Tri-Gate Bulk MOSFET Design for CMOS Scaling to the End of the Roadmap

A tri-gate bulk MOSFET design utilizing a low-aspect-ratio channel is proposed to provide an evolutionary pathway for CMOS scaling to the end of the roadmap. 3-D device simulations indicate that this design offers the advantages of a multi-gate FET (reduced variability in performance and improved scalability) together with the advantages of a conventional planar MOSFET (low substrate cost and capability for dynamic threshold-voltage control).     

Anti beta 2glycoprotein I antibodies and lupus anticoagulant in patients with recurrent pregnancy loss: prevalence and clinical significance

Over 2000 electrocution deaths were identified among U.S. construction workers from 1980 to 1991, with the highest mean annual crude mortality rate (2.5 per 100,000 people), and second highest mean age-adjusted rate (2.7 per 100,000 people) of all industries. Although the crude fatality rates showed a downward trend, construction workers are still about four times more likely to be electrocuted at work than are workers in all industries combined. Nearly 40% of the 5083 fatal electrocutions in all industries combined occurred in construction, and 80% were associated with industrial wiring, appliances, and transmission lines. Electrocutions ranked as the second leading cause of death among construction workers, accounting for an average of 15% of traumatic deaths in the industry from 1980 to 1991. The study indicates that the workers most at risk of electrical injury are male, young, nonwhite, and electricians, structural metal workers, and laborers. The most likely time of injury is 11 a.m. to 3 p.m. from June to August. Focusing prevention on these populations and characteristics through better methods of worker and supervisor electrical safety training, use of adequate protective clothing, and compliance with established procedures could minimize the average annual loss of 168 U.S. construction workers.     

Effects of pramipexole on contraversive rotation and functional motor impairments in 1-methyl-4-phenyl1,2,3, 6-tetrahydropyridine-induced chronic hemiparkinsonian monkeys

Rotational and functional motor behavioral changes were studied in five MPTP lesioned chronic hemiparkinsonian Macaca nemestrina monkeys after i.m. pramipexole, a predominant D2 subfamily agonist. Pramipexole induced contraversive rotations in a dose-dependent manner with an optimal dose of 56 microg/kg for approximately 2 to 4 hr after injection. Three different rating scales were used to determine drug-induced functional improvement. They included a monkey parkinsonism rating scale, volitional responses to fruit presentations, and number of hand movements that appeared volitional. A dose of 56 microg/kg of pramipexole produced functional improvements on hand disability, and on a parkinsonian rating scale for monkeys in a dose-dependent manner from 32 to 100 microg/kg. These doses produced an increase in significant hand movements in the affected (contralateral) as well as in the normal (ipsilateral) hand to the side of the brain lesion compared with 5% dextrose in water vehicle control. With a dose of 100 microg/kg, the therapeutic effects of pramipexole on hand movements were less than with 56 microg/kg, due to side effects such as scratching.     

金属蒸气法制备聚合物固载Pd－Cu双金属原子簇

为了不使用任何还原剂而获得聚合物固载高分散零价双金属加氢催化剂，利用金属蒸气法制备了３种不同Ｐｄ／Ｃｕ质量比的聚合物固载双金属原子簇。透射电镜（ＴＥＭ）和Ｘ衍射（ＸＲＤ）测定表明，Ｐｄ－Ｃｕ原子簇粒度很小，平均直径小于３．０ｎｍ。Ｘ射线光电子能谱（ＸＰＳ）表明，Ｐｄ和Ｃｕ均为零价态。Ｐｄ－Ｃｕ原子簇在异丙叉加氢反应中具有很高的活性和选择性。这些结果提供了令人信服的证据，即金属蒸气法可用于在聚合物孔穴内直接而温和地置入小的零价金属原子簇，而且这样制备的聚合物固载金属原子簇很适合于催化应用。     

Pore size control of porous silica by sol-gel process

Porous silica glass was prepared by sol-gel process from tetraethoxysilane (TEOS). The effects of solvents (water, ethanol), drying condition, heat treatment temperature on specific surface area and pore size distribution of porous silica were investigated. Gelation process accelerates with an increase of H₂O content, while retards with the increase of ethanol amount. Structure changes during heat treatment were studied by means of DTA, XRD. TEM micrographs show that the gel particles shrink after heated at 500°C, thus the average pore size decreases.     

Relatively immediate relaxant effects of cholera toxin on isolated rabbit blood vessels

A study was made on the relatively immediate relaxant effect of cholera toxin (CTX) on the isolated ear artery, thoracic aorta and saphenous vein of the rabbit. Both preparations of CTX, containing sodium azide (NaN3) and azide-free, showed no effect on the non-precontracted artery, but CTX containing NaN3 relaxed the moderately precontracted blood vessels with methoxamine promptly, i.e., with a time course of min order. However, the immediate relaxation produced by CTX containing NaN3 was attributed mainly to NaN3. Azide-free CTX, on the other hand, at 1-10 micrograms/ml gradually produced concentration-dependent relaxation of the precontracted vessels. The relaxant effects of CTX on the vessels were slow and long-lasting, i.e., with a time course of 10 min order. The relaxation induced by CTX was not influenced by the removal of endothelium nor by pretreatment with 10 microM indomethacin, 3 microM atropine or 3 microM propranolol. Activation of protein kinase C by a phorbol ester inhibited the relaxant effect of CTX. These results indicate that CTX relaxes the blood vessels by directly acting on the smooth muscles, without mediation by known endogenous relaxing factor, such as endothelium-derived relaxing factor (EDRF = NO) or prostaglandin I2 (prostacyclin) and by muscarinic receptor or beta-adrenoceptor.     

Preparation and optical properties of CdxHg1-xTe doped silica glass

In this paper, the Cd_xHg_1-xTe (x=1-0.7) doped silica glass was prepared through two step sol-gel process and in-situ growth technique from tetraethoxysilane (TEOS), cadmium acetate, mercury acetate and telluric acid. The influence of various factors on the glass was studied. The structure of the microcrystals was investigated by XRD. The absorption and transmittance spectrum of the composite showed that the shift of absorption edge was in conformity with the quantum size effect. The third-order nonlinear optical susceptibility χ⁽³⁾ was measured by the degenerate four wave mixing (DFWM). The values of χ⁽³⁾ was in the range of 10^-11-10^-12 MO esu at wavelength of 1.06 μm.     

A dynamic-programming-based exact algorithm for general single-machine scheduling with machine idle time

This paper proposes an efficient exact algorithm for the general single-machine scheduling problem where machine idle time is permitted. The algorithm is an extension of the authors’ previous algorithm for the problem without machine idle time, which is based on the SSDP (Successive Sublimation Dynamic Programming) method. We first extend our previous algorithm to the problem with machine idle time and next propose several improvements. Then, the proposed algorithm is applied to four types of single-machine scheduling problems: the total weighted earliness-tardiness problem with equal (zero) release dates, that with distinct release dates, the total weighted completion time problem with distinct release dates, and the total weighted tardiness problem with distinct release dates. Computational experiments demonstrate that our algorithm outperforms existing exact algorithms and can solve instances of the first three problems with up to 200 jobs and those of the last problem with up to 80 jobs.     

Gelation of poly(vinyl alcohol) solutions at low temperatures (20 to −78°C) and properties of gels

The flow points of atactic poly(vinyl alcohol) (a-PVA) gels with H₂O/dimethyl sulfoxide (DMSO) = 90/10 (v/v) chilled at 20 to ?78°C for 24 h depended on the chilling temperature and were 0–30°C for gels with the initial polymer concentrations (C_i) of 2–5 g/dL, whereas those for H₂O/DMSO = 50/50 chilled at 0 to ?78°C were independent of the chilling temperature and were 70–75°C. Syneresis occurred after eight cycles of freezing (?24°C) and thawing (20°C) for a-PVA hydrogels at concentrations above C_i = 4 g/dL and two such cycles for syndiotacticity-rich PVA (s-PVA) hydrogels at concentrations above C_i = 1 g/dL. The extent of syneresis per one cycle for s-PVA hydrogels was higher than that for a-PVA hydrogels at the initial cycles. In the a-PVA hydrogels with an initial polymer concentration of ca. 30 g/dL, syneresis was expected not to occur even after 20 cycles. If all the free water in the gels is assumed to have transuded by syneresis after 20 cycles, the residual water is bound water and is estimated to be six water molecules per one vinyl alcohol monomer unit. © 1994 John Wiley & Sons, Inc.     

Oligomer-Rich Fraction from Polydisperse Sample of Poly(bis(β-phenoxyethoxy)phosphazene)

Poly[bis(-phenoxyethoxy)phosphazene] [PBPEP] had been shown in our previous paper to be a very useful polymer for investigating the crystallization mechanism of polymers, as the crystallization rate of PBPEP is extraordinarily small when isothermally crystallized from the melt. The crystallization of the low molecular weight oligomers of PBPEP was first studied in comparison to the high molecular weight polymers. The oligomer-rich fraction was obtained by fractionation of the as-polymerized sample, which had a broad molecular weight distribution. The fractions thus obtained were characterized by solution viscometry and size exclusion chromatography. The melting temperature and the growth rate of the spherulite from the melt were investigated by differential scanning calorimetry and optical microscopy. The growth rate was one or two orders of magnitude smaller in the oligomer-rich fraction than in the other high molecular weight fractions. A collapsed spherulite appeared in the oligomer-rich fraction at high crystallization temperatures. It is speculated that in the oligomer-rich fraction there is an excess free energy due to defects in the crystal phase. This defect is considerably larger in the oligomer-rich fraction than in the other fractions because a large quantity of short length chains is present.