Scene Graph and Frame Update Algorithms for Smooth and Scalable 3D Visualization of Simulated Construction Operations

One of the prime reasons inhibiting the widespread use of discrete-event simulation in construction planning is the absence of appropriate visual communication tools. Visualizing modeled operations in 3D is arguably the best form of communicating the logic and the inner working of simulation models and can be of immense help in establishing the credibility of analyses. New software development technologies emerge at incredible rates that allow engineers and scientists to create novel, domain-specific applications. The authors capitalized on a computer graphics technology based on the concept of the scene graph to design and implement a general-purpose 3D visualization system that is simulation and CAD-software independent. This system, the Dynamic Construction Visualizer, enables realistic visualization of modeled construction operations and the resulting products and can be used in conjunction with a wide variety of simulation tools. This paper describes the scene graph architecture and the frame updating algorithms used in designing the Dynamic Construction Visualizer.     

Impedance measurements on some doped MnO2 electrodes in H2SO4 electrolyte

A.c. impedance behaviour of MnO₂ and doped -MnO₂ electrodes in H₂SO₄ medium was assessed with a view to explaining the mechanism of the discharge behaviour of MnO₂ electrodes in 4m H₂SO₄ electrolyte. The electrodes used in this work appear to be intermediate cases of planar and porous electrodes as the angles, , made by the low frequency part with the real axis are found to be in the range (30–60°). The Nyquist plots and the Randle plots tend to reinforce the observation made by Tye that the capacity yield is essentially diffusion controlled. The depression and flattening of semi-circles observed reveals a link with the heterogeneity of the planar electrode and with the porosity of the pitted electrode. The deviation from a 45° angle made by the low frequency part with the real axis may either be explained by the roughness of the electrode surface or the shallow pores on the surface of the electrodes; in other words due to the difference between the apparent and true surface areas. The double layer capacitance values of the electrodes seem to subsume adsorption capacitances and diffusion factors. Hence, the relative increase in magnitude. The electrodes appear to behave like planar electrodes when 10 µF is introduced into the circuit as a parallel capacitance since angles 0 vary between 40–58°. The undoped -MnO₂ electrode, as well as those prepared from Li-MnO₂, Ag-MnO₂, and I.C.8, appear to be planar electrodes.     

Electrochemical Corrosion and Impedance Studies of Porous Ti–xNb–Ag Alloy in Physiological Solution

Porous titanium (Ti) and its alloys are promising materials for orthopedic applications due to their low elastic modulus, high strength, excellent corrosion resistance, and biocompatibility. In this study, the porous Ti–xNb–5Ag (x = 25, 30 and 35 wt%) alloys were synthesized using the powder metallurgy approach. The effects of Nb content on the porosity, mechanical properties, and electrochemical corrosion behavior of the alloys were investigated. XRD analysis revealed that the porous alloys mainly consist of α-Ti, β-Ti, intermetallic compound (Ti₄Nb), and oxides of TiO₂ and NbO phases. Porous alloys possess the porosity ranging from 57 to 65%, due to the addition of NH₄HCO₃ (45 wt%). Increase in Nb content lead to a reduction in the elastic modulus and compression strengths of the sintered porous Ti–xNb–5Ag alloys. All three developed porous Ti–xNb–5Ag alloys show the optimum combination of elastic modulus and compression strength, which is suitable for orthopedic applications. These porous alloys exhibit excellent electrochemical corrosion resistance in the simulated body fluids, and the samples having low porosity exhibit higher corrosion resistance than high-porosity samples.

     

Tensile behaviour of boron modified Timetal 834 titanium alloy in the intermediate temperature range 400-500 °C

The tensile behaviour of boron modified Timetal 834 titanium alloy was studied in the intermediate temperature range 400-500 °C and compared with that of the base alloy. The yield and ultimate tensile strengths of the B modified alloy were found to be higher than those of the base alloy at all the temperatures investigated. The B modified alloy also exhibited only a marginally lower elongation to failure as compared to the base alloy at all the temperatures investigated. The B modified alloy exhibited dynamic strain aging in the temperature range 400-475 °C which is similar to the observed behaviour in the base alloy.     

Effect of CoFe2O4 mole percentage on multiferroic and magnetoelectric properties of Na0.5Bi0.5TiO3/CoFe2O4 particulate composites

Na_0.5Bi_0.5TiO₃ (NBT), CoFe₂O₄ (CFO) as well as particulate composites containing different mole percentages of NBT and CFO were synthesized by the solid-state sintering route and characterized for their ferroelectric and ferrimagnetic hysteresis loops, magnetostriction and magnetoelectric (ME) output. The mole% of CFO was found to influence the ferroelectric and ferrimagnetic hysteresis loops as well as magnetostriction and piezomagnetic coefficients which in turn had a significant effect on the magnetoelectric voltage coefficient. The highest magnetoelectric voltage coefficient (α) of 0.5 mV/cm/Oe was recorded in (65) NBT–(35) CFO composite.     

Open aluminothermic reduction of columbium (Nb) pentoxide and purification of the reduced metal

This investigation is concerned with the extraction of columbium metal by aluminothermic reduction of its pentoxide in a refractory-lined open reactor. Reduction with 15 pct of aluminum in excess of stoichiometric and priming at the center are found to be optimum parameters. Trials with 3 kg batches of columbium oxide have resulted in high yields of consolidate columbium. Aluminum-reduced columbium has been further processed by electron-beam melting-after prior pyro-vacuum treatment for removal of aluminum, and also directly—and in either case it has been possible to produce pure and ductile columbium. The investigation proceeds to evaluate fused salt electrorefining of the reduced columbium employing NaCl-KCl-K₂CbF₇ bath. Conditions for operating the cell at 90 pct or more current efficiency have been established. Electrorefining has been found to be effective in lowering of most of the impurities in the anode feed. Electrolytic columbium on consolidation by electron-beam melting is found to have a hardness value of 50 Dph. This paper is based upon a thesis to be submitted by G. R. KAMAT in partial fulfillment of the requirements of the degree of Master of Science (Tech.) at the University of Bombay.     

Location of stable and unstable equilibrium configurations using a model trust region quasi-Newton method and tunnelling

A hybrid method for locating multipole equilibrium configurations has been proposed recently. The hybrid method combined the efficiency of a quasi-Newton method capable of locating stable and unstable equilibrium solutions with a robust homotopy method capable of tracking equilibrium paths with turning points and exploiting sparsity of the Jacobian matrix at the same time. A quasi-Newton method in conjunction with a deflation technique is proposed here as an alternative to the hybrid method. The proposed method not only exploits sparsity and symmetry, but also represents an improvement in efficiency.     

The structure of sea urchin spines, large biogenic single crystals of calcite

Sea urchin spines are porous, single crystal Mg-rich calcite [(Mg, Ca)(CO₃)] with a three dimensional meshwork architecture. The crystallographic orientation of large (10 cm in length) spines from Heterocentrotus trigonarius was determined using the X-ray back-reflection Laue technique; the long axis of all spines is parallel to the 00·1 direction of calcite. The internal structure was studied using SEM and TEM. The macropore structure dominated the SEM images, whereas many small (80 nm) protein occlusions can be observed within the single crystal spines using TEM. The spines appeared crystallographically perfect in the TEM. The bend strengths of a group of spines were also determined and varied between 13 and 41 MPa.     

Interactive collision detection in three-dimensional visualizations of simulated construction operations

This paper presents research that led to the design and implementation of fast and interactive collision detection methods that can be used to identify and report undesirable conflicts that occur among static (e.g., structure in-place, idle equipment), dynamic (e.g., active machines and workers), and abstract (e.g., hazard spaces) construction resources in 3D animations of construction operations modeled using discrete-event simulation. Computational efficiency and interactive speed in the designed interference detection methods were the primary challenges that the research addressed. In addition, the efficiency and speed were achieved with minimal trade-off against accuracy. In order to achieve this, the authors capitalized on advanced documented algorithms for proximity queries between arbitrarily moving 3D geometric objects to design mechanisms for interference detection, control, and response in construction process visualizations. The designed methods are implemented in a software tool called C-Collide that integrates as an add-on with the VITASCOPE visualization system.