Transient analysis of an advanced static var compensator using quad-series voltage-source PAM inverters

This paper deals with an advanced static Var compensator (ASVC) using quad-series voltage-source PAM inverters. The ASVC consists of four three-phase voltage-source inverters with a common dc capacitor and four three-phase transformers, each primary winding of which is connected in series with each other. Each inverter outputs a square-wave voltage, while the synthesized output voltage of the ASVC has a 24-step wave shape. This results not only in a great reduction of harmonic currents and dc voltage ripples but also in fewer switching and snubbing losses. In this paper, transient analysis is performed with the focus on the response of reactive power and the resonance between the dc capacitor and ac reactors. Experimental results obtained from a small-rated laboratory model of 10 kVA are also shown to verify analytical results based on the p-q transformation. The analytical results help in the design of system parameters such as the capacity of the dc capacitor and feedback gains.     

Sensorless control of synchronous reluctance motors using on‐line parameter identification method not affected by position estimation accuracy

This paper presents a novel on‐line parameter identification method for sensorless control of Synchronous Reluctance Motors (SynRMs). Although conventional sensorless control methods based on mathematical models usually need some complex measurements of motor parameters in advance, the proposed identification method does not require them and can be realized on‐line. The proposed method identifies motor parameters under sensorless control, so rotor position and velocity cannot be used to identify these parameters. However, the proposed method does not need rotor position and velocity, and identified parameters are not affected by these estimation errors. The sensorless control using identified motor parameters is realized, and the effectiveness of the proposed method is verified by experimental results. © 2006 Wiley Periodicals, Inc. Electr Eng Jpn, 155(3): 62–69, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/eej.20258     

Skeletonized hybrid liposomes

Summary Giant hybrid liposomes of polymerizable lipid and cholesterol were prepared by the hydration method and were polymerized by UV irradiation. The obtained giant liposomes were freeze-dried and washed with chloroform to skeletonize the frame structure of the polymerized membrane. The skeletonized liposomes were directly confirmed by scanning electron microscopy. The single-layered and fully spherical liposome frame were easily confirmed by the stereo-pair of the obtained micrographs.     

Downregulation of miR-122-5p Activates Glycolysis via PKM2 in Kupffer Cells of Rat and Mouse Models of Non-Alcoholic Steatohepatitis

Non-alcoholic steatohepatitis (NASH) has pathological characteristics similar to those of alcoholic hepatitis, despite the absence of a drinking history. The greatest threat associated with NASH is its progression to cirrhosis and hepatocellular carcinoma. The pathophysiology of NASH is not fully understood to date. In this study, we investigated the pathophysiology of NASH from the perspective of glycolysis and the Warburg effect, with a particular focus on microRNA regulation in liver-specific macrophages, also known as Kupffer cells. We established NASH rat and mouse models and evaluated various parameters including the liver-to-body weight ratio, blood indexes, and histopathology. A quantitative phosphoproteomic analysis of the NASH rat model livers revealed the activation of glycolysis. Western blotting and immunohistochemistry results indicated that the expression of pyruvate kinase muscle 2 (PKM2), a rate-limiting enzyme of glycolysis, was upregulated in the liver tissues of both NASH models. Moreover, increases in PKM2 and p-PKM2 were observed in the early phase of NASH. These observations were partially induced by the downregulation of microRNA122-5p (miR-122-5p) and occurred particularly in the Kupffer cells. Our results suggest that the activation of glycolysis in Kupffer cells during NASH was partially induced by the upregulation of PKM2 via miR-122-5p suppression.     

A new method for estimating initial rotor phase of self‐excited hybrid‐field synchronous motors

This paper proposes a new method for properly estimating the rotor initial phase (i.e., the position) of the newly emerging self‐excited hybrid‐field synchronous motors (SelE‐HFSMs), which have the rotor held by both a permanent magnet and a diode‐shorted held winding. The proposed method injects a spatially rotating high‐frequency voltage and detects the rotor phase directly by evaluating the norm of the associated current. The method is very simple, but has a high degree of usability. 2010 Wiley Periodicals, Inc. Electr Eng Jpn, 173(3): 49–58, 2010; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/eej.21027     

Group 3 error-free facsimile terminal for analog cellular networks

A Group 3 error-free facsimile terminal for use in an analog cellular network has been developed. This facsimile terminal is provided with the International Telecommunication Union (ITU-T, formerly CCITT) T.30 recommendation protocol and an adaptive error control scheme (AECS) for Group 3 communication and error-free communication. The AECS monitors the channel conditions and selects the optimum error correction code. The ITU-T V.27ter is used as the modulation method and the transmission rate is 4800 bps. This system is compatible with the modified Huffman (MH), modified READ (MR), and modified modified READ (MMR) image data compression codes. The average communication time of this facsimile terminal is 40 s per page while moving through the analog cellular network     

Technology choice and CDM projects in China: case study of a small steel company in Shandong Province

Corporate motives and strategies of both investing and hosting country affect the outcomes of a clean development mechanism (CDM) project—who introduces what technology to whom—and result in large differences in economic viability and the CO₂ emission reductions. This is particularly true for steel industry in which steel making consists of many detailed and complex processes, a given strategy could produce cumulative effects of the individual technologies used, leading to large energy savings overall. The objective of this study is to demonstrate some analytical methods that can be used to quantitatively evaluate the impacts of technology selection on the profit performance of CDM projects. Specifically, in this study we analyze a CDM project to introduce energy saving technology from Japan to a small steel manufacturer in China's Shandong Province, and conduct a simulation of the quantitative relationships between various technology options and profitability. Based on these results, we examine the environmental and economic significance of technology selection for CDM projects. To take this further, we then reconsider the profitability of a project as typical FDI activity (i.e., without the CDM), and by comparing this outcome with the CDM case, we clarify the significance and potential of the CDM.     

Nanoimprinting using release-agent-coated resins

A fluorinated self-assembled monolayer (F-SAM) is mainly used as the antisticking layer. To prevent the F-SAM coated on the nanoimprint lithography (NIL) mold from deteriorating, we propose a new form of nanoimprinting using a release-agent-coated resin. The results from measuring the surface free energy and observations by scanning probe microscopy (SPM) confirmed that the surface free energy, frictional force, and adhesion force of the release-agent spray-coated polymethylmethacrylate (PMMA) were lower than those of PMMA. To prove the release-agent spray-coated PMMA had a releasing effect, we tried to undertake thermal nanoimprinting on it using a mold without F-SAM. The pattern was clearly imprinted on the resin without any signs of adhesion.     

Magnetization distribution of magnetic vortex of amorphous FeSiB investigated by electron holography and computer simulation

The three-dimensional spin structure of the magnetic vortex of FeSiB, an amorphous soft magnetic material, was investigated by holography observation and computer simulation. Magnetization distribution in the neighborhood of the vortex center was estimated from the phase distribution obtained by holography observation. To confirm this magnetization distribution, sample-tilting experiments were performed: when the sample was tilted with respect to the electron beam direction, the phase-image center was found to shift along the tilting axis. Finite-element computer simulation was carried out to estimate the amount of shifts of the phase-image center in the sample tilting from the experimental magnetization distributions in the no sample-tilting conditions. We found that the simulated shifts of the phase-image center were in good agreement with those in the sample-tilting experiment, thus confirming the magnetization distribution near the vortex center obtained by holography observation.