In-situ crystal growth and photoluminescence properties of YBO3: Tb3+ microstructures

Three-dimensional (3D) YBO₃:Tb³⁺ flower-like and dense flower-like hierarchitecture constituted of nanoflakes are solvothermally synthesized in the presence of polyborate precursors in the mixture of ethanol and water. The growth process of the YBO₃:Tb³⁺ flowers and dense flowers was explored based on the time-dependent experiment and the results showed that the growth mechanism follows an in situ growth rather than self-assembly process as reported previously. YBO₃:Tb³⁺ morphologies composed of nanoflakes are achieved by controlling the concentration of ethanol and dependence of photoluminescence on morphology was studied. Remarkable photoluminescence enhancement was observed for YBO₃:Tb³⁺ with flower-like morphology demonstrating the potential of the microstructure in future applications as a green phosphor. Such a synthetic method and growth mechanism may be applied to fabricate complex 3D architectures of other materials.     

A review on the synthesis of in situ aluminum based composites by thermal,mechanical and mechanical–thermal activation of chemical reactions

The aim of the present paper is to review the recent progress in the synthesis of in situ particle reinforced aluminum composites using thermal, mechanical and combined mechanical-thermal activation of aluminothermic reduction reactions. The combination of combustion synthesis (CS) and mechanosynthesis (MS) is the most recent development in the processing of advanced materials like micro and nano aluminum based composites. The combined mechanical thermal synthesis (MTS) has widened the possibilities for both CS and MS. MTS holds great potential for commercial viability and offers exciting processing route for the synthesis of advanced materials. Enhanced reaction kinetics and extended concentration limits in MTS are demonstrated by illustrating the synthesis of aluminum based nanocomposite involving Al–CeO₂.     

Vibration of clamped moderately thick general cross-ply plates using a generalized Navier approach

A hitherto unavailable analytical solution to the free vibration problem of general cross-ply laminated rigidly clamped rectangular plates, incorporating first-order shear deformation, and rotatory and in-plane inertias into the formulation, is presented. A recently developed boundary continuous displacement-based generalized Navier solution technique is used to solve the five highly coupled linear second-order partial differential equations with constant coefficients, and the associated geometric boundary conditions. The assumed solution functions are in the form of double Fourier series, which satisfy the rigidly clamped boundary conditions a priori in a manner similar to the conventional Navier method. Convergence characteristics of the natural frequencies of both symmetric and antisymmetric cross-ply plates are numerically established. Other numerical results presented herein include (i) comparison with the corresponding available first-order shear deformation theory-based Galerkin and classical lamination theory-based boundary-discontinuous analytical solutions, and (ii) study of the effects of thickness and aspect ratio on the natural frequencies.     

GIBC formulation for the resonant frequencies and fielddistribution of a substrate-mounted dielectric resonator

Dielectric resonators (DR's) are widely used in telecommunication systems. A method is proposed here to find the resonant frequency and field distribution in a substrate-mounted DR structure. The field of a dielectric rod has been decomposed into a combination of guided modes with unknown coefficients and an unknown continuous spectrum of radiation field. The unknowns are then obtained by applying two generalized impedance boundary conditions (GIBC's) representing the substrate and air layers at the top and bottom of the DR. This leads to the calculation of the total (guided+radiation) field as well as the resonant frequency of the structure     

Crystallization of glass in fireclay refractories; part III: Detailed study on the mullite crystal size in the ‘synthetic’ glass

Poor-grade fireclay products contain substantial amount of glass. A glass of similar composition was synthesized, nucleated and heat-treated for crystallization of mullite. The size and size-distribution of mullite crystals, the rate of change of size and the aspect ratio of the crystals were investigated in relation to the nucleating agents and temperature.     

An FDTD/ray-tracing analysis method for wave penetration through inhomogeneous walls

A novel method of studying wave penetration through inhomogeneous walls using the hybrid technique based on combining finite-difference time-domain (FDTD) and ray tracing methods is presented . The FDTD method is used to analyze the transmission characteristics of inhomogeneous walls. Using the knowledge of the tangential electric and magnetic field distributions along the borders of the FDTD computation domain, rays are sent out to cover the rest of the environment so that prediction of signal coverage can be made more efficiently without compromising the accuracy. Numerical results of the method have been compared and shown to agree very well with those of measurement and those of full wave analysis. Examples have shown the inadequacy of the traditional ray tracing method in the presence of walls made of concrete blocks. However, the proposed method can accurately predict signal coverage by taking into account the scattered fields by the inhomogeneity inside the walls. The method does not add much to computational complexity. Reduction in computation time is even more significant when the incident waves can be approximated to be plane waves and the wall structure is periodic.     

Mössbauer Study of the Influence of Fe-Si-N Liquid in the Synthesis of β-Si3N4 from Silica

Mössbauer spectra of the products obtained by carbothermal reduction and distribution of silica in the presence of iron in the temperatures range 1200^o to 1540^o were studied. The preponderance of β- Si₃N₄ over the α form at a higher reaction temperature were assumed to be related to the formation of an Fe-Si-N liquid. The liquid did not alter its composition with the variation of reduction-temprature, Iron had no effect on the reaction mechanism below 1300^oC.