wavelength-division-multiplexing (DWDM) transparent optical networks is proposed and implemented, which enables excellent transmission performance while avoiding dispersion compensation on a connection-by-connection basis. We demonstrate "broadcast-and-select" node architectures that take full advantage of this method. Our implementation of signal leveling ensures minimum variations of path-averaged power among the wavelength-division-multiplexing (WDM) channels between the dynamic gain-equalizing nodes and results in uniform nonlinear and spontaneous-emission penalties across the WDM spectrum. We achieve 80/spl times/10.7-Gb/s DWDM networking over 4160 km (52 spans/spl times/80 km each) of all-Raman-amplified symmetric dispersion-managed fiber and 13 concatenated OADMs or 320/spl times/320 wavelength-port OXCs with 320-km node spacing. The WDM channels use 50-GHz grid in C band and the simple nonreturn-to-zero (NRZ) modulation format. The measured Q values exhibit more than a 1.8-dB margin over the forward-error correction threshold for 10/sup -15/ bit-error-rate operation. We compare these results with point-to-point transmission of 80/spl times/10-Gb/s NRZ WDM signals over 4160 km without OADM/OXC and provide detailed characterization of penalties due to optical signal-to-noise-ratio degradation, filter concatenation, and crosstalk.     

Determination of three dimensional in situ stress from core discing based on analysis of principal tensile stress

To determine all of the components of in situ stress from core discing, both the directions and magnitudes of the principal in situ stresses must be determined for a disc of a given thickness. In this study, we analyzed the direction and magnitude of tensile stress below an HQ core stub for 11 core lengths using stress conditions under which core discing is likely to occur. First, based on an analysis of the direction of tensile stress below the core stub, we propose a method for determining directions of in situ stress from the height distribution at the periphery of the end surface of a disc. This method can be used with a disc of any thickness. Next, based on an analysis of the magnitude of tensile stress in the central part of a core, we propose a linear criterion for core discing, which can be applied to a core of any length. This criterion was in good agreement with an empirical formula obtained previously in laboratory experiments. By combining information on the direction of in situ stress and the linear criterion for core discing, we propose a method for determining all of the components of in situ stress from core discing under the assumption that vertical stress is given by the overburden stress. Finally, these methods were applied to discs obtained from a field where hydraulic fracturing was performed to measure horizontal stresses. The results showed that the azimuths of the principal stresses estimated from core discing were consistent with those of the principal horizontal stresses determined by hydraulic fracturing and that while the magnitudes of the principal horizontal stresses estimated from core discing showed a large scatter, they were similar to those determined by hydraulic fracturing.