Impact of initial moisture content levels,freezing rate and instant controlled pressure drop treatment (DIC) on dehydrofreezing process and quality attributes of quince fruits

Dehydrofreezing process involves water partial removal before freezing. This treatment has been proposed in order to reduce the negative impacts of conventional or even accelerated freezing, especially on the textural quality of high water content fruits and vegetables. Indeed, in such cases, freezing and thawing processes result in severe damage of the integrity of product’s cell structure due to the formation of ice crystals. For this purpose, quince fruits (7?g H₂O/g db) were subjected to convective air drying of 40?°C and 3m/s to reach different water content levels of 2, 1, and 0.3?g H₂O/g db. Freezing profiles obtained at various freezing rates (V₁, V₂, and V₃) for different water contents allowed the main freezing characteristics such as the Initial Freezing Temperature (IFT), the Practical Freezing time (PFt), and the Specific Freezing time (SFt) to be assessed. The impact of freezing rate was important on PFt and SFt, and more pronounced for high water contents (W between 7 and 2?g H₂O/g db (dry basis)). Furthermore, IFT decreased sharply when initial sample water content decreased. Indeed, it started at ?0.8?°C for W?=?7g H₂O/g db, while it reached a value of ?8.2?°C for samples of W?=?1g H₂O/g db. Since convective air drying normally triggers shrinkage which causes a detrimental deformation of fruit structures, instant controlled pressure drop (DIC) treatment was used to improve the texture and enhance the whole dehydrofreezing performance and the final frozen-thawed product quality. Moreover, DIC implied a slight increase of PFt compared to untreated ones. On the other hand, quality attributes were estimated through the assessment of thawed water exudate (TWE g H₂O/100?g db), color and texture (maximum puncture force as index of firmness): freezing rate and water content had great impacts on TWE. Hence, the lower the water content, the weaker the TWE. Furthermore, the TWE of the pre-dried quince (0.3?g H₂O/g db) had higher value for DIC-textured samples than for the un-treated ones. Indeed, DIC-texturing leads to a well-controlled structure expansion of the cell wall. These textural changes resulted in more lixiviation of residual water. Consequently, water becomes more available, hence more releasable after thawing. Finally, the partial removal of water by air drying before freezing remarkably reduced the negative impact of freezing/thawing processes on final quince color. Decisively, the firmness of quince fruit increased with the decrease of water content level.

Abbreviations: DMC: Dry Matter Concentration (%); DIC: Instant controlled pressure drop; W: Water content dry basis (g H₂O/g db); IFT: Initial Freezing Temperature (°C); PFt: Practical Freezing time (min); SFt: Specific Freezing time (min); TWE: Thawed Water Exudate (g H₂O/100?g db); L, a, and b: Color coordinates; (L): The degrees of lightness; (a) and (–a): The redness (a) or greenness (?a), respectively; (b) and (?b): The yellowness (b) or blueness (?b), respectively; ΔE*_ab: Total color difference; L₀, a₀, and b₀: Color coordinates of fresh or dried quince samples; SD: Standard Deviation; ANOVA: Analysis of variances; LSD: Least Significant Differences; cp: Specific Heat of the product depending on composition (dry material and water content)(KJ/kg K); cp_d: Specific Heat of the dry material (KJ/kg K); cp_W: Specific Heat of water (KJ/kg K); V₁: Freezing rate without insulation; V₂: Freezing rate with a food stretch film insulation with thickness e2?=?3?mm and thermal conductivity λ₂?=?0.17 W/m K; V₃: Freezing rate with a versatile flexible insulation (Armacell) with thickness e3?=?13mm and weak thermal conductivity λ₃?=?0.036 W/m K; v_d: Volume of dry material of quince sample (mm³); v_H2O: Volume of quince sample water (mm³); v_t: Total volume of quince sample (mm³); e₀: Quince sample thickness (mm); e₂: Insulation thickness in the case V2; = 3?mm; ; e₃: Insulation thickness in the case V3; = 13?mm; ; λ₀: Quince sample conductivity (W/m K); λ₂: Insulation conductivity in the case V2;?=?0.17 W/m K; ; λ₃: Insulation conductivity in the case V3;?=?0.036 W/m K; λ_d: Conductivity of quince sample dry material (W/m K); λ_H2O: Conductivity of water (W/m K); λ_equiv: Equivalent conductivity of quince sample versus water content (W/m K); m_i and m_f: Weights of the frozen and thawed samples, respectively     

An expressive framework and efficient algorithms for the analysis of collaborative tagging

The rise of Web 2.0 is signaled by sites such as Flickr, del.icio.us, and YouTube, and social tagging is essential to their success. A typical tagging action involves three components, user, item (e.g., photos in Flickr), and tags (i.e., words or phrases). Analyzing how tags are assigned by certain users to certain items has important implications in helping users search for desired information. In this paper, we develop a dual mining framework to explore tagging behavior. This framework is centered around two opposing measures, similarity and diversity, applied to one or more tagging components, and therefore enables a wide range of analysis scenarios such as characterizing similar users tagging diverse items with similar tags or diverse users tagging similar items with diverse tags. By adopting different concrete measures for similarity and diversity in the framework, we show that a wide range of concrete analysis problems can be defined and they are NP-Complete in general. We design four sets of efficient algorithms for solving many of those problems and demonstrate, through comprehensive experiments over real data, that our algorithms significantly out-perform the exact brute-force approach without compromising analysis result quality.     

Robust‐Adaptive Control Strategies for a Time Delay Bioelectrochemical Process Using Interval Observers

The paper addresses the design and the analysis of adaptive and robust‐adaptive control strategies for a complex recycled wastewater treatment bioprocess. The design procedures are developed under the realistic assumptions that the bacterial growth rates are unknown and the influent flow rates are time‐varying and uncertain, but some lower and upper bounds of these uncertainties are known. The proposed control structures are achieved by combining a linearizing control law with an appropriately (asymptotic or interval based) state observer and with a parameter estimator used for on‐line estimation of unknown kinetics. These approaches are applied to a complex time delay bioprocess resulting from the association of a recycling bioreactor with an electrochemical reactor. Numerical simulations are performed in order to validate the proposed algorithms.     

Nonlinear Predictive Control of Fed‐Batch Cultures of Escherichia coli

A strategy for controlling a fed‐batch Escherichia coli culture is described to maintain the culture at the boundary between oxidative and oxido‐fermentative regimes. A nonlinear predictive controller is designed to regulate the acetate concentration, constraining the feed rate to follow an optimal reference profile which maximizes the biomass growth. For the sake of simplicity and efficiency, the original problem is converted into an unconstrained nonlinear programming problem, solved by control vector parameterization techniques. The robustness of the structure is further improved by explicitly including the difference between system and model prediction. A robustness study based on a Monte Carlo approach is used to evaluate the performance of the proposed controller. This control law is finally compared to the generic model control strategy.     

Photochemical transformation of terbutaline (pharmaceutical) in simulated natural waters: Degradation kinetics and mechanisms

In this study, varied nature organic matter isolates were employed to investigate the indirect photo transformation of terbutaline, which is a major feed additive medicine to increase the proportion of lean meat in the livestock. In the indirect photolysis of terbutaline under solar simulated irradiation, ¹O₂ plays an important role among the •OH and ³DOM^∗. The reaction rate constant of ¹O₂ was determined as (7.1 ± 0.3) × 10⁶ M⁻¹ s⁻¹ at pH 7.0, while the reaction rate constant of •OH was (6.87 ± 0.43) × 10⁹ M⁻¹ s⁻¹. The contribution of singlet oxygen to the indirect photolysis of terbutaline (19–44%) was higher than that of the hydroxyl radical (1–7%). The pseudo first order rate constants for the photodegradation of terbutaline increase with increasing pH, which indicates that pH mainly affects the reaction rate of the singlet oxygen with the phenolic part of the terbutaline. The Quinone was identified as the main photosensitized product through LC–MS/MS analysis. It is also proposed that the degradation pathway of terbutaline involves reaction between the phenolic part of terbutaline and singlet oxygen. This finding strongly suggests that singlet oxygen was important factor for the photodegradation of terbutaline in natural waters.     

Microbial Fuel Cell Application for Azoic Dye Decolorization with Simultaneous Bioenergy Production Using Stenotrophomonas sp.

A single‐chamber air‐cathode microbial fuel cell (MFC) was successfully applied for decolorization of the diazoic dye Reactive Black 5 (RB5) with simultaneous production of electricity. An innovative low‐cost medium, the marine water‐glucose‐yeast extract medium (MWGY), was developed which appears as a textile marine effluent in terms of salinity. The anode compartment containing a single bacterial strain of Stenotrophomonas sp. showed almost complete dye decolorization with different RB5 concentrations after seven days of treatment. For the four dye concentrations used, a correlation between dye removal and production of electrical energy was found. The comparison of the decolorization process in the MFC with that in a batch reactor as control experiment highlights the efficiency of the single‐chamber air‐cathode MFC technology which improved the dye removal by the same bacterial strain.     

A comparison of Carlet's second-order nonlinearity bounds

Carlet provides two bounds on the second-order nonlinearity of Boolean functions. We construct a family of Boolean functions where the first bound (the presumed weaker bound) is tight and the second bound is strictly worse than the first bound. We show that the difference between the two bounds can be made arbitrarily large.     

Linearized min‐max robust model predictive control: Application to the control of a bioprocess

This work deals with the problem of trajectory tracking for a nonlinear system with unknown but bounded model parameter uncertainties. First, this work focuses on the design of a robust nonlinear model predictive control (RNMPC) law subject to model parameter uncertainties implying solving a min‐max optimization problem. Secondly, a new approach is proposed, consisting in relating the min‐max problem to a more tractable optimization problem based on the use of linearization techniques to ensure a good trade‐off between tracking accuracy and computation time. The developed strategy is applied in simulation to a simplified macroscopic continuous photobioreactor model and is compared to the RNMPC and nonlinear model predictive controllers. Its efficiency and its robustness against parameter uncertainties and/or perturbations are illustrated through numerical results.